Instrukcja obsługi Baumr-AG PLTM11BMRA1C0
Baumr-AG
Maszyna do piłowania
PLTM11BMRA1C0
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baumr-AG PLTM11BMRA1C0 (36 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/36
Pole Tool Range
User manual
WARNING!
Read and follow all safety warnings and
instructions carefully before using this
machine. Failure to follow the warnings
and instructions may result in electric
shock, fire and/or serious injury. Save this
manual for future reference.
ATTENTION!
Products covered by this manual will vary
in appearance, assembly, inclusions,
description and packaging.
NOTE!
This manual also covers backpack style
machines with a flexible shaft as well as
options / accessories that may not be
suitable for the machine you have
purchased.
Index
Index ................................................................................................................................................................... 1
Safety Warnings ................................................................................................................................................. 2
Parts Diagram .................................................................................................................................................... 5
Assembly ............................................................................................................................................................ 6
Assembly cont... ................................................................................................................................................. 7
Assembly cont... ................................................................................................................................................. 8
Assembly cont... ................................................................................................................................................. 9
Assembly cont... ............................................................................................................................................... 10
Assembly cont... ............................................................................................................................................... 11
Before Use ....................................................................................................................................................... 12
Starting the engine ........................................................................................................................................... 13
Starting the engine cont… ............................................................................................................................... 14
How to Attach Blades and Accessories ........................................................................................................... 17
Hedge Trimmer ................................................................................................................................................ 18
Pruning Chainsaw ............................................................................................................................................ 19
Maintenance ..................................................................................................................................................... 22
Maintenance cont... .......................................................................................................................................... 23
Transporting/Storage ....................................................................................................................................... 24
Troubleshooting ...............................................................................................................................................25
Troubleshooting cont... .................................................................................................................................... 26
Specifications ................................................................................................................................................... 27
250816124100
2
2
Safety Warnings
It is important you read and
understand the instruction
manual before first use and
keep the manual in a safe
place for future reference.
Safety precautions must be
observed to reduce the risk of
personal injury when
operating this machine.
DANGER! Keep clear of power
lines, contact can cause death.
Like all power equipment this unit must
be handled carefully.
Do not expose yourself or others to danger.
Do not permit others to use this machine
unless they have read this manual and are
trained in its operation. Do not operate if
the equipment is damaged or in an
excessively worn state. To reduce fire
hazards keep the engine and silencer free
of debris leaves or excessive lubricant., Do
not use any attachments or accessories
with the equipment other than the ones
recommended by the supplier. Serious
injury to the operator or bystanders can
result as well as cause damage to the
machine. Always use proper handles and /
or shoulder strap when using the
equipment. Do not use the unit if it is
damaged or poorly adjusted. Never
remove the machine’s guards. Serious
injury to the operator or bystanders could
result as well as damage to the machine.
Never leave the machine running and
unattended. Do not use this unit for any job
other than those for which it is intended as
described in this manual. During or after
operation of the engine, never touch hot
parts such as the muffler, the high voltage
wire or the spark plug. Do not operate the
machine in the rain or under wet
conditions. Always ensure all handles and
guards are fitted when using the machine.
Always keep the machine away from naked
flame or sparks. Always stop the engine
before cleaning / clearing a blockage or
checking, maintenance or working on the
machine.
W orking at heights
Always use a scissor lift, never work on a
ladder or in a tree, never work on an
insecure support and never operate your
unit with one hand. Always be sure of a
safe and secure operating position
especially when working at heights.
Clothing and Equipment
Dress properly. Do not wear loose clothing
or jewellery which can be caught in moving
parts. Use of sturdy gloves, non-skid
footwear, and safety glasses is
recommended;
Always wear ear protection. Loud
noises for an extended period of
time may damage your hearing.
Total face and head protection
must be worn to reduce injury
from falling branches.
Wear no slip heavy duty work -
gloves to improve your grip on
the brush cutter handle. Gloves
also reduce the transmission of
machine vibration to your hands.
The dust, vapour and smoke
produced during operation may
be dangerous to health. If the
work area is very dusty or
smoky, wear a respirator.
Transporting the Machine
The engine should be turned off when the
machine is moved between areas and
when transporting or storing the machine.
Always turn off the engine. Always fit the
blade covers before carrying your tool.
When transporting in a vehicle: properly
secure your machine to prevent turnover,
fuel spillage and damage.
Fuelling
Petrol is an extremely
flammable fuel. Keep clear of
naked flames.
