Instrukcja obsługi Bushnell Engage DX 12x50
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bushnell Engage DX 12x50 (22 stron) w kategorii Lornetka. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/22
Model #: BENX1042/BENX1042RB/BENDX1042/BENDX1250/BEN842/BEN1042/BEN1050/BEN1250 12-20
BINOCULAR OWNER’S GUIDE
2
Thank you for purchasing your new Bushnell® Engage™ binoculars.
This manual will help you optimize your viewing experience by explaining how you can adjust the binocular to your eyes,
and how to care for this instrument. Read the instructions carefully before using your binocular.
NEVER LOOK DIRECTLY AT THE SUN WITH YOUR BINOCULAR,
AS IT MAY CAUSE SERIOUS DAMAGE TO YOUR EYES
EYECUP ADJUSTMENT
Your Bushnell Engage binocular is fitted with eyecups that provide a comfortable view of the full image (Fig. 1, next page)
and help to exclude extraneous light. For use without eyeglasses or sunglasses, twist up the eyecups (Fig. 2, next page).
This will place your eyes farther from the binocular’s ocular lenses, at the correct eye relief distance, allowing you to see
the full field of view.
IPD (INTERPUPILLARY DISTANCE) ADJUSTMENT
The spacing between the pupils of your eyes, called “interpupillary distance,” varies from person to person. To match your
binoculars to your IPD or “eye to eye” width:
1. Point them at a white wall or blank area of the sky. Hold the binoculars and view through them as you normally would.
Don’t worry about focus yet.
2. Grasp each side of the binocular firmly. Move the left and right sides closer together or farther apart (Fig. 3, next
page) until you see a single image with no shaded areas.
FOCUS AND DIOPTER ADJUSTMENT
1. First, adjust the eyecups and IPD as described in the previous sections.
2. Using the attached lens cap or your hand, cover the objective lens on the right side of the binocular.
3. Using the center focus knob, focus on a distant object with fine detail (e.g., brick wall, tree branches, etc) until it
appears as sharp as possible when viewed through the left side of the binocular.
4. Uncover the objective lens on the right side, and cover the left objective lens while continuing to view the same object.
5. , Rotate the diopter adjustment ring located directly below the right eyecup (Fig. 4) NOT the center focus knob to bring
the object into focus in the right side of the binocular. On the “BEN” prefix models (not BENX or BENDX), be sure to
unlock the diopter ring first by pulling it up (see Fig. 4). Avoid over-turning or forcing the diopter mechanism. If you
are unable to bring the object into focus for your right eye by adjusting the diopter ring, make sure the left side is still
in focus (repeat steps #2-4 if necessary). The diopter adjustment essentially provides “fine focus” on one side of the
binocular (right only) to allow for slight differences in the vision of your left and right eyes.
PARTS GUIDE
Ocular Lens A
Center Focus Knob B
Twist-Up Eyecups C
Tripod Adapter Socket D
Objective Lens E
Diopter Adjustment
Ring
F
ENGLISH
A
B
C
D
E
F
3
6. Your binocular should now be adjusted for your eyes. Focusing for any distance can
now be done simply by turning the center focus knob. Make a note of your diopter
setting (position of plus and minus marks on diopter ring relative to index mark on
binocular below the ring) for future reference in case the ring is moved accidentally
or by another person using your binocular. The diopter ring can be pushed down
to lock it in place on the “BEN” prefix models to reduce the (not BENX or BENDX)
chance of accidently moving the ring once it has been set for your vision.
NECKSTRAP ATTACHMENT
To attach the neckstrap, thread the ends of the neckstrap through the strap lug
(Fig. 5) on each side of the binocular, then back through the plastic buckle on
the strap . Adjust the position of the binoculars on your chest as they hang (Fig. 6)
around your neck to your preference, by changing the length of the strap section
which passes through the strap channel and buckle by an equal amount on each
side. If you prefer to use an aftermarket strap that has metal O-rings, attach them
to a plastic zip tie placed on the strap lugs rather than installing them directly on
the lug, to avoid damaging the finish on the binocular via contact with the rings.
