Instrukcja obsługi Audio-Technica AT-PL120


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Audio-Technica AT-PL120 (11 stron) w kategorii Sprzęt DJ-ski. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/11
Direct Drive Professional
Stereo Turntable
AT-PL120
Installation and Operation
2
Direct Drive Professional Stereo Turntable
Installation and Operation
To prevent electric shock, do not remove the
cover. There are no user-serviceable parts
inside. Internal adjustments are for qualified
professionals only. Refer all servicing to
qualified service personnel.
Pour prévenir un choc électrique, ne pas ouvrir
le couvercle. Il n’y aucune pièces de rechanges
à l’intérieur. Tout ajustement interne doit être
fait par une personne qualifié seulement.
Référez tout réparation au personnel qualifié.
Para reducir el riesgo de descargas eléctricas,
no se abra la cubierta. No existen partes de
reemplazo para que el usuario pueda reparar por dentro el apara-
to. Deje cualquier clase de mantenimiento en manos de técnicos
especializados.
AVIS
RISQUE DE CHOC ÉLECTRIQUE
NE PAS OUVRIR
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Warning: To prevent fire or shock hazard, do
not expose this appliance to rain or moisture.
Attention: Pour prévenir feu ou choc
électrique, ne pas exposé l’appareil à la pluie
ou à l’humidité.
Cuidado: Para evitar descargas eléctricas o el
peligro de incendio, no exponga este aparato a la lluvia o humedad.
Thank you for purchasing the AT-PL120. Audio-Technica has
been a leading manufacturer of innovative stereo phonograph
products for more than 40 years. We are pleased to provide this
turntable, with its excellent performance and many convenient
features, for your enjoyment.
The AT-PL120 stereo turntable system features the following:
Direct drive high-torque motor
Selectable 33/45/78 rpm speeds
Selectable internal stereo phono pre-amplifier
S-shaped tone arm assembly with:
Adjustable counterweight
Anti-skate adjustment
Tone arm height adjustment and lock
Tone arm lift with hydraulic action and lift lever
Tone arm rest with locking mechanism
Selectable high-accuracy quartz-controlled pitch lock
Selectable +/–10% or +/– 20% pitch adjustment ranges
Stroboscopic platter speed indicator
Forward and reverse play
Cast aluminum record platter with slip mat
Start/stop button with remote start/stop input
Pop-up stylus target light
45-rpm adapter with storage receptacle
Receptacle for extra headshell
Adjustable feet for leveling
Removable hinged dust cover
To assure maximum satisfaction from this product, please read
the information and follow the instructions presented in this
manual. Please keep the manual in an accessible location for
future reference.
We suggest that you save all the packaging materials for
possible future storage, moving, or shipping.
Caution: To avoid stylus damage, make certain the included
stylus guard is in place whenever the turntable is being
installed, moved, or cleaned.
Introduction
Caution: To prevent electric shock, do not
use the polarized plug with an extension cord,
receptacle, or other type of electrical outlet
unless the wide blade can be easily inserted
into a matching slot.
Attention: Pour éviter toute décharge
électrique, ne pas utiliser la prise polarisée avec un cordon de
prolongation, réceptacle ou tout autre dispositif électrique, à
moins que la broche large puisse s’insérer facilement dans un
trou de même taille.
Precaución: Para evitar descargas eléctricas, no use clavijas
polarizadas con una extension de cable, receptáculo, u otro tipo
de toma eléctrica a menos que el conductor plano más ancho
de la clavija pueda insertarse facilmente en el ranura del enchufe
que le corresponde.
PRECAUCION: RIESGO DE DESCARGAS ELECTRICAS
NO SE ABRA
3
Main Features
Figure 1 Main Features
PHONO OUT LINE OUT
11 5
1. POWER DIAL
Controls power to the unit.
2. START/STOP BUTTON
Engages and disengages the motor/platter.
3. PLATTER SPEED BUTTONS
Select 33 or 45 RPM platter speed. (Note: 78 RPM is
selected by pressing the 33 and 45 buttons
simultaneously.)
4. PLATTER
Cast aluminum platter mounts directly to center
spindle/motor shaft.
5. STROBE DOTS (On platter edge)
Operate in conjunction with stroboscopic light located
under power dial (1) to provide visual indication of accurate
platter speeds.
6. CENTER SPINDLE
Precision-machined platter mount on motor shaft.
7. 45-RPM ADAPTER (Shown in receptacle)
Adapts 7” records with large center holes to fit center
spindle.
8. DUST COVER HINGE HOLDERS
Attachment points for removable hinged dust cover.
9. HEADSHELL RECEPTACLE
Storage receptacle for extra headshell (not included).
10. TONE ARM ASSEMBLY
Refer to Figure 2 on page 4 for details.
2
7
11
10
11. DIRECTION BUTTON
Controls platter’s rotational direction:
F – Forward (clockwise)
R – Reverse (counter-clockwise)
12. PITCH ADJUST SLIDE CONTROL
Use in conjunction with pitch button (15) to vary the
platter’s rotational speed. In the center detent position
quartz lock is active.
13. PITCH SELECTION INDICATOR
Shows Green for standard or locked RPM setting, or Red
for a pitch-adjusted setting.
14. QUARTZ SPEED LOCK
Toggles between internal quartz-locked reference and
variable pitch controlled by pitch adjust slide control (12).
15. PITCH BUTTON
Selects the range of pitch variation permitted by the pitch
adjust slide control (12). (See page 7 for information on
locking or adjusting platter speed.)
16. POPUP STYLUS TARGET LIGHT
Provides illumination directed at the stylus position for
easier cueing in poor light.
17. VOLTAGE SELECTOR SWITCH
(Access through holes in platter)
Selects operating voltage (115V or 230V AC, 50/60 Hz).
18. PRE-AMP SELECTOR SWITCH
(Access through holes in platter)
Allows the internal stereo phono pre-amp to be bypassed
when the turntable is used with equipment having
magnetic phono inputs.
12
16
6543
1
15 14
13
8 8
18 9
17


Specyfikacje produktu

Marka: Audio-Technica
Kategoria: Sprzęt DJ-ski
Model: AT-PL120

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Audio-Technica AT-PL120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Sprzęt DJ-ski Audio-Technica

Instrukcje Sprzęt DJ-ski

Najnowsze instrukcje dla Sprzęt DJ-ski

Korg

Korg PuttRhythm Instrukcja

10 Grudnia 2024
Vonyx

Vonyx DB20 Instrukcja

4 Grudnia 2024
Vonyx

Vonyx DB10 Instrukcja

4 Grudnia 2024
Festo

Festo CPX-E-CEC-M1 Instrukcja

9 Października 2024
BeamZ

BeamZ StarFuzer Instrukcja

9 Października 2024