Instrukcja obsługi Anker Make M5
Anker
drukarka 3D
Make M5
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Anker Make M5 (34 stron) w kategorii drukarka 3D. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/34
M5
USER MANUAL
5X Faster, Extra Intelligent.
AnkerMake M5 FDM 3D Printer
V01_EN
Anker Innovations Limited. All rights reserved. AnkerMake and AnkerMake Logo are
trademarks of Anker Innovations Limited, registered in the United States and other
countries. All other trademarks are the property of their respective owners.
Product Name: AnkerMake M5
Model: V8111
0201
Important Safety Instructions
• The power cord shall be connected to socket-outlet with earthing
connection.
• The power supply should be installed near the equipment, and the socket-
outlet must be easily accessible.
• Only use the power cord provided by the manufacturer. Using unauthorized
power cords may cause danger and violate the authorization of the product
and the guarantee.
• The power cord plug is considered as the disconnect device. Once
unplugged, the product is considered to be disconnected from the power
source.
• Do not use the device in an environment where the temperature is too high
or low. Never expose the device to strong sunshine or wet environments.
• The suitable temperature range for the product and its accessories is 59 ℉-
95 ℉/ 15℃-35℃.
• It is recommended to operate the device in an environment with a
temperature that ranges from 59 ℉/15℃ to 77 ℉/25℃.
• When operating, place the device in an environment that has a normal
room temperature and good ventilation.
• This equipment is not suitable for use in locations where children are likely to
be present. This equipment is not intended for use by children.
CAUTION - Moving parts. Keep body parts away from moving parts.
CAUTION - Hot parts. Do not touch.
• Do not use the product in any way other than described herein in order to
avoid personal injury or property damage.
• User should comply with the laws and regulations of his/her corresponding
country and region where the equipment is located (used), abide by
professional ethics, pay attention to safety obligations, and strictly
prohibit the use of our products or equipment for any illegal purposes. Our
company will not be responsible for any violators' legal liability under any
circumstances.
What's in the Box
Check if all items below are included while unboxing. If anything is missing,
please contact our customer service.
M4
M5
M2.5
Platform
Screws Power Cord Filament Toolbox
Gantry Frame Filament Holder
The power cord plug may vary by country or region.
Specyfikacje produktu
| Marka: | Anker |
| Kategoria: | drukarka 3D |
| Model: | Make M5 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Anker Make M5, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje drukarka 3D Anker
29 Września 2024
23 Września 2024
Instrukcje drukarka 3D
- drukarka 3D LulzBot
- drukarka 3D Kodak
- drukarka 3D MakerBot
- drukarka 3D Flashforge
- drukarka 3D Renkforce
- drukarka 3D Velleman
- drukarka 3D Creality
- drukarka 3D Exibel
- drukarka 3D Monoprice
- drukarka 3D XYZprinting
- drukarka 3D Craftbot
- drukarka 3D Leap Frog
- drukarka 3D Anycubic
- drukarka 3D German RepRap
- drukarka 3D Creality3D
- drukarka 3D Wanhao
- drukarka 3D Artillery
- drukarka 3D GooVer
- drukarka 3D Easy Threed
- drukarka 3D Zortrax
- drukarka 3D SINDOH
- drukarka 3D PP3DP
- drukarka 3D Wasp
- drukarka 3D 3D Systems
- drukarka 3D Raise3D
Najnowsze instrukcje dla drukarka 3D
7 Października 2024
7 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024