TRIPOD MOUNTING
To attach the binocular to a tripod or monopod, unscrew the cap which covers the threaded
socket at the far end of the center hinge , and set it aside in a safe place. Use a compatible (Fig. 7)
binocular tripod adapter accessory (90o angle bracket), such as the Bushnell #161002CM, to
attach your Engage binocular to any standard tripod in a horizontal position to provide a stable
image during prolonged viewing.
WATERPROOF / FOGPROOF
Getting caught in a heavy downpour of rain, or accidentally splashing your Engage binocular during a boating excursion
won’t be a problem. The binocular is manufactured and tested to withstand water exposure up to IPX7 standards. Fogproof
protection is achieved from dry Engagegen purging that removes all internal air, which can retain moisture.
All exterior lens surfaces have our new EXO Barrier™ coating (in addition to full multi-coating). EXO Barrier, quite simply,
is the best protective lens coating technology Bushnell has ever developed. Added at the end of the coating process, EXO
Barrier molecularly bonds to the lens and lls the microscopic pores in the glass. The result is an ultra-slick coating that
repels water, oil, fog, dust and debris - rain, snow, ngerprints and dirt will not stick. EXO Barrier is built to last: the bonded
coating will not fade with the passage of time or normal wear and tear.
Fig. 7 Tripod Socket Cap
Fig. 2 Eyecup in “Up” Position
(for use eyeglasses)without
Fig. 1 Eyecup in “Down” Position
(for use with eyeglasses)
Fig. 3
InterPupillary Distance (IPD) Adjustment
Wide IPD
Narrow IPD
Fig. 4 Diopter Adjustment Ring
(Unlocked-model BEN1042)
Fig. 5 Strap Lug Fig. 6 Strap/Buckle
Specyfikacje produktu
| Marka: | Bushnell |
| Kategoria: | Lornetka |
| Model: | Engage DX 12x50 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bushnell Engage DX 12x50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Lornetka Bushnell
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
27 Września 2024
25 Września 2024
Bushnell Instant Replay Sync Focus 118326 Image View Instrukcja
20 Września 2024
18 Września 2024
15 Września 2024
12 Września 2024
Instrukcje Lornetka
- Lornetka Leica
- Lornetka Canon
- Lornetka Nikon
- Lornetka Kodak
- Lornetka Minox
- Lornetka Auriol
- Lornetka Trust
- Lornetka Crivit
- Lornetka Opticron
- Lornetka Olympus
- Lornetka Pulsar
- Lornetka National Geographic
- Lornetka Maginon
- Lornetka Rocktrail
- Lornetka Carson
- Lornetka Bresser
- Lornetka Alpen Optics
- Lornetka Yukon
- Lornetka Pentax
- Lornetka Berger & Schröter
- Lornetka Levenhuk
- Lornetka Technaxx
- Lornetka Asaklitt
- Lornetka Dörr
- Lornetka Vivitar
- Lornetka Vortex
- Lornetka ATN
- Lornetka Celestron
- Lornetka Kayoba
- Lornetka Barska
- Lornetka Swarovski Optik
- Lornetka Swarovski
- Lornetka Explore Scientific
- Lornetka Meade
- Lornetka Focus
- Lornetka Blaser
- Lornetka Traveler
- Lornetka SIG Sauer
- Lornetka Umarex
- Lornetka Steiner
- Lornetka NEWTON
- Lornetka Praktica
- Lornetka Bynolyt
- Lornetka Eagle Optics
- Lornetka Snypex
- Lornetka Meopta
- Lornetka Goview
- Lornetka Eschenbach
- Lornetka Liemke
- Lornetka Night Owl
- Lornetka Leupold
- Lornetka SVBONY
- Lornetka IGEN
- Lornetka Vanguard
- Lornetka Rexing
- Lornetka Armasight
Najnowsze instrukcje dla Lornetka
15 Października 2024
12 Października 2024
10 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024