Instrukcja obsługi Amplicomms M50

Amplicomms Przenośny M50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Amplicomms M50 (2 stron) w kategorii Przenośny. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

INTRODUCTION

M50 is Amplicomms’s new smartphone for seniors, offering an ampliﬁed

handsfree base. Its many features include:

1 - Easy-to-use interface, with two modes to choose from (Simple and light Android)

2 - Text <=>Speech support for messages, dialling, etc

3 - SOS button

4 - Base: desk top easy-charging base and Bluetooth handsfree device

A- SMARTPHONE DESCRIPTION

1 - Turn ON/OFF the screen;

Power ON/OFF ( Long press )

2 - Volume up key

3 - Volume down key

4 - Front camera

5 - Receiver

6 - Touch screen

7 - Task manager key (Android mode)

8 - Home key

9 - Back key

B- BASE DESCRIPTION

PACKAGE CONTENT

1. M50 smartphone

2. Base

3. Power adaptor with USB cable

4. Instructions manual

GET STARTED

Insert the SIM card (required) and the memory card (optional)

- With the SIM card golden contacts facing down, insert the SIM card into one

of the available slots until it stops as illustrated

- To expand the internal storage memory, you can insert a microSD memory

card (maximum capacity of 64 GB / not included). Insert the memory card into

the slot until it stops as illustrated

Note: Both card slots (SIM1=Micro, SIM2=Micro) support LTE (4G). If nano SIM card is

used, a SIM card adaptor is required ( provided by operator )

ATTENTION:

• Risk of swallowing small objects! The SIM card & memory card can be removed.

Small children can swallow them

• Do not bend or scratch the SIM card. Prevent any contact with water, dirt, or

electrical charges

• Turn off the phone and disconnect the charger before removing the battery cover

Insert the battery

- Insert the battery into battery compartment with golden contacts of the

battery pointing to the top right of the phone

- Press lightly on the bottom end of the battery until it snaps into place

Replace the battery cover

Replace and secure the battery cover until it clicks into place

5. Battery

6. Battery cover

7. Earphones

8. Lanyard

Charging your phone / using the base speaker

- Place the base on a ﬂat surface. Plug provided USB cable to the base and to a

wall mains socket.

- To charge your phone, simply place it on the charger as depicted. M50 can

also be charged as a regular smartphone by plugging the USB cable directly

on the USB connector (Figure A, 12)

- When placed on the cradle, your phone will connect with the base via

Bluetooth. You can answer handsfree calls or listen to music on the base

loudspeaker.

(**A valid Bluetooth pairing between M50 and base is required)

ATTENTION:

• Only use battery, charger and accessories that have been approved for using

with this model. Connecting other accessories may be dangerous and may

invalidate the warranty.

Getting started guide

**Please read this “Getting Started guide” CAREFULLY before start using your

Amplicomms M50. Also check the Instructions Manual for more details.

**Google account is required for your phone to receive software updates. Please sign

in during phone set up or later.

** Pairing the phone with the base (step 8) is .mandatory

1. Insert the SIM card, battery and replace the battery cover.

2. Power up the base (use provided adaptor and USB cable).

3. Long press ON/OFF button to power up the phone.

4. The display will be lighted up.

5. Enter the SIM PIN code (Optional : Service provider dependent)

6. Select the desired language

7. Follow the setup wizard steps on the screen

8. Pair the phone with the base (mandatory step) to be able to answer a call in

handsfree mode and listen to audio sources (radio, music ﬁles). When the smartphone

is on its base but not paired, battery will charge but base keys (including the base’s

“Phone” button) will not be working.

• Swipe with your ﬁnger on the touch screen and press icon on page 2, Settings

then > .Connected devices Pair new device

• Place your M50 on the base charging cradle.

• Tap on when it appears in the device list, then click on “PAIR” M50 Smart Base

(“Allow access to your contacts and call history” is displayed. Tap on the square

to accept, then on “Pair”)

When the base is well paired, a sharp sound is emitted, and base led will turn to

steady blue. By pressing either or base keys you can check that base and

M50 are well paired:

icon will be displayed on the right side.

