Instrukcja obsługi AMX MIO-RCC-KIT

AMX ładowarka do urządzeń mobilnych MIO-RCC-KIT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AMX MIO-RCC-KIT (2 stron) w kategorii ładowarka do urządzeń mobilnych. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Installation Guide

Mio-RCC Rechargeable Upgrade Kit and Charging Base

Mio Remote Charging Base

The Mio series of remotes are complemented either with a Mio-RCC charging

base (FG147-02) or the Mio-RCC rechargeable upgrade kit ( . One FG147-03K)

charging base, a new back housing and a Mio-RBP rechargeable lithium ion

battery (FG147-10) are included with the rechargeable upgrade kit. The charging

base upgrade kit transforms the Mio R-1 and Mio R-2 into a rechargeable

device.

Begin with Installing The Rechargeable Battery on the Mio R-1 and R-2 for the

Mio-RCC rechargeable upgrade kit (FG147-03K) or Charging The Mio Remote

with the Charging Base for the Mio-RCC charging base (FG147-02).

Consult the operation/reference manuals for the Mio R-1, Mio R-2, Mio R-3, or

Mio R-4 remotes for more information. These manuals are available at

www.amx.com.

Specifications

The specifications for the Mio remote charging base and kit are as follows:

Installing The Rechargeable Battery on the Mio R-1 and R-2

1. Flip and turn the device so that the buttons are facing away from you and

the device is upside down.

2. Holding the device in both hands, place your thumbs on the battery door

and push up to slide the battery door free.

3. If present, remove the AAA batteries.

4. Remove the 6 screws shown in FIG. 3.

5. Remove the back housing.

6. Place the new housing on the device so that the rechargeable battery port

connection is now accessible (FIG. 4).

7. Replace the 6 screws.

8. Connect the terminal end of the Lithium Ion battery to the port shown in

FIG. 4. It may be necessary to use a thin, blunt object to fully seat the

battery connector within its port.

FIG. 1 Mio Remote Charging Base

FIG. 2 Mio Remote Charging Base (Top and Bottom view)

Rubber feet

Angle barrel power connector

Charging contacts

(Bottom View)

(Top View)

Mio-RCC Remote Charging Kit (FG147-03K) with Base (FG147-02)

Specifications

Dimensions (HWD) Charging Base - 1.61 (4.09 cm) (height); 4.25 (10.80 cm)

(diameter)

Lithium Ion Battery - 2.13” x 1.38” x .28”

(5.41 cm x 3.45 cm x .71 cm)

Weight • 1.15 lbs (.52 kg) - Remote Charging Cradle

• .15 lbs (.07 kg) - Power Supply

• .06 lbs (.027 kg) - Rechargeable Lithium Battery

Included

Accessories:

• Rechargeable Lithium Ion battery (4 hours battery life) Kit

only

• Back housing Kit only

• Mio-RCC Charging base (FG147-02) with Power Supply

• Power supply Kit only

Other AMX

Equipment:

• Mio-RCC Charging Base (FG147-02) with Power Supply

• Mio R-1 (FG147)

• Mio R-2 RF 418 (FG147-418)

• Mio R-2 RF 433 (FG147-433)

• Mio R-3 (FG148-03)

• Mio R-4 (FG148-04)

• Mio-RBP Rechargeable Lithium Ion Battery (FG147-10)

• AXR-RF 418 MHZ RF Receiver (FG782-418)

• AXR-RF 433 MHZ RF Receiver (FG782-433)

• Mio Modero IR Receiver (FG5797-01xx; xx indicates color)

FIG. 3 6 Screw Points of the Back Housing for the Mio R-1/R-2

6 Screw Points

For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).

11/08

AMX reserves the right to alter specifications without notice at any time.

3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com

93-0147-02 REV: D

9. Press the battery between the rubber pads, with the sticker showing, in

the housing area of the Mio remote. Confirm that the battery is flush with

the bottom of the battery enclosure on the bottom housing.

10. Replace the battery door and slide to lock it in place.

11. Begin charging the battery.

Charging The Mio Remote with the Charging Base

The Mio remotes receive power for charging from a charging base. To recharge

the battery in a Mio remote:

1. Connect the terminal end of the power supply to the bottom external

power port on the Mio remote charging base. See FIG. 2 for the location.

2. Route the cable through the provided channel so that it comes out the

side of the base.

3. Connect the power cord to an external power source.

4. Place the bottom of the Mio remote into the charging base so the contacts

on the device are on top of the charging contacts inside the charging

base. The Power LED on the Mio remote blinks red to indicate it is

charging and illuminates solid red when it is done. Full charge cycle for a

depleted battery is approximately 3 hours.

Avoid placing units equipped with AAA batteries in the charging base.

Changing Battery Modes (Mio R-1 and R-2)

Configuration Mode

The Configuration Mode allows you to set the battery type on the Mio R-1 and

R-2 remotes. To enter Configuration Mode:

1. Press and hold the STOP button and the INPUT button simultaneously.

The two buttons must be pressed within 0.1 seconds of each other and

held down for 2 seconds. The device indicates that you are now in

Configuration Mode. See below for available modes.

Battery Type

2. Pressing button "6" on the remote toggles the battery type between

Normal and Recharge. The display indicates the selected type. The type

of battery dictates the battery type to be selected.

3. Press the EXIT key when you are finished.

Note: Your settings will not be lost in the event your batteries die or are

removed.

FIG. 4 Rechargeable Battery Port on The Mio Remote

Lithium Ion Battery

Rechargeable

Battery

Port Connection

Specyfikacje produktu

Marka:	AMX
Kategoria:	ładowarka do urządzeń mobilnych
Model:	MIO-RCC-KIT
Rodzaj zasilania:	Prąd przemienny
Technologia baterii:	Litowo-jonowa (Li-Ion)
Kompatybilność:	Mio Modero
Wbudowana bateria:	Tak
Typ ładowarki:	Wewnętrzna
Kompatybilność ładowarki:	Zdalne sterowanie
Zasada działania:	Kontakt