Instrukcja obsługi Baumr-AG SX76
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baumr-AG SX76 (34 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/34
Petrol Powered Chainsaws
User Manual
[Revision .0 July 2014 8]
READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY –
DAMAGE AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by
this manual may vary in appearance, assembly, inclusions, specifications, description and packaging.
The product is NOT supplied with engine oil, although traces of oil from the manufacturing
process may be present. It is essential to add adequate engine oil of the correct type to the
engine before use. Failure to add engine oil will void the product warranty.
Petrol Powered Chainsaws
E&OE 8 -AG 2 ©201 Bäumr
Safety
Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or
equipment or property damage if not understood or followed. Safety messages have the following symbols:
You WILL be KILLED or
SERIOUSLY INJURED if you
do not follow instructions.
You CAN be KILLED or
SERIOUSLY INJURED if you
do not follow instructions.
You CAN be INJURED if you
do not follow instructions or
equipment damage may occur.
It is vital that you read and understand
this user manual before using the product,
including safety warnings, and any
assembly and operating instructions.
Keep the manual for future reference.
Safety precautions and recommendations
detailed here must be fully understood
and followed to reduce the risk of injury,
fire, explosion, electrical hazard, and/or
property damage.
Safety information presented here is
generic in nature – some advice may not
be applicable to every product. The term
"equipment" refers to the product, be it
electrical mains powered, battery powered
or combustion engine powered.
• - Before Use If you are not familiar with
the safe operation/handling of the
equipment, or are in any way unsure of
any aspect of suitability or correct use
for your application, you should
complete training conducted by a
person or organization qualified in safe
use and operation of this equipment,
including fuel/electrical handling and
safety.
• Do NOT operate the equipment in
flammable or explosive environments,
such as in the presence of flammable
liquids, gases or dust. The equipment
may create sparks or heat that may
ignite flammable substances.
• Keep clear of moving parts.
•
Equipment may be a potential source of
electric shock or injury if misused.
• Do NOT operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
• Do NOT allow others to use the
equipment unless they have read this
manual and are adequately trained.
• - Keep packaging away from children
risk of suffocation! Operators must use
the equipment correctly. When using
the equipment, consider conditions and
pay due care to persons and property.
General Work Area Safety
• Work areas should be clean and well it.
• Do not operate the equipment if
bystanders, animals etc are within
operating range of the equipment or the
general work area.
• If devices are provided for connecting
dust extraction / collection facilities,
ensure these are connected and used
properly. Dust collection can reduce
dust-related hazards.
General Personal Safety
• Wear appropriate protective equipment
when operating, servicing, or when in
the operating area of the equipment to
help protect from eye and ear injury,
poisoning, burns, cutting and crush
injuries. Protective equipment such as
safety goggles, respirators, non-slip
safety footwear, hard hat, hearing
protection etc should be used for
appropriate equipment / conditions.
Other people nearby should also wear
appropriate personal protective
equipment. Do not wear loose clothing
or jewellery, which can be caught in
moving parts. Keep hair and clothing
away from the equipment.
• Stay alert and use common sense
when operating the equipment. Do not
over-reach. Always maintain secure
footing and balance.
• Do not use the equipment if tired or
under the influence of drugs, alcohol or
medication.
• This equipment is not intended for use
by persons with reduced physical,
sensory or mental capabilities.
General Fuel Safety
•
Petrol/fuel/gasoline is extremely
flammable – keep clear of naked
flames or other ignition sources.
• Do not spill fuel. If you spill fuel, wipe it
off the equipment immediately – if fuel
gets on your clothing, change clothing.
• Do NOT smoke near fuel or when
refuelling.
• Always shut off the engine before
refuelling.
• Do NOT refuel a hot engine.
• Open the fuel cap carefully to allow any
pressure build-up in the tank to release
slowly.
•
Always refuel in well ventilated areas.
• Always check for fuel leakage. If fuel
leakage is found, do not start or run the
engine until all leaks are fixed.
General Carbon Monoxide Safety-
• Using a combustion engine indoors
CAN KILL IN MINUTES. Engine
exhaust contains carbon-monoxide a –
poison you cannot smell or see.
•
Use combustion engines OUTSIDE
only, and far away from windows, doors
and vents.
General Equipment Use and Care
• The equipment is designed for
domestic use only.
• Handle the equipment safely and
carefully.
• Before use, inspect the equipment for
misalignment or binding of moving
parts, loose components, damage or
any other condition that may affect its
operation. If damaged, have the
equipment repaired by an authorised
service centre or technician before use.
• Prevent unintentional starting of the
equipment - ensure equipment and
power switches are in the OFF position
before connecting or moving
equipment. Do not carry equipment
with hands or fingers touching any
controls. Remove any tools or other
items that are not a part of the
equipment from it before starting or
switching on.
• Do not force the equipment. Use the
correct equipment for your application.