If base led still ﬂashes in red, repeat step 8.

9. When completed, swipe with your ﬁnger on the touch screen and press

Select Home icon on page 2, to choose between Simple Smartphone and light

Android modes.

Simple Smartphone mode offers an extremely easy to use

interface, speciﬁcally designed for senior users. Check next

chapter to learn about phone operation in this mode.

Light Android mode presents the user with a simpliﬁed

version of a regular smartphone. If you chose this mode,

please read “USING YOUR M50 IN LIGHT ANDROID MODE”.

USING M50 IN SIMPLE SMARTPHONE MODE

When Simple smartphone mode is selected, your M50 will look simpler and easier

to use than a regular smartphone.

Setup Wizard

The ﬁrst time you select Simple Smartphone mode, you will have the choice to

be guided along the most relevant settings by a Setup Wizard. These are:

a. Click Duration (sets click duration for alphanumeric keyboard and other keys**)

b. Wiﬁ setup (if Wiﬁ internet access is available)

c. Google Account

d. Copy Contacts

e. New Contacts

f. SOS and Support

g. Speed Dial

h. Favorite Contacts

i. WhatsApp

j. Advanced Settings

k. Exit Setup

Once you “Exit Setup”, the wizard is always available under Settings.

** Note all touch-screen clicks are by default long click when using Simple Smartphone

mode. A valid key press should have a conﬁrmation vibration.

Click duration can be changed anytime through the wizard or in Advanced Settings.

Home Screen

1 - Silent / Vibrate only / Normal mode

2 - One Touch Speed Dials

3 - Calls Center

4 - Message Center - SMS, missed calls, WhatsApp, etc.

5 - Pictures Center - View photos and videos, use the camera

6 - Other functions such as Whatsapp, phonebook, applications, settings, etc

7 - Battery level

Turn the Phone ON/OFF

- Long press ON/OFF button (1 in the ﬁgure A)

- The display will be lighted up. (To turn off the phone: Power Off Turn off > )

Call from the 3 One-Touch speed dials

- Press one of the 3 One-Touch speed dials directly (2 in the ﬁgure)

- Press to end the call

Make a call

- Press Call Dial number 0......9 Del > > Enter the number (Press to delete)

- Press to dial

- Press to end the call

Call from phonebook

- Press Call > to search and select the number OR

- Press Call Search Search > > enter the 1st character of the contact > > select

the number

- Press to dial

- Press to end the call

Call Log

- Press Call Call Log Phonebook Call Log > or > to view the call log

- To call back the incoming call number, press the number

Receive a call

- Press to answer

- Press to end the call

- When the phone is on the base, you can use button to answer and end the

call in handsfree mode. You can also control the base loudspeaker volume

with and keys.

Adjust the earpiece loudness

- During a call, press Volume up/Volume down keys - to adjust the loudness

Ringer mode

- In idle mode, press > select the ringer mode between / / Sound Silent Vibrate

Message

- All types of messages (SMS, WhatsApp, missed call, etc...) are consolidated in

Message

- When there is a new message, the button will be highlighted with

a new indication

- To read the message, press on the new items to read the details or press

Read old message......

Write new message

- > Message Write a new message

- Input the sending number by > ORDial number Next

- Select from existing phonebook with

- Input from Keyboard > ORSend

- Select the pre-deﬁned simple message by Next

Pictures

- Pictures View Pictures > > move to the next......

(Press All images to see all pictures > / to scroll throught them)

Camera

- Pictures > Take a picture > Camera > Capture to take photo or Record to take video

- Remeber to or the photo......Save Save and Send

Phone Book

Options in this menu:

1. View

2. Edit

3. New Contact

4. Call Log

ADD New contact

- > (or > > )Phone Book New Contact Settings Contacts New

- > input the name > Name Next

- > input the number > ......Number Next

- Save

- You will be asked if you wish to Add a photo from Images or from Camera.

