Instrukcja obsługi Anker Life P2

Anker Zatyczka do uszu Life P2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Anker Life P2 (66 stron) w kategorii Zatyczka do uszu. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/66
USER MANUAL
Soundcore Life P2
English 01 Português 66
Čeština 06 Pусский 71
Dansk Slovenský Jazyk11 76
Deutsch Slovenski Jezik17 81
ελληνικά 21 86Svenska
Español Türkçe26 91
Suomi 31 日本語 96
Français 36 한국어 101
Magyar 41 简体中文 106
Italiano 10 繁體中文 111
Nederlands 51 Portugues do Brasil 116
Norsk 56 ةيِبَرَعلا 121
Język polski 61 ברִית 126
01 EN EN 02
Charging
• Remove the protective lm from the earbuds when using for the rst time.
• Fully charge both the earbuds and the charging case before the rst-time using.
• To prevent damage, use the provided USB-C cable.
• Fully dry off the earbuds and the USB port before charging.
1
RR
2
LED behaviour (Earbuds & Charging case)
Steady white Being Charging
Light off • Fully charged
• Remaining battery >10% (when in use)
Powering On/Off
The earbuds will automatically power on when taken out of the charging case and power off
when placed back into the charging case.
ON OFF
LED behaviour (Earbuds)
ON Steady white for 1 second
OFF Steady red for 1 second
• To manually power on, press the multi-function button on either one of the earbuds.
• To manually power off, press and hold the multi-function button on either one of the
earbuds for 3 seconds.
Pairing
True Wireless Stereo Connection
The right earbud will automatically connect with the left earbud when taken out of the
charging case.
LED behaviour (Earbuds)
Breathing white TWS connecting
Steady white for 1 second TWS connected
• When powered off, press and hold the multi-function button on both earbuds for 1
second, the earbuds will enter TWS connecting mode.
• When powered on and connected, place either one of the earbuds into the charging case,
you can keep using the other one.
• When powered on and connected, if either one of the earbuds is out of battery and
powered off, you can keep using the other one.
• When you are on a call, place either one of the earbuds into the charging case, 3 to 5
seconds later, the microphone in the other earbud will be activated.
Bluetooth Pairing with your Device
The earbuds will enter pairing mode when powered on. You are requested to confirm the
connection when you see a pop-out screen.
03 EN EN 04
Soundcore
Life P2
B tlue ooth Pairing Reque st
“Headset” wo l uld ike
to pair w h youit r iPhone
C el anc Pair
Pair
LED behaviour (Earbuds)
Flashing white Bluetooth pairing
Steady white for 1 second Bluetooth connected
In the pairing process, some devices are incompatible with Qualcomm True Wireless Primary-
Secondary dual pairing names, it may notice “connection unsuccessful” when you tap “Pair”
or even no screen popped out. Don’t worry and it will not inuence the using.
Once successfully paired, the primary earbud connects with your device and transfers signal
to the secondary earbud, the latter one will not connect with your device. As a result, in the
Bluetooth pairing list on your device, it may indicate that only one side is connected while the
other side is not.
• To pair with another Bluetooth device, turn off Bluetooth on the currently connected
device rst.
• Each time you power on your Soundcore earphones, it will automatically connect to your
last successfully connected device if available within the Bluetooth range.
Wearing
1. Choose the ear tips that t your ears the best.
2. Insert the earbuds into the inner canal of your ears.
3. Turn and nd the most comfortable position.
Controls
Play / Pause
1
R\L
Press (R/L)
Next track
R
2
Press twice (R)
Previous track
2
L
Press twice (L)
Volume up / down Control volume via the connected device
Answer / End a call
1
R\L
Press (R/L)
Reject a call
1”
R\L
Press and hold for 1 second (R/L)
Enable mono mode Remove either one of the earbuds off your ear and press and hold
the button on the other earbud for 1 second
Activate Siri or other voice
assistant software
1”
R\L
Voice Assistant Press and hold for 1 second (R/L)
Reset
Reset the earbuds if the earbuds cannot connect with each other properly or cannot connect
with your device properly.
1. Place the earbuds into the charging case and make sure they are being charged.
2. Press and hold the button on both earbuds for 3 seconds until the LED indicators ash red 3
times and then turn white.
All the memory data will be cleared.

Specyfikacje produktu

Marka: Anker
Kategoria: Zatyczka do uszu
Model: Life P2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Anker Life P2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zatyczka do uszu Anker

Anker

Anker SoundBuds Slim Instrukcja

3 Września 2024
Anker

Anker Life P2 Instrukcja

14 Sierpnia 2024

Instrukcje Zatyczka do uszu

Najnowsze instrukcje dla Zatyczka do uszu

Haylou

Haylou GT1 Pro Instrukcja

14 Stycznia 2025
JLab

JLab Epic Sport ANC 3 Instrukcja

14 Stycznia 2025
JLab

JLab Jbuds Sport ANC 4 Instrukcja

14 Stycznia 2025
Motorola

Motorola Moto Buds 125 Instrukcja

11 Stycznia 2025
Motorola

Motorola Moto Buds 500 ANC Instrukcja

11 Stycznia 2025
GMB Audio

GMB Audio TWS-02 Instrukcja

8 Stycznia 2025
Adidas

Adidas FWD-02 Instrukcja

8 Stycznia 2025
Skullcandy

Skullcandy Jib True XT 2 Instrukcja

7 Stycznia 2025
JBL

JBL Endurance Race 2 Instrukcja

5 Stycznia 2025
JBL

JBL Tune Beam 2 Instrukcja

5 Stycznia 2025