Instrukcja obsługi ART DJ Pre II

ART odbiornik DJ Pre II

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ART DJ Pre II (12 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/12
Artcessories
User's Manual
IMPORTANT SAFETY INSTRUCTION – READ FIRST
This symbol, whenever it appears,
alerts you to the presence of
uninsulated dangerous voltage
inside enclosure-voltage that may be
sufficient to constitute risk of shock.
This symbol, whenever it appears,
alerts you to important operating
and maintenance instructions in
the accompanying literature.
Please read the manual.
Read Instructions: Retain safety and operating instructions for
future reference. Heed all warnings printed here and on the
equipment. Follow the operating instructions printed in this user
guide.
Do not open: There are no user serviceable parts inside. Refer
any service work to qualified technical personnel only.
Grounding: Only connect the unit to equipment with properly
grounded mains power. Do not defeat the grounding and
polarization means of the power cord plug of the connected
equipment. Do not remove or tamper with the ground
connection on the power cord of the connected equipment.
Environment: Protect from excessive dirt, dust, heat, and
vibration when operating and storing. Avoid tobacco ash, drink
spillage and smoke, especially that associated with smoke
machines.
Handling: Protect the controls from damage during transit. Use
adequate padding if you need to ship the unit. To avoid injury to
yourself or damage to the equipment, take care when lifting,
moving or carrying the unit.
Servicing: Refer servicing to qualified technical personnel.
Installation: Install the unit in accordance with the instructions
printed in the user guide.
INTRODUCTION:
Thanks for purchasing Applied Research and
Technology’s DJPRE II™, a high quality phono preamp
designed for your home and studio. It acts as an
interface between your turntable and your audio
recording system. The analog input capacitance can be
switched between 100pf and 200pf to optimize your
phono cartridge response. A switchable low cut filter
removes turntable rumble while leaving the audio
pristine. The front gain trim control and signal/clip LED
allow you to optimize the preamp's gain for a wide range
of input sources. The built-in low noise phono preamp
circuitry is highly accurate and precisely conforms to the
RIAA standard. The line output jacks are low impedance
and can work with any sound card.
Housed in an aluminum anodized case, the DJPRE II
can be powered by a wide variety of external supplies. If
you need to amplify and EQ your vinyl records to
interface with an audio workstation, sound card, or
monitor system, the DJ PRE II gives you flawless audio
reproduction in a rugged and reliable package.
FEATURES:
High accuracy/low noise preamp
Switchable low-cut rumble filter
Variable preamp gain
Signal present/clip indicator
Selectable cartridge loading
RCA preamp outputs
Heavy duty extruded chassis
Designed and developed in the USA


Specyfikacje produktu

Marka: ART
Kategoria: odbiornik
Model: DJ Pre II

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ART DJ Pre II, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje odbiornik ART

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024