Press Yes or No and follow the instructions on the screen

EDIT Contact

- > (or > > )Phone Book Edit Settings Contact Update

- Select a contact for editing

- > Edit the name > Name Next

- > Edit the number > Number Next......

- (To associate a photo to a contact, go to > > )Save Settings Contacts Photo

Settings

- > ......Settings

- Under the Settings menu, the following options can also be accessed:

1. Contacts

2. Speed Dial

3. Language

4. Advanced Settings

5. Setup Wizard

6. Premium Service

Edit the 3 One-Touch Speed Dial buttons

- > Settings Speed Dial

- Select the empty button

- Choose the number from contact list ( to next page)

- )Add contact to list (Add speed dial photo...... Go to Settings > Contacts > Photo

Add new contact to Favorite contacts in CALL button

- > > Settings Contacts Favorite

- Select the empty button

- Choose the number from contact list ( to next page)

- (Favorite contacts can be selected by pressing )Add contact to list Call

Click duration

Long press duration for menu buttons and text keyboard can be adjusted to be

faster or slower: > > Settings Setup Wizard Click Duration

Advanced Settings

- > Settings Advanced Settings

- Under the Advanced Settings menu, the following options can also be accessed:

1. Initial setting

2. Contacts

3. Personal Info

4. SOS and Support

5. Android settings

- Ringer melody and Volume

- Wiﬁ

6. Medication Reminder

7. Display & Sound settings

8. .....

Talking Dialling Digits

- While pressing the numeric buttons, M50 will announce the corresponding

number (except when in silent mode)

(To disable this feature, go to > Advanced Settings menu Display & Sound

Settings Sound Settings > ......)

SOS Assistance button

- Long press SOS button (Fig. A, 17) for 3 seconds to dial out assistance numbers

- M50 will enter handsfree mode automatically

- In parallel, an SMS with geolocation information will be sent to the recipient of this

assistance call and up to other 5 recipients. (To stop the SOS action: Long press CANCEL)

Set SOS number

Make sure the desired phone number exists in the phonebook.

- > > > > Select the Settings Advanced Settings SOS and Support SOS number

numbers...... Save

- An SMS will be sent to the selected numbers to inform them

ATTENTION:

• Remember to set the SOS number and inform the recipient

• To have SOS function working normally, the network service must be active

• Sending SMS may require additional cost!

Torch

To switch on/off the ﬂashlight, slide up or down the torch switch (Fig. A,10)

located on the left-hand side of the phone.

USING YOUR M50 IN LIGHT ANDROID MODE

When light Android mode is selected, your M50 will show a simpliﬁed smartphone

interface, with large icons and easy-to-navigate pages.

1 7

10 - Torch sliding switch

11 - Charging contacts

12 - USB connector

13 - Flashlight LED

14 - Headset jack

15 - Main camera

16 - Flash

17 - SOS button

18 - Speaker

19 - Lanyard hole

10 2

18 19

1 - Charging cradle and contacts

2 - Phone button (answer incoming call

when smartphone on the base)

3 - Volume - key

4 - Volume + key

5 - Usb connector (at the back)

Instructions Manual

M50

3 4

• Use approved handsfree equipment and appropriate holder while driving. It is

essential to observe the applicable national laws and regulations.

• Always maintain a distance of at least 15 cm to implanted heart pacemakers

to prevent interference. Do not carry the phone in a chest pocket when

switched on. Always hold the phone to the ear furthest away from the

pacemaker during calls. Switch the phone off immediately if you notice or

suspect any adverse effects. Consult your doctor if you have any question.

• This phone is hearing aid compatible. If you wear a hearing aid, please

contact your doctor or the hearing aid manufacturer to inquire about any

possible impairments through mobile communication equipment.

• Do not rely on the mobile phone as a safeguard for emergencies. For a variety

of technical reasons, it is not possible to guarantee a reliable connection under

all circumstances.

• Ensure access to the power adapter plug is not obstructed by furniture or such.

