Instrukcja obsługi ART Tube MP Studio

ART odbiornik Tube MP Studio

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART Tube MP Studio (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
TUBE MP
TUBE MP
TUBE MP
TUBE MP TUBE MP
PROFESSIONAL TUBE MIC PREAMP
USER’S MANUAL
I
II
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST
This symbol, wherever it appears, This symbol, wherever it appears, alerts
alerts you to the presence of uninsulated you to important operating and maintenance
Dangerous voltage inside the enclosure. Voltage instructions in the accompanying literature.
that may be sufficient to constitute a risk of shock. Please read manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the equipment.
Follow the operating instructions printed in this user guide.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualified technical personnel only.
Power sources:
Only connect the unit to mains power of the type marked on the rear panel.
Power cord:
Use the power cord with sealed mains plug appropriate for your local mains supply as provided with the equipment. If the
provided plug does not fit into your outlet consult your service agent. Route the power cord so that it is not likely to be
walked on, stretched or pinched by items placed upon or against.
Ventilation:
Do not position the unit where the air required for ventilation is impeded. If the unit is to be wall mounted with a 100mm
vesa mounting system, ensure that it is constructed to allow adequate ventilation.
Moisture:
To reduce the risk of fire or electrical shock do not expose the unit to rain, moisture or use in damp or wet conditions. Do
not place a container of liquid on it, which may spill into any openings.
Heat:
Do not locate the unit in a place close to excessive heat or direct sunlight, as this could be a fire hazard. Locate the unit
away from any equipment, which produces heat such as: power supplies, power amplifiers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink spillage and
smoke, especially that associated with smoke machines.
Handling:
To prevent damage to the cosmetics, avoid rough handling or placing the front or rear face on an abrasive surface.
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment take care when lifting, moving or carrying the unit.
Servicing:
Switch off the equipment and unplug the power cord immediately if it is exposed to moisture, spilled liquid, or the power
cord or plug becomes damaged, during a lightning storm or if smoke odor or noise is noted. Refer servicing to qualified
technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.


Specyfikacje produktu

Marka: ART
Kategoria: odbiornik
Model: Tube MP Studio

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART Tube MP Studio, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik ART

ART

ART MPA Gold Instrukcja

21 Września 2024
ART

ART DJ Pre II Instrukcja

4 Września 2024
ART

ART TransX Instrukcja

3 Września 2024
ART

ART HeadAMP V Instrukcja

24 Sierpnia 2024
ART

ART HeadAmp 4 Pro Instrukcja

22 Sierpnia 2024
ART

ART SLA-1 Instrukcja

22 Sierpnia 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik