Instrukcja obsługi Zylight F8-T

Zylight Ulga F8-T

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zylight F8-T (10 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/10
10718 McCune Avenue
Zylight LLC
World Headquarters:
Los Angeles, CA 90034
978-244-0011
info@zylight.com
The Fresnel.
Reimagined.
Zylight F8 LED Fresnel
User Instructions
*
F8-D*, F8-T*, F8-H, F8-U
10718 McCune Avenue
Los Angeles, CA 90034
info@zylight.com
www.zylight.com
Optional Accessories:
# 26-02012- F8 Chimera Kit
# 19-02028- F8 Egg Crate (50 deg.)
# 26-02009- F8 Gold Mount Battery Kit
# 26-02010- F8 V-Mount Battery Kit
# 26-02019- DMX Interface Box
# 19-02041- F8 Handle Kit
# 26-02014- F8 Pole Yoke Mount
# 20-06006- F8 Rear AC Adapter Bracket
# 19-02039- F8 Single Head Case
# 19-02040- F8 Dual Head Case
Customer Support: Zylight provides a customer support line, to
provide set up help and to answer any question should you encounter
problems during your set up or initial operation. You may also visit us
on the web at www.zylight.com for any comments or suggestions.
Service Hours are Monday through Friday 9:00 a.m. to 5:00 p.m.
Eastern Standard Time.
Voice: (978) 244-0011
Fax: (978) 244-0011
E-mail: support@zylight.com
Caution! There are no user serviceable parts inside this unit. Do not
attempt any repairs yourself; doing so will void your manufacturer's
warranty. In the unlikely event your unit may require service please
contact Zylight customer support.
PLEASE recycle the shipping carton whenever possible.
Page 2
F8 Fresnel Introduction
Introduction: The multiple award-winning F8 LED Fresnel from Zylight
is the next generation of Fresnel lights. By incorporating a special
blend of Quantum nanoparticles with traditional phosphor the F8
boasts a high CRI (color rendering index) and a quality of light matched
only by traditional sunlight and incandescent bulbs, while using a
fraction of the energy. The F8 LED Fresnel is part of Zylight’s pursuit of
high quality, affordable, intelligent xtures. The unit can be controlled
manually, wirelessly or via DMX controller.
Every F8 LED Fresnel has been thoroughly tested and has been
shipped in optimal operating condition. Carefully check the shipping
carton for damage that may have occurred during shipping. If the
carton appears to be damaged, carefully inspect your xture for any
damage and be sure all accessories necessary to operate the unit have
arrived intact. If damage has been found or parts are missing, please
contact our customer support number for further instructions. Do not
return this unit to your dealer without rst contacting customer
support.
Your F8 includes the following items:
• One - Zylight F8 LED light head
• One – F8 4-way barn door
• One - Yoke bar with 5/8” baby pin adapter
• One - Yoke adjustment knob
• One – Slotted thumbscrew
• Two - 1/4" x .69" OD nylon washers (g 1)
• Three - 1/2" x .75" OD nylon washers (g 2)
• One - Serrated #10/M5 x .36" OD, .02" Stainless Washer (g 3)
• One - Worldwide AC Adapter
• One - AC Adapter hanging pouch (for light stand use)
• One - Barn Door Safety cable
• One – F8 User Guide
Page 1
g 2 g 3g 1
Safety Precautions Cont.
• To reduce the risk of electrical shock or re, do not
submerge this xture in water.
• Do not spill large amounts of water or other liquids into or on
to your xture.
• Do not attempt to operate this unit if the power cord has been
frayed or broken. Do not attempt to remove or break off the
ground prong from the electrical cord. This prong is used to reduce
the risk of electrical shock and re in case of an internal short.
• Disconnect from main power before making any type of
connection.
• Do not remove the lens under any conditions. There are no user
serviceable parts inside.
• Never operate this xture if the Fresnel lens is removed.
• Never plug this unit in to a dimmer pack.
• Always be sure to mount this xture in an area that will allow proper
ventilation. Allow at least 6" (15cm) between this device and a wall.
• Do not attempt to operate this xture if it becomes damaged.
• During long periods of non-use, disconnect the xture's main
power.
• Always mount this xture in safe and stable matter. Always use a
safety cable as part of a secure installation. This includes securing
the barn doors with a safety cable.
• Power-supply cords should be routed so that they are not likely to
be walked on or pinched by items placed upon or against them,
paying particular attention to the point they exit from the xture.
• Cleaning: The xture should be cleaned only as recommended by
the manufacturer. See page 10 for cleaning details.
• Heat: The instrument should be situated away from heat sources
such as radiators, heat registers, stoves, or other appliances
(including ampliers) that produce heat.
• The xture should be serviced by qualied service personnel when:
A. The power-supply cord or the plug has been damaged.
B. Objects have fallen, or liquid has been spilled into the
instrument.
C. The instrument has been submerged in water
D. The instrument does not appear to operate normally or exhibits
a marked change in performance.
Page 4
F8 Fresnel General Instructions
To optimize the performance of this product, please read these
operating instructions carefully to familiarize yourself with the basic
operations of this unit. These instructions contain important safety
information regarding the use and maintenance of this unit. Please
keep this manual with the unit, for future reference.
Warranty Registration
The F8 Fresnel carries a two year limited warranty. Please go to
www.zylight.com/product-registration and register your product and
validate your purchase. All returned service items whether under
warranty or not, must be freight pre-paid and accompany a return
merchandise authorization (R.M.A.) number. The R.M.A. number must
be clearly written on the outside of the return package. A brief
description of the problem as well as the R.M.A. number must also be
written down on a piece of paper included in the shipping carton. If the
unit is under warranty, you must provide a copy of your proof of
purchase invoice. You may obtain an R.M.A. number by contacting our
customer support team through our customer support number. All
packages returned to the service department not displaying a R.M.A.
number on the outside of the package will be returned to the shipper.
Safety Precautions
IP Rating:
The F8 is rated IP54 for weather resistance: Ingress of dust is not
entirely prevented, but it will not interfere with satisfactory operation.
Splashing water or light rain or snow will also have no harmful effect.
While the F8 is protected against light moisture and dust exposure,
please protect the instrument when shooting in extreme conditions and
note that the instrument is not rated to be submerged in water, or
exposed to prolonged periods of moisture. Always use your best
judgment and protect the instrument from sustained moisture
exposure.
Page 3

Specyfikacje produktu

Marka: Zylight
Kategoria: Ulga
Model: F8-T

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zylight F8-T, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga Zylight

Zylight

Zylight F8-T Instrukcja

5 Października 2024
Zylight

Zylight F8-200 Instrukcja

5 Października 2024
Zylight

Zylight F8-D Instrukcja

5 Października 2024
Zylight

Zylight IS3 Instrukcja

5 Października 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Goobay

Goobay 30780 Instrukcja

15 Października 2024
QTX

QTX DM-X12 Instrukcja

15 Października 2024
Livarno

Livarno IAN 94799 Instrukcja

15 Października 2024
Astro

Astro Denia Instrukcja

13 Października 2024
AFX

AFX Grace GRCP07CBBK Instrukcja

12 Października 2024
AFX

AFX Point PNTP0107L30D1BK Instrukcja

12 Października 2024
Neewer

Neewer TL97C Instrukcja

9 Października 2024
Neewer

Neewer SRP18C Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 005.824.56 Instrukcja

9 Października 2024
Ikea

Ikea STRÅLA 705.829.38 Instrukcja

9 Października 2024