ENVIRONMENT

This symbol means that your inoperative electronic appliance must be

collected separately and not mixed with the household waste. The

European Union has implemented a speciﬁc collection and recycling

system for which producers are responsible

Help us protect the environment in which we live!

DECLARATION OF CONFORMITY

The logo printed on the products indicates the conformity with all essential

requirements ( RED directive : 2014/53/EU ). You can download the Declaration

of Conformity from our website - www.amplicomms.com

WARRANTY

Please read carefully the instructions manual included in this box. M50 is an

approved equipment in accordance with the European regulations, attested by

the CE marking. The product you just bought is a technological product, it must

be handled with care.

Note: You have a legal warranty on this product in accordance with the

regulations applicable to the sale of consumer goods in the country in which

you made this purchase.

For any information regarding this legal warranty, please contact your dealer.

Without prejudice to the legal guarantee of the products, ATLINKS guarantees

that the product in this box conforms to its technical speciﬁcations contained

in the user guide included in the this box, and this during a warranty period,

counted from the date of purchase of the new product, the date on your

invoice or ticket checkout where is indicated the name of your reseller, and

equal to: Twenty four (24) months for the telephone, excluding consumables,

accessories and batteries. For any claim under this warranty during the warranty

period, you must return the entire Product to your dealer, together with the

proof of purchase, the invoice or receipt issued by your dealer, indicating

the place of purchase and the serial number of the Product, following the

appearance or discovery of the defect. ATLINKS undertakes to repair any

defective item due to a defect in design, material or workmanship, at its

expense, or to replace, at its expense, by an identical or at least equivalent

element in terms of functionalities and performance. If the repair or

replacement is impossible under normal commercial conditions, the Product

will be refunded or replaced by a Product equivalent. Within the maximum

limit allowed by the applicable law, the product or element replacement, which

may be new or reconditioned, is warranted during a period of ninety (90) days

from the date of repair or until the end date of the initial warranty period,

whichever is the earlier greater than ninety (90) days, it being speciﬁed that any

period of immobilization of the Product of at least seven (7) days will be added

to the warranty period remaining to run. This warranty does not apply in the

following cases:

- Installation or use not in accordance with the instructions in the guide of the user,

- Incorrect connection or abnormal use of the Product, especially with non-

compatible accessories, as indicated in the user guide,

- Product opened, modiﬁed or replaced by means of non-approved parts, serial

number deleted, illegible, damaged,

- Normal wear, including normal wear and tear on accessories, batteries and displays,

- Failure to comply with the technical and safety standards in force in the area

geographical use,

- Product having suffered a shock or a fall,

- Product damaged by lightning, electrical surge, heat source or radiation,

water damage, exposure to conditions of temperature, humidity or other

excessive ambient conditions or any other cause external to the product,

- Negligence or faulty maintenance,

- An intervention, a modiﬁcation or a repair carried out by a not authorized by ATLINKS.

If the returned Product is not covered by the warranty, you will receive a quote

from repair that will mention the cost of analysis and transportation costs that

you will be charged if you want the Product returned to you. This guarantee is

valid in the country in which you regularly purchased the Product, provided that

the country is a member of the European Union. Subject to the legal provisions in

force, all warranties other than described herein are expressly excluded.

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW,

A) THIS WARRANTY IS EXCLUSIVE TO ALL OTHER WARRANTIES EXPRESS

OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE PARTICULAR;

B) ATLINKS DISCLAIMS LIABILITY FOR LOSS OR DETERIORATION OF DATA, LOSS OF

USE LOST TO WIN, LOSS OF CHANCE, DEREVENUES OR INCOME, LOSS OF OPERATION,

DAMAGES INDIRECT, CONSEQUENTIAL, CONSEQUENTIAL OR INCIDENTAL;

EXCEPT HEAVIL OR UNINTENTIONAL FAULT AND EXCEPT DAMAGE BODY.

