Instrukcja obsługi Baumr-AG PS3

Baumr-AG Maszyna do piłowania PS3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baumr-AG PS3 (18 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/18

THE BATTERY MAY A H VE SOME CHARGE ON ARRIVAL, IT IS IMPORTANT

HOWEVER THAT THE BATTERY T IS CHARGED PRIOR O USE.

User Manual

[Revision 20238 .0 May ]

READ THIS MANUAL CAREFULLY BEFORE USE FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE AND –

MAY VOID WARRANTY. • . • Products covered by this manual may vary in KEEP THIS MANUAL FOR FUTURE REFERENCE

appearance, assembly, inclusions, specifications, description, and packaging.

PS3 Pole Saw Kit

E&OE © -AG 2 2023 Baumr

Safety

Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or

equipment or property damage if not understood or followed. Safety messages have the following symbols:

You WILL be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be KILLED or

SERIOUSLY INJURED if you do

not follow instructions.

You CAN be INJURED if you do

not follow instructions or equipment

damage may occur.

It is vital that you read and understand this

user manual before using the product,

including safety warnings, and any assembly

and operating instructions. Keep the manual

for future reference.

Safety precautions and recommendations

detailed here must be fully understood and

followed to reduce the risk of injury, fire,

explosion, electrical hazard, and/or property

damage.

Safety information presented here is generic

in nature – some advice may not be

applicable to every product. The term

"equipment" refers to the product, be it

electrical mains powered, battery powered or

combustion engine powered.

• - If you are not familiar with the Before Use

safe operation/handling of the equipment or

are in any way unsure of any aspect of

suitability or correct use for your

application, you should complete training

conducted by a person or organization

qualified in safe use and operation of this

equipment, including fuel/electrical handling

and safety.

• Do NOT operate the equipment in

flammable or explosive environments, such

as in the presence of flammable liquids,

gases or dust. The equipment may create

sparks or heat that may ignite flammable

substances.

• Keep clear of moving parts.

• Equipment may be a potential source of

electric shock or injury if misused.

• Do NOT operate the equipment if it is

damaged, malfunctioning or is in an

excessively worn state.

• Do NOT allow others to use the equipment

unless they have read this manual and are

adequately trained.

• Keep packaging away from children - risk

of suffocation! Operators must use the

equipment correctly. When using the

equipment, consider conditions and pay

due care to persons and property.

General Work Area Safety

• Work areas should be clean and well it.

• Do not operate the equipment if

bystanders, animals etc are within

operating range of the equipment or the

general work area.

• If devices are provided for connecting dust

extraction / collection facilities, ensure

these are connected and used properly.

Dust collection can reduce dust-related

hazards.

General Personal Safety

• Wear appropriate protective equipment

when operating, servicing, or when in the

operating area of the equipment to help

protect from eye and ear injury, poisoning,

burns, cutting and crush injuries. Protective

equipment such as safety goggles,

respirators, non-slip safety footwear, hard

hat, hearing protection etc should be used

for appropriate equipment / conditions.

Other people nearby should also wear

appropriate personal protective equipment.

Do not wear loose clothing or jewellery,

which can be caught in moving parts. Keep

hair and clothing away from the equipment.

• Stay alert and use common sense when

operating the equipment. Do not over-

reach. Always maintain secure footing and

balance.

• Do not use the equipment if tired or under

the influence of drugs, alcohol or

medication.

• This equipment is not intended for use by

persons with reduced physical, sensory or

mental capabilities.

General Fuel Safety

• Petrol/fuel/gasoline is extremely flammable

– keep clear of naked flames or other

ignition sources.

• Do not spill fuel. If you spill fuel, wipe it off

the equipment immediately – if fuel gets on

your clothing, change clothing.

• Do NOT smoke near fuel or when

refuelling.

• Always shut off the engine before

refuelling.

• Do NOT refuel a hot engine.

• Open the fuel cap carefully to allow any

pressure build-up in the tank to release

slowly.