Do not spill any fuel o not smoke near . D
fuel or the machine. Always shut off the
engine before refuelling. Do not fuel a hot
engine – fuel may spill and cause a fire.
Open the fuel cap carefully to allow any
pressure build up in the tank to release -
slowly and avoid fuel spillage. Fuel your
machine only in well ventilated areas. If you
spill fuel, wipe the machine immediately –
if fuel gets on your clothing, change
immediately. To reduce the risk of serious
or fatal burn injuries, check for fuel
leakage. If fuel leakage is found, do not
start or run the engine until leak is fixed.
During Operation
Make sure you always have good balance
and secure footing. Always be aware of
your surroundings and stay alert for
possible hazards that you may not hear
due to the noise of the machine. Never
allow children to access the machine.
Avoid operating while people, especially
children are nearby. To reduce the risk of
injury, do not allow any other persons
within a radius of 25 meters of your own
position. To reduce the risk of damage to
property, also maintain this distance from
other objects (vehicles, windows).
After Finishing Work
Always clean dust and dirt off the machine
– do not use any grease solvents. Always
keep the machine clean, especially, the
fuel tank, its surroundings, and the air
cleaner. After the engine has stopped, the
muffler will still be hot. Never place the
machine in any places where there are
flammable materials such as dry grass,
combustible gases or combustible liquids
etc. Replace cutting tool covers.
Maintenance and Repairs
Service the machine regularly. Do not
attempt any maintenance or repair work
not described in the instruction manual.
Have all other work performed by a
servicing dealer. We recommend that you
have servicing and repair work carried out
exclusively by an authorised service
person. Before proceeding to adjust or
repair the machine, be sure to stop the
engine and detach the spark plug . lead
Never attempt to make engine adjustments
while the unit is strapped to the operator.
Always make engine adjustments with the
unit resting on a flat, clear surface.
Specyfikacje produktu
Marka: | Baumr-AG |
Kategoria: | Maszyna do piłowania |
Model: | PLTM11BMRA1C0 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Baumr-AG PLTM11BMRA1C0, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Baumr-AG
4 Października 2024
29 Września 2024
29 Września 2024
24 Sierpnia 2024
4 Lipca 2024
2 Lipca 2024
2 Lipca 2024
Instrukcje Maszyna do piłowania
- Maszyna do piłowania AEG
- Maszyna do piłowania Worx
- Maszyna do piłowania Milwaukee
- Maszyna do piłowania Stihl
- Maszyna do piłowania Bosch
- Maszyna do piłowania Yato
- Maszyna do piłowania Parkside
- Maszyna do piłowania Global
- Maszyna do piłowania Stiga
- Maszyna do piłowania Toolcraft
- Maszyna do piłowania Festool
- Maszyna do piłowania Bavaria By Einhell
- Maszyna do piłowania MacAllister
- Maszyna do piłowania Stanley
- Maszyna do piłowania Black & Decker
- Maszyna do piłowania Scheppach
- Maszyna do piłowania Proxxon
- Maszyna do piłowania Ford
- Maszyna do piłowania Hazet
- Maszyna do piłowania RIKON
- Maszyna do piłowania Grizzly
- Maszyna do piłowania Gardena
- Maszyna do piłowania DeWalt
- Maszyna do piłowania Einhell
- Maszyna do piłowania Remington
- Maszyna do piłowania Genesis
- Maszyna do piłowania Hyundai
- Maszyna do piłowania Silverline
- Maszyna do piłowania Husqvarna
- Maszyna do piłowania Makita
- Maszyna do piłowania Ozito
- Maszyna do piłowania Draper
- Maszyna do piłowania Fuxtec
- Maszyna do piłowania RYOBI
- Maszyna do piłowania Chicago Pneumatic
- Maszyna do piłowania Flex
- Maszyna do piłowania Yard Force
- Maszyna do piłowania GO/ON
- Maszyna do piłowania DEDRA
- Maszyna do piłowania Sovereign