1 - Google search

2 - Messages

3 - Chrome

4 - Apps area, swipe right/left for more pages

5 - Notiﬁcation area, drag down to see more details or open conﬁguration

Make a call

• Tap on icon on the applications menu Phone

• Click on the dial pad icon at the bottom of the screen

• Enter the phone number and then click the dial key

• Press and hold 0 key if you need to add a (+) sign for international calls preﬁx

(See Contacts section to dial phonebook entries)

• While on communication you can use the icons to activate handsfree, mute,

get the keypad to dial an extension or add another call

• To end the call, press on

Answer a call

• When a call is received, a pop up window will be shown

• Press green ANSWER button to accept or DECLINE to reject

• When the phone is on the base, you can use button to answer and end the

call in handsfree mode. You can also control the base loudspeaker volume

with and keys.

Call Logs

• To access recent calls: > tabPhone Recents

• To access full call log: > > Phone Call History

• To dial a number in the call log, click the dial icon

• To get more options, click on the number

• Long click on the number to copy or delete the record

• To clear the call logs, from Call History press the menu key > Clear

Contacts

To enter, tap on icon on the applications screen Contacts

• All contacts (SIM card, google account, phone contacts) will be displayed by

default, and in alphabetical order

• Click on Search icon to enter the contact search interface

• Click on Menu icon to access other functions (help, create labels, manage

contacts settings)

Add New Contact

• > (Or, from > , press on ) Contacts Phone Contacts Create new contact

• Choose to save the contact to your Google Account, SIM, or phone

• You may enter different contact details which include adding a picture, name,

telephone number, group, address, and email among other options

• Click Save

Delete Contact

• Long press on the contact. You can choose multiple contacts to delete. Press

• You may also search for an individual contact in the phonebook, click to select,

press menu key , and Delete

Call one of your contacts

• Enter Contacts Phone Contacts app (or app > tab)

• Browse or search your contact, click on it

• Then click again on the phone icon

Import / Export Contacts

You can import and export contacts to synchronize information between

different storage types (SIM card, Google account and your phone).

To import or export contacts:

1. Enter app Contacts

2. Press the menu icon and select , go down to Settings Import / Export

3. Select the source you want to copy the contacts from, then click next and select

the destination. Then select the desired contacts to be copied

Messages

Exchange text and multimedia messages with your family and friends. Messages

to and from the same phone number will be saved into a single conversation.

Send an SMS

• Enter Messages Start chat >

• Enter a contact name or number, or select from the list

• Compose Text Message and click send icon

Send an MMS

• Start by writing a regular SMS

• Click the attachment icon in the messaging interface

• Click to add attachments and create an MMS message

Notiﬁcations Bar

The notiﬁcation bar located on the top of the screen contains information

regarding your phone and installed apps.

The notiﬁcation settings window provides shortcuts to different phone settings

for quick access. Click on any of the shortcut notiﬁcation icons

( ) to power on or off.

Drag the notiﬁcation bar down with your ﬁnger to display any pending

notiﬁcations or actions.

To clear, drag to your right.

Power on Bluetooth

• Drag down the notiﬁcation bar and click on Bluetooth icon to enable

• Or Settings Connected devices Connection preferences Bluetooth > > >

and switch Bluetooth on. Bluetooth icon will appear in the notiﬁcation bar

• Click on “Pair new device” to see a list of available devices within the phone’s

range. You can pair with an available device by clicking on it

• > will list available devicesSettings Connected devices

Power on Wi-Fi

• Drag down the notiﬁcation bar and click on Wiﬁ icon to enable

• Or Settings Network & Internet Wi-Fi > > and select ON to power on Wi-Fi

• Click on the desired Wi-Fi network to be connected

Note: Secured networks require a password or credentials prior to connection.

Camera

Optional: You may want to insert an SD card before using the camera or video

camera for larger storage capacity.

Take Pictures

• > press the Shutter on the screen to capture imageCamera

• To view your picture, click on the Preview box button or go to > Gallery

Camera folder

• Click on Picture/Video icons to switch capture mode

• Tap on to switch between normal and selﬁe modes

• Tap on to open ﬂash mode selection interface

Gallery

Gallery is your image center. With Gallery you can view, organize, edit, and share

your pictures and videos.