• Always refuel in well ventilated areas.

• Always check for fuel leakage. If fuel

leakage is found, do not start or run the

engine until all leaks are fixed.

General Carbon-Monoxide Safety

• Using a combustion engine indoors CAN

KILL IN MINUTES. Engine exhaust

contains carbon-monoxide – a poison you

cannot smell or see.

• Use combustion engines OUTSIDE only,

and far away from windows, doors and

vents.

General Equipment Use and Care

• The equipment is designed for domestic

use only.

• Handle the equipment safely and carefully.

• Before use, inspect the equipment for

misalignment or binding of moving parts,

loose components, damage or any other

condition that may affect its operation. If

damaged, have the equipment repaired by

an authorised service centre or technician

before use.

• Prevent unintentional starting of the

equipment - ensure equipment and power

switches are in the OFF position before

connecting or moving equipment. Do not

carry equipment with hands or fingers

touching any controls. Remove any tools or

other items that are not a part of the

equipment from it before starting or

switching on.

• Do not force the equipment. Use the

correct equipment for your application.

Equipment will perform better and be safer

when used within its design and usage

parameters.

• Use the equipment and accessories etc. in

accordance with these instructions,

considering working conditions and the

work to be performed. Using the equipment

for operations different from those intended

could result in hazardous situations.

• Always keep equipment components

(engines, hoses, handles, controls, frames,

housings, guards etc) and accessories

(cutting tools, nozzles, bits etc) properly

maintained. Keep the equipment clean and,

where applicable, properly lubricated.

• ore the equipment out of reach of St

children or untrained persons. To avoid

burns or fire hazards, let the equipment

cool completely before transporting or

storing. Never place or store the equipment

near flammable materials, combustible

gases or liquids etc.

• The equipment is not weather-proof, and

should not be stored in direct sunlight, at

high ambient temperatures or locations that

are damp or humid.

• Do not clean equipment with solvents,

flammable liquids or harsh abrasives.

• For specific equipment safety use and care,

see Equipment Safety.

PS3 Pole Saw Kit

E&OE © -AG 3 2023 Baumr

General Electrical Safety

• Inspect electrical equipment, extension

cords, power bars, and electrical fittings for

damage or wear before each use. Repair or

replace damaged equipment immediately.

• Ensure all power sources conform to

equipment voltage requirements and are

disconnected before connecting or

disconnecting equipment.

• When wiring electrically powered

equipment, follow all electrical and safety

codes.

• Wherever possible, use a residual current

device (RCD).

• High voltage / high current power lines may

be present. Use extreme caution to avoid

contact or interference with power lines.

Electrical shock can be fatal.

General Electrical Safety

• Electrically grounded equipment must have

an approved cord and plug and be

connected to a grounded electrical outlet.

• Do NOT bypass the ON/OFF switch and

operate equipment by connecting and

disconnecting the electrical cord.

• Do NOT use equipment that has exposed

wiring, damaged switches, covers or

guards.

• Do NOT use electrical equipment in wet

conditions or in damp locations.

• Do NOT use electrical cords to lift, move or

carry equipment.

• Do NOT coil or knot electrical cords, and

ensure electrical cords are not trip hazards.

General Service Information

• The equipment must be serviced or

repaired at authorised service centres by

qualified personnel only.

• Replacement parts must be original

equipment manufacturer (OEM) to ensure

equipment safety is maintained.

• Do NOT attempt any maintenance or repair

work not described in this manual.

• After use, the equipment and components

may still be hot – allow the equipment to

cool and disconnect spark plugs and/or

electrical power sources and/or batteries

from it before adjusting, changing

accessories or performing repair or

maintenance.

• Do adjust while the equipment is NOT

running.

• Perform service related activities in suitable

conditions, such as a workshop.

• Replace worn, damaged or missing

warning/safety labels immediately.

Introduction and Security

Never allow children or anyone unfamiliar with these instructions to use the garden tool. Children should be supervised to ensure that they do not

play with the device.

