Instrukcja obsługi ART USB Phono Plus

ART odbiornik USB Phono Plus

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART USB Phono Plus (11 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
USB Phono Plus
Audiophile Computer Interface
Project Series
USER’S MANUAL
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears, This symbol, wherever it appears, alerts you
alerts you to the presence of uninsulated to important operating and maintenance
dangerous voltage inside the enclosure-voltage instructions in the accompanying literature.
that may be sucient to constitute a risk of shock. Please read the manual.
Read instructions:
Retain these safety and operating instructions for future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user manual.
Do not open:
There are no user serviceable parts inside. Refer any service work to qualied technical personnel only.
Power sources:
Connect the units power supply to mains power only of the type described in this user manual or marked on
the power supply.
Power supply:
Use the power supply with sealed mains plug appropriate for your local mains supply as provided with the
equipment. If the provided supply does not t into your outlet consult your service agent. Route the power cord
so that it is not likely to be walked on, stretched or pinched by items placed upon or against it.
Grounding:
Do not defeat the grounding and polarization means of the power supply.
Moisture:
To reduce the risk of re or electrical shock do not expose the unit to moisture or use in damp or wet condi-
tions. Do not place container of liquid on unit.
Heat:
Do not locate the unit close to excessive heat or direct sunlight, as this could cause a re hazard. Locate the
unit away from any equipment, which produces heat such as: power supplies, power ampliers and heaters.
Environment:
Protect from excessive dirt, dust, heat, and vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke machines.
Handling:
Protect the controls from damage during transit. Use adequate padding if you need to ship the unit. To avoid
injury to yourself or damage to the equipment, take care when lifting, moving, or carrying the unit.
Servicing:
Unplug power immediately if equipment is exposed to moisture, the power supply becomes damaged during a
lightning storm or if smoke odor or noise is noted. Refer servicing to qualied technical personnel only.
Installation:
Install the unit in accordance with the instructions printed in the user manual.
3
CONNECTIONS
The connections are RCA-type jacks and are used to connect your turntable, Preamp Phono/Line In
tape, CD, MP3 player, or other analog stereo audio device to the USB Phono Plus Project Serie
Project Serie
Project Serie
Project Serie Project Series
s
s
ss .
The terminal connection on the rear is used to connect the separate ground wire from your Ground
turntable to reduce hum. (This connection is unnecessary for digital output turntables).
The connections are RCA-type jacks that are always connected to the analog input Preamp Line Out
preamp signal for source monitoring or to allow use as a stand-alone phono preamp.
The RCA-type connection is a digital input that overrides the and analog S/PDIF In To USB Opto In
preamp signal connections whenever there is a valid digital signal present that is in S/PDIF format.
This digital signal input is routed to the your computer USB interface for S/PDIF to USB connectivity
only. You cannot connect S/PDIF to analog or analog to S/PDIF with this product. Note:
The and connections provide for Optical digital connections OPTO In To USB OPTO Out From USB
direct to your computer via USB. When there is valid TOSLINK digital signal at the connec-OPTO In
tion it overrides the analog preamp signal connection to the USB interface.
The 1/8-inch Headphone jack on the front is stereo unbalanced and can accommo- Monitor Output
date a wide variety of headphone models. Maximum output level is +6dBu (1.4Vrms).
The USB bus from your computer normally powers the USB Phono Plus
Pro
Pro
Pro
ProProject
ject
ject
ject ject Series
Series
Series
SeriesSeries . A power
connector on the rear allows you to use an optional external power source to reduce the power drawn
from your computer. The USB Phono Plus
Pro
Pro
Pro
ProProject
ject
ject
ject ject Series
Series
Series
SeriesSeries operates from any external power
source that provides 150mA or more @ 7 Volts to 12 Volts DC (either polarity at the tip will work with
our unit) or 9 Volts to 12 Volts AC.
The connector is USB 2.0 compliant and should be used to connect directly to USB To Computer
one of the USB connections on your computer. This connection also powers the USB circuitry inside
the USB Phono Plus Project
Project
Project
ProjectProject Series
Series
Series
Series Series and will power the whole product if no other power source is
available. This connection looks like a standard “USB Audio CODEC” to your computer, and your
computer then controls the sample rate.

Specyfikacje produktu

Marka: ART
Kategoria: odbiornik
Model: USB Phono Plus

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART USB Phono Plus, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik ART

ART

ART MPA Gold Instrukcja

21 Września 2024
ART

ART Precision Phono Pre Instrukcja

16 Września 2024
ART

ART USB Phono Plus Instrukcja

9 Września 2024
ART

ART Digital MPA II Instrukcja

9 Września 2024
ART

ART HeadAMP V Instrukcja

24 Sierpnia 2024
ART

ART PRO MPA II Instrukcja

12 Maja 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024