Instrukcja obsługi Zvox Z-Base 555

Zvox głośnik Z-Base 555

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Zvox Z-Base 555 (2 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
3B. Front Panel Controls and Input.
1 MUTE/Power button. Press this button briefly to turn on the system. When the system
is on, you can press the button briefly to mute the sound. The display shows -00- when
muted. Press briefly again to restore sound.
• The Z-Base 555 does not need to be turned “on” or “off”. It will enter a low-power
STANDBY state after about 5 minutes of silence. You restore the Z-Base 555 to normal
operation whenever you press the Power, Volume Up/Down or Mute buttons on your
remote (after you have programmed the 555 to work with your remote – see separate
sheet “Your Current TV Remote Can Control Your ZVOX System.”)
• You can manually put the Z-Base 555 in STANDBY mode, also. Press and hold the
Front Panel MUTE button for about four seconds.
2 VOLUME -/+. The volume range indication is 01 to 30.
3 INPUT. Press this button to select between the available audio inputs.
4 AUDIO CONNECTING JACK. This 3.5 mm stereo minijack can be used to connect an
iPod®, MP3 player, portable CD player or any other audio device. Use a “miniplug to
miniplug” cable to connect your device to the front panel input, then switch to Input 3
using the remote control or the Input button on the front panel.
3C. Other Rear Panel Connectors.
5 Sub Out. This phono jack output supplies a full-
frequency range monaural analog audio signal for use
with an external powered subwoofer. When used with an
external powered subwoofer, set the Z-Base 555 BASS
control to “0”. Set the external powered subwoofer Low
Pass control to 55-60 Hz. Then adjust the output of the
external subwoofer to achieve a pleasing balance with
the Z-Base 555.
6 Remote Control Input. This jack is reserved for ZVOX
service use.
ZVOX Z-Base 555
Setup & Operation
Don’t Worry It’s Pretty Easy.
Great Sound Made Simple
Home Theater Made Simple!
What’s In The Box
ZVOX Sound System • Remote contro • Owner’s guide
AC cord • Analog signal cable (RCA plugs to RCA plugs)
1Place The System
On Furniture
STEP
1 2 3
5
4
6
2
STEP Plug In One
Connecting Wire
3Plug It Into The Wall
STEP
4
STEP Learn To Use
The Remote.
®
MUTE VOLUME INPUT
After making the signal connection, connect the AC
power cord to the back of the speaker. Then connect
the AC power cord to an AC power receptacle. Turn
on the speaker using the power switch on the back
panel next to the AC cord.
The Z-Base 555 has additional inputs that can be
selected from the front panel or the included remote
control. These inputs allow connection of an iPod,
MP3 player, CD player, radio or streaming audio
system or other audio device.
If your home TV system does not conform to the descriptions in this Guide, don’t hesitate to
send an inquiry to info@zvoxaudio.com. A ZVOX Audio representative will respond with useful
options.
3. Features and Controls of the Z-Base 555
You can “teach” the Z-Base 555 to respond to your current TV
remote control for functions like on/off, volume up/down and mute
(see separate sheet to learn how to do this). So for most TV viewing,
you won’t need the ZVOX remote control. The ZVOX remote control
provides adjustments of special audio features and functions:
Input
The 555 will automatically select whichever audio input was last used.
Use the INPUT button to select a different input:
• Digital Input 1 - optical if present
• Digital Input 2 (coaxial), if present
• Analog Input 1
• Analog Input 2
• Analog Input 3 (front panel minijack)
If the AC power is lost, it may be necessary to reselect the desired input.
Volume and Mute
When the Mute function is activated, the display will show -00-.
These controls will adjust the ZVOX Audio volume and Mute even if
you set up the ZVOX Speaker to respond to a different remote control.
Bass and Treble
The Bass control has a range from -8 to 4. The Treble control has a
range from -4 to 4.
Note: The bass output of the Z-Base 555 is
affected by its position within a room. You
may find it sounds best with slightly more
or less bass than the neutral setting.
Surround Settings
There are three SURROUND levels:
