Instrukcja obsługi Atlantic SB-900

Atlantic subwoofer SB-900

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Atlantic SB-900 (4 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Instruction Manual
SB-900
High Performance Powered Subwoofer
SB-900 Manual.indd 1 10/18/10 3:19:34 PM
2
Model SB-900 Powered Subwoofer
CAUTION: To reduce the risk of electric shock, do not remove the
cover (or back). No user serviceable parts inside. Refer to qualified per-
sonnel.
WARNING: To reduce the risk of fire or electric shock, do not expose
this appliance to rain or moisture. This device generates a fair amount
of heat. Make sure nothing blocks the ventilation to the rear panel of
the unit.
The lightning flash with arrowhead, with in an equilat-
eral triangle, is intended to alert the user to the presence
of uninsu lated “dangerous voltage” within the product’s
enclosure that may be of sufficient magnitude to consti-
tute a risk of electrical shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating maintenance (servicing) instructions in the
literature accompanying the appliance.
For Future Reference
Record your serial numbers and date of purchase here:
Model Number
Serial Number
Date of Purchase
The serial number is found on the back panel.
Safety Precautions
Safety Precautions
Copyright © 2010 Atlantic Technology International.
Specifications are those in effect at the time of printing. Atlantic Technology reserves
the right to change specifications or designs at any time without notice.
Model SB-900 Specifications
Bass Driver 8” long-throw
Output Power 125W RMS
Distortion (amplifier) <0.5%
Frequency Response 32Hz – 200Hz ±3 dB
Peak Output 103dB SPL into 2000 cubic Feet
Dimensions (WxHxD) 11 x 13 x 13.125 in; 275 x 330 x 333mm
add 1.75" (45mm) H for feet
add 1.5" (38mm) D for knobs & grille
Weight 28lbs/12.7kg
Power Requirements 110-120/220-240V, 50/60Hz, 250W Max
SB-900 Manual.indd 2 10/18/10 3:19:34 PM
3
Instruction Manual
Low Level Input
Use the input to connect to the subwoofer or LFE line out from
your processor/receiver.
High Level Output
Connect main Left/Right speakers here when using the High
Level Input.
High Level Input
If your electronics do not have a line-level sub out, connect the Left-
Right speaker terminals of your electronics to these connections.
Set the SB-900’s crossover to “Lowpass,” and adjust accordingly.
AC Input
Use the included power cord to connect your amplifier to a wall
outlet.
Voltage Select Switch
Voltage switch for use in different countries. This switch will be set
when you receive the unit. Change this setting only when you are
sure your application requires it. For US, the switch should be set
to the 115V position.
Product Serial Number
Write this number in the space provided on page 2 for future
reference.
FOR CONTINUED PROTECTION AGAINST RISK OF FIRE,
REPLACE ONLY WITH SAME TYPE AND RATING OF FUSE
AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK.
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
DOUBLE INSULATION - WHEN SERVICING,
USE ONLY IDENTICAL REPLACEMENT PARTS
SE RIAL
MOD EL
SB-900-BLK Powered Subwoofer
AUTO
OFF ON
PHASE
INVERT NORMAL LEVEL LOWPASS
BYPASS
LOW LEVEL
RIGHT
L / MONOSTATUS
HIGH LEVEL
INPUTOUTPUT
RIGHTRIGHT L / MONOL / MONO
AC INPUT
50-60 HZ 180W MAX
FOR 110-120V, USE T2AL 250V FUSE
FOR 220-240V, USE T1AL 250V FUSE
110-120V
220-240V
MIN MAX 40 220
80
ENGINEERED IN THE USA,
MANUFACTURED IN CHINA
Status LED
This will be green for "on" condition, red for "standby"
Standby Switch
When in ON position, the amplifier will always be on. When in the
AUTO position, the amplifier will be in Automatic Standby Mode.
Phase Switch
This switch allows precise acoustic matching with satellite speaker
systems whose output may be phase reversed. Try in both the
highest and lowest positions — use the position that results in the
strongest bass output.
Bass Level Control
Use this control to set the level of bass desired
Low-Pass Control
An adjustable (55Hz to 200Hz) @ 18dB per octave low-pass
crossover.
Low-Pass Switch
When in the LOW-PASS position, adjustment of the crossover can
be made by the Crossover Control. If being fed a pre-filtered or THX
signal, place the switch at the BYPASS position.
1
4
3
2
10
8
9
SB-900 Subwoofer Rear Panel
Figure 1
2
10
11
4 53
7
12
5
176
8
9
6
11
12
SB-900 Manual.indd 3 10/18/10 3:19:35 PM

Specyfikacje produktu

Marka: Atlantic
Kategoria: subwoofer
Model: SB-900

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Atlantic SB-900, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje subwoofer Atlantic

Atlantic

Atlantic 224 SB Instrukcja

9 Września 2024
Atlantic

Atlantic SB-900 Instrukcja

30 Sierpnia 2024
Atlantic

Atlantic 10e CSB Instrukcja

23 Sierpnia 2024
Atlantic

Atlantic 642e SB Instrukcja

14 Sierpnia 2024
Atlantic

Atlantic IW-28 SUB Instrukcja

4 Lipca 2024
Atlantic

Atlantic SB8 Instrukcja

3 Lipca 2024

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024