- Maszyna do piłowania CMI
- Maszyna do piłowania Hilti
- Maszyna do piłowania Sterwins
- Maszyna do piłowania Max Bahr
- Maszyna do piłowania Trotec
- Maszyna do piłowania Dremel
- Maszyna do piłowania Meec Tools
- Maszyna do piłowania AL-KO
- Maszyna do piłowania Güde
- Maszyna do piłowania Texas
- Maszyna do piłowania ATIKA
- Maszyna do piłowania Bavaria
- Maszyna do piłowania Zipper
- Maszyna do piłowania Mafell
- Maszyna do piłowania Florabest
- Maszyna do piłowania Solo
- Maszyna do piłowania Ferrex
- Maszyna do piłowania DURO PRO
- Maszyna do piłowania McKenzie
- Maszyna do piłowania Ergotools Pattfield
- Maszyna do piłowania Fein
- Maszyna do piłowania Ferm
- Maszyna do piłowania Hitachi
- Maszyna do piłowania Herkules
- Maszyna do piłowania Craftsman
- Maszyna do piłowania Matrix
- Maszyna do piłowania Fieldmann
- Maszyna do piłowania Homelite
- Maszyna do piłowania Ridgid
- Maszyna do piłowania Shindaiwa
- Maszyna do piłowania Gardenline
- Maszyna do piłowania PowerPlus
- Maszyna do piłowania Bebe Confort
- Maszyna do piłowania Alpha Tools
- Maszyna do piłowania Hobart
- Maszyna do piłowania Vonroc
- Maszyna do piłowania Spear & Jackson
- Maszyna do piłowania Powerfix
- Maszyna do piłowania HiKOKI
- Maszyna do piłowania McCulloch
- Maszyna do piłowania Proviel
- Maszyna do piłowania Porter-Cable
- Maszyna do piłowania Metabo
- Maszyna do piłowania Bestgreen
- Maszyna do piłowania Cotech
- Maszyna do piłowania Skil
- Maszyna do piłowania Wolfcraft
- Maszyna do piłowania Brennenstuhl
- Maszyna do piłowania Clarke
- Maszyna do piłowania Tryton
- Maszyna do piłowania ACG
- Maszyna do piłowania Sun Joe
- Maszyna do piłowania Maktec
- Maszyna do piłowania Bort
- Maszyna do piłowania Tanaka
- Maszyna do piłowania Power Craft
- Maszyna do piłowania Troy-Bilt
- Maszyna do piłowania Topcraft
- Maszyna do piłowania Gamma
- Maszyna do piłowania Kress
- Maszyna do piłowania Dolmar
- Maszyna do piłowania Duro
- Maszyna do piłowania Qualcast
- Maszyna do piłowania Max
- Maszyna do piłowania IKRA
- Maszyna do piłowania Truper
- Maszyna do piłowania Echo
- Maszyna do piłowania Bruder Mannesmann
- Maszyna do piłowania MTM
- Maszyna do piłowania Meister Craft
- Maszyna do piłowania Batavia
- Maszyna do piłowania Holzmann
- Maszyna do piłowania Graphite
- Maszyna do piłowania Elu
- Maszyna do piłowania Plantiflor
- Maszyna do piłowania Lux Tools
- Maszyna do piłowania Triton
- Maszyna do piłowania BGU
- Maszyna do piłowania Avantco
- Maszyna do piłowania Verto
- Maszyna do piłowania Vulcan
- Maszyna do piłowania Anova
- Maszyna do piłowania Ergofix
- Maszyna do piłowania Challenge Xtreme
- Maszyna do piłowania Maxx
- Maszyna do piłowania Pro-Cut
- Maszyna do piłowania Narex
- Maszyna do piłowania Elektra Beckum
- Maszyna do piłowania Toolson
- Maszyna do piłowania Felisatti
- Maszyna do piłowania Power Smart
- Maszyna do piłowania Backyard Pro Butcher Series
- Maszyna do piłowania Toledo
- Maszyna do piłowania EFA
- Maszyna do piłowania Erbauer
- Maszyna do piłowania Exakt
- Maszyna do piłowania Jonsered
- Maszyna do piłowania Gude Pro
- Maszyna do piłowania MSW
- Maszyna do piłowania Royal Catering
- Maszyna do piłowania Robust
- Maszyna do piłowania Ultranatura
- Maszyna do piłowania FIXIT
- Maszyna do piłowania Einhell Bavaria
- Maszyna do piłowania MyTool
- Maszyna do piłowania Morrison
- Maszyna do piłowania Garland
- Maszyna do piłowania Donau Elektronik
- Maszyna do piłowania TAURUS Titanium
- Maszyna do piłowania Maxbear
- Maszyna do piłowania Stalco
Najnowsze instrukcje dla Maszyna do piłowania
15 Października 2024
15 Października 2024
15 Października 2024
14 Października 2024
14 Października 2024
14 Października 2024
14 Października 2024
14 Października 2024
13 Października 2024
12 Października 2024