• Surround One (“Sd1”) has low virtual surround effect and strong
vocals. Use this setting if vocal clarity is very important to you.
• Surround Two (“Sd2”) has moderate virtual surround effect and
moderate vocals. Most people prefer this setting for most program
material.
• Surround Three (“Sd3”) has strong virtual surround effect and
moderate vocals. Many people prefer this setting when watching movies.
Output Leveling
Press this button to prevent large changes in volume. When engaged,
it boosts quiet dialog and lowers the output of loud commercial breaks.
It also reduces volume swings between cable or satellite channels. This
feature can be used along with any of the three Surround settings.
Dialog Emphasis
Press this button to engage a feature that increases the
clarity of most voices.
Pressing Dialog Emphasis overrides the current
Surround and Output Leveling setting.
A second press of Dialog Emphasis returns the ZVOX Audio
555 to the last-used Surround and Output Leveling settings.
Simple Setup – Just Four Steps
1. Place the Z-Base 555 system.
2. Connect the Z-Base 555 to your TV and/or audio devices.
3. Learn the features and controls of the Z-Base 555.
4. “Teach” the Z-Base 555 to respond to your preferred remote.
1. Speaker placement.
You can place the Z-Base 555 on any flat, stable surface near your TV – but most people
place the ZVOX system on a piece of furniture, and then place their TV on top of the
ZVOX system.
• A safe installation is the ZVOX Audio system owner’s responsibility.
• A TV heavier than 120 lbs should not be placed directly on top of the Z-Base 555. Please
confirm the pedestal base of the TV rests securely on top of the Z-Base 555. No portion of
the TV base should extend beyond the edges of the top of the speaker.
• A flat panel TV has a high center of gravity. Please confirm the furnishings supporting your
TV and the ZVOX Audio speaker are stable and secure. The surface supporting the ZVOX
Audio speaker/TV combination should not move in any direction.
• Most TV manufacturers recommend that a flat panel TV be anchored to a secure vertical
surface with a tether. This prevents a household accident from causing a TV to fall
off its supporting surface. ZVOX Audio recommends you heed this and all installation
recommendations made by the TV manufacturer.
2. Connecting Your TV To The ZVOX System
A. Connect your cable box, DVD player, etc. to your TV the way you normally do. You
probably have a cable box or satellite receiver, and
a DVD or Bluray player connected to your TV. You
may also have a game console or VCR connected.
Leave all these sources connected to your TV’s
inputs – you don’t need to change them. You should
not need to connect the audio output of any video
source directly to a ZVOX Audio speaker.
B. Connect the audio output of your TV to the input of
the ZVOX system. Different TVs have different audio
output options. Check the back panel of your TV for
one of the following:
• Optical digital audio output
(small square port, often with a central cover flap)
• Coaxial digital audio output
(single RCA-style connecting jack).
• Analog audio output
(dual RCA-style connecting jacks - red and white)
– OR a single 3.5mm “mini jack.”
• Some smaller TVs don’t have any of the above
connections, but do have a headphone jack
(3.5mm mini jack).
If your TV has an optical digital output jack, use an optical
digital (toslink)
connecting cord
to connect to the
Optical digital input
on the back of the
ZVOX system.
If your TV has a coaxial digital output jack, any
phono plug to phono plug connecting cable can
connect this jack to the coaxial digital input jack
on the Z-Base 550.
Typical TV Back-Panel Connectors
Bass set at -2 Treble set at 1
ZVOX Back Panel Connectors
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
15. Grounding or Polarization–This product may be
equipped with a polarized alternating-current line
plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the
plug fully into the outlet, try reversing the plug. If the
plug should still fail to fit, contact your electrician to
replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
Alternate Warnings–This product is equipped with
