Instrukcja obsługi ADE Gravis-210504

ADE maszyna do cięcia Gravis-210504

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ADE Gravis-210504 (16 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
OPERATING INSTRUCTIONS
Gravity Slicer
Model GRAVIS 250
Gravis- -Rev004- - 210504 UM en
1 Gravis- -Rev004- -210504 UM en
CONTENTS
1. FOREWORD ......................................................................................................................... 2
1.1 Introduction ............................................................................................................................ 2
1.2 Use ........................................................................................................................................ 2
1.3 Residual risks ........................................................................................................................ 3
2. START- 3UP.............................................................................................................................
2.1 Installation ............................................................................................................................. 3
2.2 Wiring .................................................................................................................................... 3
2.3 Mechanical safety devices ..................................................................................................... 4
2.4 Electrical safety devices 4 .........................................................................................................
2.5 Acceptance testing ................................................................................................................ 4
2.6 Safety precautions ................................................................................................................. 4
2.7 Operation ............................................................................................................................... 5
3. USING THE MACHINE .......................................................................................................... 5
3.1 Machine Overview ................................................................................................................. 5
3.2 Operating functions ................................................................................................................ 6
3.3 Switching on .......................................................................................................................... 6
3.4 Feeding the product ............................................................................................................... 6
3.5 Adjusting the slice thickness .................................................................................................. 6
4. CLEANING AND CARE ......................................................................................................... 6
4.1 Cleaning ................................................................................................................................ 6
4.2 SHARPENING OPERATIONS............................................................................................... 7
4.3 Lubricating ............................................................................................................................. 8
4.4 Disposal ................................................................................................................................. 8
5. TRAINING ............................................................................................................................. 9
6. WARRANTY .......................................................................................................................... 9
7. TECHNICAL DATA ................................................................................................................ 9
8. CE MARKING AND DECLARATION OF CONFORMITY ..................................................... 10
9. CIRCUIT DIAGRAM ............................................................................................................ 11
10. EXPLODED VIEW ............................................................................................................... 11
11. SPARE PARTS LISTS ......................................................................................................... 13
Gravis- -Rev004- - 2 210504 UM en
1. FOREWORD
This symbol means: “Observe operating instructions.” Read these operating
instructions carefully and observe the information contained therein. Keep these
operating instructions handy for future reference.
This manual has been written to comply with the Machinery Directive as amended.
With it, the manufacturer intends to furnish the customer with clear and concise instructions for the
use and maintenance of the machine, as well as information regarding the safety devices with which
it is tted to assure maximum eciency throughout its service life.
The slicers may be updated; this eventuality shall not prejudice the instructions and explanations
contained in the manual.
Before starting up the slicer, you must read this manual carefully.
Should this manual be damaged or lost, apply for a copy from the manufacturer immediately.
Many accidents and injuries that occur when using the machine result from insucient familiarity with
its functions and safety devices. Before starting work with the machine, please read the instructions
herein carefully and follow them to the letter.
1.1 Introduction
The slicers have been designed to comply with applicable safety standards. Consequently, all our
slicers are fitted with a plate featuring the “CE” mark attesting to the product's conformity with said
provisions.
The housing, product carriage, feed plate, and sickle guard are made of anodized aluminum. The
housing design enables easy cleaning. The blade is set in motion by an electric motor with a V-belt
drive, which has a noise level of <70 dB measured at a distance of 1 meter at a height of 1.60 meters.
The total vibration of the parts coming into contact with the user's hands and arms is <2.5 m/s².
1.2 Use
These gravity slicers are intended for slicing cooked and raw sausages, hot or cold meat, bread, and
various types of cheese. The machine is not suitable for slicing some types of hard cheese. The slice
thickness is adjustable from 0 to 13 mm. When slicing cheese, we recommend using a blade with
Teon coating at cheese temperatures between 7 and 10 °C.
Never use the slicer to slice frozen products, meats, or sausage products with
bones, fruits, vegetables, or non-food products.
Any attempt to slice such products or similar foods may cause severe damage to
the machine and render the warranty null and void.
The machine is suitable for about 60 catering sta members. The above gure is merely a
recommendation based on experience and may vary depending on the application. The maximum
duty cycle is 40% (24 minutes per hour). The electric motor must then be allowed sucient time to
cool down. Operating the machine continuously for shorter periods also shortens the cooling
intervals. The machine is equipped with thermal overload protection. When the machine's electric
motor gets overheated, it switches o automatically. If this occurs, switch the machine o
immediately. Allow sucient time for the motor to cool down before switching the machine back on.
Thermal overload protection merely serves as another safety measure and should never be thought
of as a time limit for the duty cycle in the daily operation.
The machine may only be used in its original condition and with original parts. It is strictly forbidden
to dismantle the safety devices. If you notice any signs of damage to the safety devices or if any
safety devices are not in place, shut down the machine immediately and contact ADE for repair or
replacement.

Specyfikacje produktu

Marka: ADE
Kategoria: maszyna do cięcia
Model: Gravis-210504

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ADE Gravis-210504, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna do cięcia ADE

ADE

ADE AUTOMATIC-XL Instrukcja

25 Września 2024
ADE

ADE AUTOMATIC-L Instrukcja

25 Września 2024
ADE

ADE MARE350 Instrukcja

25 Września 2024
ADE

ADE Diagonal SN1 Instrukcja

15 Września 2024
ADE

ADE Prosciutto 300 Instrukcja

14 Września 2024
ADE

ADE Gloria 250-230 Instrukcja

1 Września 2024
ADE

ADE Hanse 250 Instrukcja

26 Sierpnia 2024
ADE

ADE Automatic-Z Instrukcja

19 Sierpnia 2024
ADE

ADE Prosciutto 330 Instrukcja

17 Sierpnia 2024
ADE

ADE Hanseat 300 Instrukcja

6 Sierpnia 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Genius

Genius Nicer Dicer Quick Instrukcja

11 Stycznia 2025
Eldom

Eldom Sliss KR350 Instrukcja

11 Stycznia 2025
RGV

RGV Desy AF 220 AM Instrukcja

10 Stycznia 2025
RGV

RGV Desy AF 275 F Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-3 Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-2 Instrukcja

10 Stycznia 2025
Ovela

Ovela OVSAFSLCERA Instrukcja

5 Stycznia 2025
Royal Catering

Royal Catering RCAM-250 Instrukcja

3 Stycznia 2025
Royal Catering

Royal Catering RCES-215/12 Instrukcja

31 Grudnia 2025
CaterChef

CaterChef 537150 Instrukcja

31 Grudnia 2025