Intended Use

• This device is intended exclusively for the care of trees and shrubs in private areas. It is not suitable for felling trees, not for sawing plastic,

masonry or building materials that are not made of wood.

• The device is in accordance with the instructions in this manual-given descriptions and safety instructions. Any other use is improper. Incorrect

use will invalidate the warranty and result in the manufacturer rejecting any responsibility. The user is responsible for all damage to third parties

and their property. Only operate the device in the technical condition specified and delivered by the manufacturer. Unauthorized changes to the

device exclude the manufacturer's liability for any resulting damage.

General Safety Instructions for Power Tools

• WARNING! Read all safety warnings and instructions. Failure to follow the safety instructions and instructions can result in electric shock, fire and

/ or serious injury.

• Keep all safety notices and instructions for future use.

• The term power tool used in the safety instructions refers to mains-operated power tools (with a power cord) and to battery-operated power tools

(without a power cord).

Work Area Safety

• Keep your work area clean and well-lit. Cluttered or dark work areas can lead to accidents.

• Do not work with the power tool in potentially explosive environments in which there are flammable liquids, gases or dust. Power tools generate

sparks that can ignite the dust or fumes.

• Keep children and other people away while using the power tool. If you are distracted, you can lose control of the device.

Electrical Safety

• The power tool plug must match the socket. The plug must not be modified in any way. Do not use adapter plugs together with protective earthed

power tools. Unchanged plugs and matching sockets reduce this risk of electric shock.

• Avoid body contact with earthed surfaces such as pipes, heaters, stoves, and refrigerators. There is an increased risk of electric shock if your

body is grounded.

• Keep power tools away from rain or moisture. Water getting into a power tool increases the risk of electric shock.

• Do not misuse the cable to carry the power tool, hang it up or to pull the plug from the socket. Keep the cord away from heat, oil, sharp edges, or

moving parts of the device. Damaged or tangled cables increase the risk of electric shock.

• When working with a power tool outdoors, only use extension cords that are also suitable for outdoor use. Applying one for outdoors suitable

extension cord reduces the risk of electric shock.

Personal Safety

• Be attentive, pay attention to what you are doing, and use common sense when working with a power tool. Do not use a power tool when you are

tired or under the influence of drugs, alcohol, or under the influence of any medication. A moment of inattention while using the power tool can

result in serious injury.

• Wear personal protective equipment and always protective glasses. Wearing personal protective equipment, such as a dust mask, non-slip safety

shoes, hard hat or hearing protection, depending on the type and use of the power tool, reduces the risk of injuries.

Specyfikacje produktu

Marka:	Baumr-AG
Kategoria:	Maszyna do piłowania
Model:	PS3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Baumr-AG PS3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Baumr-AG

Baumr-AG PC3 Instrukcja

4 Października 2024

Baumr-AG SC7 Instrukcja

29 Września 2024

Baumr-AG SC5 Instrukcja

29 Września 2024

Baumr-AG PS3 Instrukcja

10 Września 2024

Baumr-AG SX82 Instrukcja

24 Sierpnia 2024

Baumr-AG SX76 Instrukcja

4 Lipca 2024

Baumr-AG SX45 Instrukcja

2 Lipca 2024

Baumr-AG PLTM11BMRA1C0 Instrukcja

2 Lipca 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Makita 5603 Instrukcja

15 Października 2024

MSW -TAS287 Instrukcja

15 Października 2024

MSW T-SAW300 Instrukcja

15 Października 2024

Black & Decker KS650 Instrukcja

14 Października 2024

Black & Decker GKC3630L20 Instrukcja

14 Października 2024

Ferm FKS-165 Instrukcja

14 Października 2024

Royal Catering RCBS-1650 Instrukcja

14 Października 2024

Royal Catering RCBS-1650.1ECO Instrukcja

14 Października 2024

Husqvarna 365H Instrukcja

13 Października 2024

Makita DJV181Z Instrukcja

12 Października 2024