Google Gallery folder > > Tap on any image. Then use the bottom menu to edit or share

to your contacts.

Settings

Settings gives access to phone conﬁguration parameters. For a comprehensive list,

check the full user guide.

Change language

• > > > Settings System Language and input Language

Change sound settings

• > Settings Sound

Use this menu to conﬁgure volume and melodies for calls, notiﬁcations, multimedia, etc.

Some of the settings include vibration, volume, ring tones, ring tones notiﬁcation,

dial touch pad, and haptic feedback and tones.

Torch

To switch on/off the ﬂashlight, slide up or down the torch switch (Figure A, 10)

located on the left-hand side of the phone.

SOS Assistance button

• Long press the SOS button (Figure A, 17) for 3 seconds to dial out assistance

numbers

• M50 will enter handsfree mode automatically

• In parallel, an SMS with geolocation information will be sent to the recipient

of this assistance call and up to other 5 recipients

(To stop the SOS action: Long press CANCEL)

Set SOS number

• Make sure the desired phone number exists in the phonebook

• From the applications screen, tap on iconSOS Numbers

• Select the numbers...... Save

An SMS will be sent to the selected numbers to inform them

ATTENTION:

• Remember to set the SOS number and inform the recipient

• To have SOS function working normally, the network service must be active

• Sending SMS may require additional cost!

Video calls with Duo

Duo is Google’s app for video calls.

To video call a contact: folder > > Click on a contact > Video call. Google Duo

SWITCHING M50 MODE

Switch from Android to Simple Smartphone mode

• From Android, click on app Select Home

• Press Simple Smartphone button

Switch from Simple Smartphone to Android mode

• From Home screen, go to Tools Exit System >

• Click on appSelect Home

• Press Android button

PAIRING M50 WITH THE BASE

Android mode:

• > >Settings Connected devices Pair new device

• Place your M50 on the base charging cradle

• Tap on when it appears in the device list, then clickM50 Smart Base

on PAIR

Simple Smartphone mode:

• Tools Exit System > and then follow same steps as above

TECHNICAL DATA

Dual SIM cards SIM + 4G USIM; dual standby

HAC M4/T4

Processor MTK6739WA (1.3GHz Quad core Arm Cortex-A7)

OS Android 10Go

Memory RAM: 1GB

ROM: 16GB

Camera Rear: 5 Mpx

Front: 2Mpx

Mobile data 2G GPRS, 3G: WCDMA, 4G:FDD-LTE

Battery Li-Ion, 2700mAh / 4.35V

Talk time Up to 8h

Standby time Up to 300h

Dimensions / Weight Approx 145x70x5mm /160g

USB jack Micro USB

Headset connection 3.5 mm

Network bands (MHz) /

Maximum power (dBm):

- GSM 2G: 850/ 33, 900/ 33, 1800/30, 1900/ 30

- 3G: 1 [2100]/ 24, 8 [900]/ 24

- 4G : 1 [2100]/ 24, 3 [1800]/ 24, 7 [2600]/ 24, 20 [800]/ 24

- Bluetooth: 2400 – 2480 / 10

- WiFi IEEE802.11b/n/g 2412 – 2472 / 20

SAR Values Max. (W/Kg) 2G: Head: 0.224; Body: 0.525; Limb: 1.265

3G: Head: 0.130; Body: 0.502; Limb: 1.045

4G: Head: 0.097; Body: 0.670; Limb: 2.226

WiFi: Head: 0.190; Body: 0.058; Limb: 0.891

PROBLEMS AND SOLUTIONS

Problems Solutions

The mobile phone cannot be switched on No battery inserted; Battery is not charged.

The phone is requesting a PUK when I

switch on the phone

If you do not have the PUK for your SIM card,

please contact your service provider.