Equipment will perform better and be
safer when used within its design and
usage parameters.
• Use the equipment and accessories
etc. in accordance with these
instructions, considering working
conditions and the work to be
performed. Using the equipment for
operations different from those
intended could result in hazardous
situations.
• Always keep equipment components
(engines, hoses, handles, controls,
frames, housings, guards etc) and
accessories (cutting tools, nozzles, bits
etc) properly maintained. Keep the
equipment clean and, where applicable,
properly lubricated.
• Store the equipment out of reach of
children or untrained persons. To avoid
burns or fire hazards, let the equipment
cool completely before transporting or
storing. Never place or store the
equipment near flammable materials,
combustible gases or liquids etc.
• -The equipment is not weather proof,
and should not be stored in direct
sunlight, at high ambient temperatures
or locations that are damp or humid.
• Do not clean equipment with solvents,
flammable liquids or harsh abrasives.
• For specific equipment safety use and
care, see Equipment Safety.
Petrol Powered Chainsaws
E&OE 8 -AG 3 ©201 Bäumr
General Electrical Safety
•
Inspect electrical equipment, extension
cords, power bars, and electrical fittings
for damage or wear before each use.
Repair or replace damaged equipment
immediately.
• Ensure all power sources conform to
equipment voltage requirements and
are disconnected before connecting or
disconnecting equipment.
• When wiring electrically powered
equipment, follow all electrical and
safety codes.
• Wherever possible, use a residual
current device (RCD).
• High voltage / high current power lines
may be present. Use extreme caution
to avoid contact or interference with
power lines. Electrical shock can be
fatal.
General Electrical Safety
• Electrically grounded equipment must
have an approved cord and plug and
be connected to a grounded electrical
outlet.
• Do NOT bypass the ON/OFF switch
and operate equipment by connecting
and disconnecting the electrical cord.
• Do NOT use equipment that has
exposed wiring, damaged switches,
covers or guards.
• Do NOT use electrical equipment in wet
conditions or in damp locations.
• Do NOT use electrical cords to lift,
move or carry equipment.
• Do NOT coil or knot electrical cords,
and ensure electrical cords are not trip
hazards.
General Service Information
• The equipment must be serviced or
repaired at authorised service centres
by qualified personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to
ensure equipment safety is maintained.
• Do NOT attempt any maintenance or
repair work not described in this
manual.
• After use, the equipment and
components may still be hot allow the –
equipment to cool and disconnect spark
plugs and/or electrical power sources
and/or batteries from it before making
adjustments, changing accessories or
performing repair or maintenance.
• Do NOT make adjustments while the
equipment is running.
• Perform service related activities in
suitable conditions, such as a
workshop.
• Replace worn, damaged or missing
warning/safety labels immediately.
Specyfikacje produktu
Marka: | Baumr-AG |
Kategoria: | Maszyna do piłowania |
Model: | SX76 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Baumr-AG SX76, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do piłowania Baumr-AG
4 Października 2024
29 Września 2024
29 Września 2024
24 Sierpnia 2024
4 Lipca 2024
2 Lipca 2024
2 Lipca 2024
Instrukcje Maszyna do piłowania
- Maszyna do piłowania AEG
- Maszyna do piłowania Worx
- Maszyna do piłowania Milwaukee
- Maszyna do piłowania Stihl
- Maszyna do piłowania Bosch
- Maszyna do piłowania Yato
- Maszyna do piłowania Parkside
- Maszyna do piłowania Global
- Maszyna do piłowania Stiga
- Maszyna do piłowania Toolcraft
- Maszyna do piłowania Festool
- Maszyna do piłowania Bavaria By Einhell
- Maszyna do piłowania MacAllister
- Maszyna do piłowania Stanley
- Maszyna do piłowania Black & Decker
- Maszyna do piłowania Scheppach
- Maszyna do piłowania Proxxon
- Maszyna do piłowania Ford
- Maszyna do piłowania Hazet
- Maszyna do piłowania RIKON
- Maszyna do piłowania Grizzly
- Maszyna do piłowania Gardena
- Maszyna do piłowania DeWalt
- Maszyna do piłowania Einhell
