Instrukcja obsługi Bushnell PowerView 2
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bushnell PowerView 2 (22 stron) w kategorii Lornetka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/22
03-22
BINOCULAR OWNER’S GUIDE
POWERVIEW
®
2
2
Thank you for purchasing your new Bushnell® PowerView® 2 binoculars.
This manual will help you optimize your viewing experience by explaining how you can adjust the binocular to your eyes,
and how to care for this instrument. Read the instructions carefully before using your binocular.
NEVER LOOK DIRECTLY AT THE SUN WITH YOUR BINOCULAR,
AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES
EYECUP ADJUSTMENT
Your Bushnell PowerView 2 binocular is fitted with eyecups that provide a comfortable view of the full image and help to
exclude extraneous light. If you need to wear glasses when using binoculars, leave the eyecup in the “down” position (or,
for models with fold down style eyecups, fold them down) (Fig. 1, next page). For use without eyeglasses or sunglasses,
twist up the eyecups . This will place your eyes (or, for models with fold down style eyecups, simply leave them up) (Fig. 2)
farther from the binocular’s ocular lenses, at the correct eye relief distance, allowing you to see the full field of view.
IPD (INTERPUPILLARY DISTANCE) ADJUSTMENT
The spacing between the pupils of your eyes, called “interpupillary distance,” varies from person to person. To match your
binoculars to your IPD or “eye to eye” width:
1. Point them at a white wall or blank area of the sky. Hold the binoculars and view through them as you normally would.
Don’t worry about focus yet.
2. Grasp each side of the binocular firmly. Move the left and right sides closer
together or farther apart until you see a single image with no (Fig. 3, next page)
shaded areas.
FOCUS AND DIOPTER ADJUSTMENT
1. Adjust the eyecups and IPD as described in the previous sections.
2. Using the attached lens cap or your hand, cover the objective lens on the right side
of the binocular.
3. Using the center focus knob, focus on a distant object with fine detail (e.g., brick
wall, tree branches, etc) until it appears as sharp as possible when viewed through
the left side of the binocular.
4. Uncover the objective lens on the right side, and cover the left objective lens while
continuing to view the same object.
ENGLISH
PARTS GUIDE
* under socket cap (compact models are
not tripod adaptable)
** no diopter ring on compact models-
rotate entire right eyecup
Ocular Lens A
Center Focus Knob B
Eyecups C
Tripod Adapter Socket* D
Objective Lens E
Diopter Adjustment Ring** F
A
C
B
D
E
F
Fig. 4 Diopter Adjustment Ring
(10x42 roof prism model shown)
3
5. Rotate the diopter adjustment ring ( located directly below the right eyecup to NOT the center focus knob) (Fig. 4)
bring the object into focus in the right side of the binocular. Note: on the compact 10x and 16x models, there is no
ring; rotate the entire right eyecup to adjust diopter. Avoid over-turning or forcing the diopter mechanism. If you are
unable to bring the object into focus for your right eye by adjusting the diopter ring/eyecup, make sure the left side
is still in focus (repeat steps #2-4 if necessary). The diopter adjustment essentially provides “fine focus” on one side of
the binocular (right only) to allow for slight differences in the vision of your left and right eyes.
6. Your binocular should now be adjusted for your eyes. Focusing for any distance can now be done simply by turning
the center focus knob. Make a note of your diopter setting (position of plus and minus marks on diopter ring relative
to index mark on binocular below the ring) for future reference in case the ring is moved accidentally or by another
person using your binocular.
NECKSTRAP ATTACHMENT
To attach the neckstrap, thread the ends of the neckstrap through the strap lug (Fig.
5) on each side of the binocular, then back through the plastic buckle on the strap
(Fig. 6). Adjust the position of the binoculars on your chest as they hang around
your neck to your preference, by changing the length of the strap section which
passes through the strap channel and buckle by an equal amount on each side.
If you prefer to use an aftermarket strap that has metal O-rings, attach them to a
plastic zip tie placed on the strap lugs rather than installing them directly on the lug,
to avoid damaging the finish on the binocular via contact with the rings.
TRIPOD MOUNTING (compact models are not tripod adaptable)
To attach the binocular to a tripod or monopod, unscrew (10x42 model) or pull off (10x50,
12x50, 20x50 models) the cap which covers the threaded (1/4-20UNC) socket at the far end
of the center hinge , and set it aside in a safe place. Use a compatible binocular tripod (Fig. 7)
adapter accessory (90o angle bracket), such as the Bushnell #161002CM, to attach your full size
PowerView 2 binocular on any standard tripod in a horizontal position, to provide a stable image
during prolonged viewing, or when using high power models such as the 20x50.
Fig. 5 Strap Lug Fig. 6 Strap & Buckle
Fig. 7 Tripod Socket Cap
Fig. 3
Interpupillary Distance (IPD) Adjustment
Fig. 2 Eyecup in “Up” Position
(for use without glasses)
1 Eyecup in “Down” Position
(for use with glasses)
Wide IPD
Narrow IPD
Fold Down Style
Twist-Up Style
Specyfikacje produktu
| Marka: | Bushnell |
| Kategoria: | Lornetka |
| Model: | PowerView 2 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bushnell PowerView 2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Lornetka Bushnell
30 Grudnia 2025
21 Grudnia 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
25 Września 2024
Bushnell Instant Replay Sync Focus 118326 Image View Instrukcja
20 Września 2024
18 Września 2024
Instrukcje Lornetka
- Lornetka Leica
- Lornetka Canon
- Lornetka Nedis
- Lornetka Nikon
- Lornetka Kodak
- Lornetka Minox
- Lornetka Auriol
- Lornetka Trust
- Lornetka Rollei
- Lornetka Crivit
- Lornetka Opticron
- Lornetka Olympus
- Lornetka Pulsar
- Lornetka National Geographic
- Lornetka Maginon
- Lornetka Rocktrail
- Lornetka Carson
- Lornetka Bresser
- Lornetka Alpen Optics
- Lornetka Yukon
- Lornetka Pentax
- Lornetka Berger & Schröter
- Lornetka Levenhuk
- Lornetka Technaxx
- Lornetka Asaklitt
- Lornetka Dörr
- Lornetka Vivitar
- Lornetka Vortex
- Lornetka ATN
- Lornetka Tevion
- Lornetka Cresta
- Lornetka Celestron
- Lornetka Kayoba
- Lornetka Barska
- Lornetka Swarovski Optik
- Lornetka Swarovski
- Lornetka Explore Scientific
- Lornetka AGM
- Lornetka Meade
- Lornetka Focus
- Lornetka Blaser
- Lornetka Traveler
- Lornetka SIG Sauer
- Lornetka Umarex
- Lornetka Steiner
- Lornetka NEWTON
- Lornetka Praktica
- Lornetka Bynolyt
- Lornetka Eagle Optics
- Lornetka Snypex
- Lornetka Meopta
- Lornetka InfiRay
- Lornetka Goview
- Lornetka Eschenbach
- Lornetka Liemke
- Lornetka Sharper Image
- Lornetka Night Owl
- Lornetka Leupold
- Lornetka SVBONY
- Lornetka IGEN
- Lornetka Vanguard
- Lornetka Rexing
- Lornetka Armasight
- Lornetka RIX
- Lornetka PARD
Najnowsze instrukcje dla Lornetka
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025
15 Stycznia 2025