a three-wire grounding-type plug, a plug having a
third (grounding) pin. This plug will only fit into a
grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet,
contact your electrician to replace your obsolete
outlet. Do not defeat the safety purpose of the
grounding-type plug.
16. Ventilation–Slots and openings in the cabinet
are provided for ventilation and to ensure reliable
operation of the product and to protect it from
overheating, and these openings must not be
blocked or covered. The openings should never be
blocked by placing the product on a bed, sofa, rug,
or other similar surface. This product should not be
placed in a built-in installation such as a bookcase
or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
17. The MAINS plug or an appliance coupler is used as the
disconnect device, the disconnect device shall remain
readily operable.
18. CLASS II apparatus with double insulation, and no
protective earth provided.
Stable Placement. Do not place the Z-Base
555 on an unstable cart, stand, bracket or
table. The Z-Base 555 may fall, causing
serious injury to a child or adult and serious
damage to the product. Do not use the
Z-Base 555 on any unstable surface.
Placement of a TV on the Z-Base 555. Televisions
weighing less than 120 pounds, and with base dimensions
of less than 27" in width and less than 13.5" in depth, can
be placed on top of the Z-BASE 555—BUT ONLY WHEN
THE FOLLOWING SAFETY PRECAUTIONS ARE STRICTLY
OBSERVED. PLACING A TV ON TOP OF THE ZVOX Z-BASE
555 WITHOUT FOLLOWING ALL THE PRECAUTIONS IS
DANGEROUS AND SHOULD NOT BE DONE.
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized
or grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13. Unplug this apparatus during lightning storms or
when unused for long periods of time.
14. Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
Important Safety Instructions
Special Safety Warnings Regarding Placement of
Z-Base 555 and Other Equipment
READ THIS FIRST
Important Safety Instructions For ZVOX Z-Base 555 System
WARNING
• TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
• THIS APPLIANCE SHALL NOT BE EXPOSED TO DRIPPING OR SPLASHING WATER AND NO OBJECT
FILLED WITH LIQUIDS SUCH AS VASES SHALL BE PLACED ON APPARATUS.
CAUTION
RISK OF ELECTRICAL SHOCK,
DO NOT OPEN
This lightning flash with
arrowhead symbol, within an
equilateral triangle, is intended to
alert the user to the presence of
uninsulated “dangerous voltage”
within the product’s enclosure
that may be of sufficient
magnitude to constitute a risk
of electrical shock to persons.
The exclamation point within an
equilateral triangle is intended to
alert the user to the presence
of important operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Warning: To reduce the risk of
electrical shock, do not remove
cover (or back) – no serviceable
parts inside. Refer servicing to
qualified service personnel.
• The television must weigh 120 pounds or less.
• The base of the TV, or the TV stand, must be 27" wide
or less.
• The base of the TV, or the TV stand, must be 13.5"
deep or less.
• The TV MUST be anchored to the rear wall using
anchor bolts and supporting cables supplied by the
TV manufacturer, following the installation guidelines
provided by the TV manufacturer.
• Be sure to take measures to prevent the Z-Base 555
from becoming uneven or unstable. Install the
Z-Base 555 on a solid and flat surface.
Optical connecting cord
MUTE VOLUME INPUT
MUTE VOLUME INPUT
MUTE VOLUME INPUT
MUTE VOLUME INPUT
MUTE VOLUME INPUT
MUTE VOLUME INPUT

Specyfikacje produktu

Marka: Zvox
Kategoria: głośnik
Model: Z-Base 555

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Zvox Z-Base 555, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Zvox

Zvox

Zvox SB400 Soundbar Instrukcja

26 Września 2024
Zvox

Zvox AccuVoice AV200 Instrukcja

26 Września 2024
Zvox

Zvox SoundBase 440 Instrukcja

26 Września 2024
Zvox

Zvox ACCUVOICE AV203 Instrukcja

26 Września 2024
Zvox

Zvox SB380 SoundBar Instrukcja

26 Września 2024
Zvox

Zvox Z-Base 555 Instrukcja

26 Września 2024
Zvox

Zvox AccuVoice AV155 Instrukcja

25 Września 2024
Zvox

Zvox SB500 Soundbar Instrukcja

25 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024