- Maszyna do piłowania Remington
- Maszyna do piłowania Genesis
- Maszyna do piłowania Hyundai
- Maszyna do piłowania Silverline
- Maszyna do piłowania Husqvarna
- Maszyna do piłowania Makita
- Maszyna do piłowania Ozito
- Maszyna do piłowania Draper
- Maszyna do piłowania Fuxtec
- Maszyna do piłowania RYOBI
- Maszyna do piłowania Chicago Pneumatic
- Maszyna do piłowania Flex
- Maszyna do piłowania Yard Force
- Maszyna do piłowania GO/ON
- Maszyna do piłowania DEDRA
- Maszyna do piłowania Sovereign
- Maszyna do piłowania CMI
- Maszyna do piłowania Hilti
- Maszyna do piłowania Sterwins
- Maszyna do piłowania Max Bahr
- Maszyna do piłowania Trotec
- Maszyna do piłowania Dremel
- Maszyna do piłowania Meec Tools
- Maszyna do piłowania AL-KO
- Maszyna do piłowania Güde
- Maszyna do piłowania Texas
- Maszyna do piłowania ATIKA
- Maszyna do piłowania Bavaria
- Maszyna do piłowania Zipper
- Maszyna do piłowania Mafell
- Maszyna do piłowania Florabest
- Maszyna do piłowania Solo
- Maszyna do piłowania Ferrex
- Maszyna do piłowania DURO PRO
- Maszyna do piłowania McKenzie
- Maszyna do piłowania Ergotools Pattfield
- Maszyna do piłowania Fein
- Maszyna do piłowania Ferm
- Maszyna do piłowania Hitachi
- Maszyna do piłowania Herkules
- Maszyna do piłowania Craftsman
- Maszyna do piłowania Matrix
- Maszyna do piłowania Fieldmann
- Maszyna do piłowania Homelite
- Maszyna do piłowania Ridgid
- Maszyna do piłowania Shindaiwa
- Maszyna do piłowania Gardenline
- Maszyna do piłowania PowerPlus
- Maszyna do piłowania Bebe Confort
- Maszyna do piłowania Alpha Tools
- Maszyna do piłowania Hobart
- Maszyna do piłowania Vonroc
- Maszyna do piłowania Spear & Jackson
- Maszyna do piłowania Powerfix
- Maszyna do piłowania HiKOKI
- Maszyna do piłowania McCulloch
- Maszyna do piłowania Proviel
- Maszyna do piłowania Porter-Cable
- Maszyna do piłowania Metabo
- Maszyna do piłowania Bestgreen
- Maszyna do piłowania Cotech
- Maszyna do piłowania Skil
- Maszyna do piłowania Wolfcraft
- Maszyna do piłowania Brennenstuhl
- Maszyna do piłowania Clarke
- Maszyna do piłowania Tryton
- Maszyna do piłowania ACG
- Maszyna do piłowania Sun Joe
- Maszyna do piłowania Maktec
- Maszyna do piłowania Bort
- Maszyna do piłowania Tanaka
- Maszyna do piłowania Power Craft
- Maszyna do piłowania Troy-Bilt
- Maszyna do piłowania Topcraft
- Maszyna do piłowania Gamma
- Maszyna do piłowania Kress
- Maszyna do piłowania Dolmar
- Maszyna do piłowania Duro
- Maszyna do piłowania Qualcast
- Maszyna do piłowania Max
- Maszyna do piłowania IKRA
- Maszyna do piłowania Truper
- Maszyna do piłowania Echo
- Maszyna do piłowania Bruder Mannesmann
- Maszyna do piłowania MTM
- Maszyna do piłowania Meister Craft
- Maszyna do piłowania Batavia
- Maszyna do piłowania Holzmann
- Maszyna do piłowania Graphite
- Maszyna do piłowania Elu
- Maszyna do piłowania Plantiflor
- Maszyna do piłowania Lux Tools
- Maszyna do piłowania Triton
- Maszyna do piłowania BGU
- Maszyna do piłowania Avantco
- Maszyna do piłowania Verto
- Maszyna do piłowania Vulcan
- Maszyna do piłowania Anova
- Maszyna do piłowania Ergofix
- Maszyna do piłowania Challenge Xtreme
- Maszyna do piłowania Maxx
- Maszyna do piłowania Pro-Cut
- Maszyna do piłowania Narex
- Maszyna do piłowania Elektra Beckum
- Maszyna do piłowania Toolson
- Maszyna do piłowania Felisatti
- Maszyna do piłowania Power Smart
- Maszyna do piłowania Backyard Pro Butcher Series
- Maszyna do piłowania Toledo
- Maszyna do piłowania EFA
- Maszyna do piłowania Erbauer
- Maszyna do piłowania Exakt
- Maszyna do piłowania Jonsered
- Maszyna do piłowania Gude Pro
- Maszyna do piłowania MSW
- Maszyna do piłowania Royal Catering
- Maszyna do piłowania Robust
- Maszyna do piłowania Ultranatura
- Maszyna do piłowania FIXIT
- Maszyna do piłowania Einhell Bavaria
- Maszyna do piłowania MyTool
- Maszyna do piłowania Morrison
- Maszyna do piłowania Garland
- Maszyna do piłowania Donau Elektronik
- Maszyna do piłowania TAURUS Titanium
- Maszyna do piłowania Maxbear
- Maszyna do piłowania Stalco
Najnowsze instrukcje dla Maszyna do piłowania
15 Października 2024
15 Października 2024
15 Października 2024
14 Października 2024
14 Października 2024
14 Października 2024
14 Października 2024
14 Października 2024
13 Października 2024
12 Października 2024