No signal quality is displayed No network connection. The mobile phone is

in a location where there is no network service,

please move to a different location or contact

your service provider

A message appears in the display for

some functions, indicating execution/

use is not possible

Some functions can only be used after the

respective service has been applied for. Contact

your service provider.

Screen frozen or no response when

pressing keys

Remove the battery for 3 minutes and try again

No connection to the mobile

telecommunication network

Contact your service provider

The “Insert SIM“ message appears in

the display

Ensure that the SIM card has been installed

correctly. Contact your service provider.

The battery cannot be charged or is

empty within a short time

Battery is defective; Place the phone correctly

in the charging unit or connect the charging

unit properly; Clean the charging contact of the

mobile phone and charging unit with a dry soft

cloth; Charge the mobile phone for 4 hours.

The mobile phone has accidentally

got wet

Switch off the phone Immediately, remove the

battery and allow the unit to dry completely

before powering it on again.

TIPS ON THE BATTERY

• Only use batteries, cables and charging unit approved by the manufacturer,

otherwise the battery could be damaged.

• Do not short circuit the battery. Always leave the battery in the phone to

avoid accidentally short circuiting the battery contacts.

• Keep the battery contacts clean and free of dirt.

• The battery can be charged/discharged hundreds of times but its service life is

limited. Replace the battery when the battery power has decreased noticeably.

NETWORK SERVICES AND COSTS

M50 is designed for use when connected to a mobile phone network. Using

network services and SMS may result in trafﬁc costs.

AREA OF USE

• Do not use the phone in prohibited areas.

• Switch the phone off without affecting nearby medical equipment (e.g. in

hospitals).

• Do not use the phone in petrol stations or near fuels and chemicals.

SAFETY

• Prevent exposure to smoke, dust, vibration, chemicals, moisture, heat and

direct sunlight.

• The phone is not waterproof, please keep it dry.

• Only use original accessories and battery. Never attempt to connect other products.

• Never attempt to connect incompatible products.

• Repairs to this device must be completed by qualiﬁed service personnel.

• Keep the phone and accessories out of the reach of children.

• The SIM card can be removed. Caution! Small children can swallow them.

• The ringing tone is issued via the loudspeaker. Take an incoming call ﬁrst and

then hold the phone to your ear. This prevents any possible hearing damage. Model : Amplicomms M50

A/W No. : 10002356 Rev.1 (EN)

Printed in China

Atlinks Europe

147 Ave Paul Doumer

92500 Rueil-Malmaison France

RCS Nanterre 508 823 747

www.amplicomms.com

The Manufacturer reserves the right to modify the speciﬁcations of its products

to make technical improvements or comply with new regulations.

AMPLICOMMS and ATLINKS are registered trademarks.

Google, Android, and Google Play are trademarks of Google LLc.

Specyfikacje produktu

Marka:	Amplicomms
Kategoria:	Przenośny
Model:	M50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Amplicomms M50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Przenośny Amplicomms

Amplicomms M50 Instrukcja

3 Lipca 2024

Amplicomms PowerTel M6750 Instrukcja

2 Lipca 2024

Amplicomms PowerTel M7500 Instrukcja

1 Lipca 2024

Amplicomms PowerTel M9000 Instrukcja

28 Czerwca 2024

Amplicomms PowerTel M6100 Instrukcja

28 Czerwca 2024

Amplicomms PowerTel M9500 Instrukcja

28 Czerwca 2024

Instrukcje Przenośny

Najnowsze instrukcje dla Przenośny

Sunstech Arrow Instrukcja

5 Października 2024

Swisstone SD 530 Instrukcja

5 Października 2024

Emporia EUPHORIA 3G Instrukcja

5 Października 2024

Emporia Telme C135 Instrukcja

5 Października 2024

Ulefone Armor 3 Instrukcja

5 Października 2024

Fysic F15 Instrukcja

28 Września 2024

Fysic F10 Instrukcja

28 Września 2024

Fysic F25 Instrukcja

28 Września 2024

Sendo S300 - Swing 620 Instrukcja

28 Września 2024

Sendo S330 Instrukcja

28 Września 2024