Instrukcja obsługi ZLine KB2IEBBXB30

ZLine Okap wyciągowy KB2IEBBXB30

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla ZLine KB2IEBBXB30 (4 stron) w kategorii Okap wyciągowy. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/4
Designer Island Hood Installation
1
1Locate the center above the stove where the hood is to be installed. There are 2 brackets,
the Crown Molding Bracket and the Chimney Mounting Bracket. Install the Crown
Molding Bracket directly on the ceiling with the curved sides facing towards the
ground (the crown will slide on at the end). Install the Chimney Mounting Bracket
underneath the Crown Mounting Bracket. Ensure that the bracket will be secured to s
solid wood backing . Attach so it can hold the load bracket to the ceiling. s
*The recommended height to install your hood is 30˝ minimum and 36 "maximum
above the cooktop.
*For Outdoor (Copper and 304 Series) hood installation, the unit must be installed
at a minimum of 36˝ above the grill.
Designer Island Hood Installation
2How to measure your chimney: Make note above stove top where the base of the hood
will be after installed (30-36in above stove). From this point, measure to the point
where the Chimney Mountain Bracket rests (this bracket ends 2.5in from the ceiling,
the chimney will terminate here, not flush with the ceiling). If you measure to the
ceiling, subtract 2.5 inches for correct chimney height. Once you have the total height,
subtract the height of the base of the hood to where the chimney begins and you will
have the correct height of the chimney. Cut the chimney to fit.
*Make sure to include 2.5 inches of space above the chimney to the ceiling (the crown
molding will cover this).
2
3 Attach the transition piece, rubber gasket and ducting
to top of the hood.
5 Install the duct work in the center of
the ceiling bracket.
4Attach the angle iron pieces to the hood.
Measure your cut chimney, add 2.5in and
attach the second angle iron to correct height
for mounting.
3

Specyfikacje produktu

Marka: ZLine
Kategoria: Okap wyciągowy
Model: KB2IEBBXB30

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z ZLine KB2IEBBXB30, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Okap wyciągowy ZLine

ZLine

ZLine 698RD28 Instrukcja

30 Września 2024
ZLine

ZLine KB2IEBBXB30 Instrukcja

30 Września 2024
ZLine

ZLine 68642 Instrukcja

30 Września 2024
ZLine

ZLine KECRN30 Instrukcja

30 Września 2024
ZLine

ZLine RK62330 Instrukcja

30 Września 2024
ZLine

ZLine KZCRN30 Instrukcja

30 Września 2024
ZLine

ZLine KBAR30 Instrukcja

30 Września 2024

Instrukcje Okap wyciągowy

Najnowsze instrukcje dla Okap wyciągowy

Pelgrim

Pelgrim ISW990 Instrukcja

15 Października 2024
PKM

PKM 6080X Instrukcja

15 Października 2024
M-System

M-System MSPK 761 IX Instrukcja

15 Października 2024
Pelgrim

Pelgrim ISWA991RVS Instrukcja

15 Października 2024
Pelgrim

Pelgrim ISW751RVS Instrukcja

15 Października 2024
Pelgrim

Pelgrim ISW771RVS Instrukcja

15 Października 2024
Amana

Amana WVW53UC6HV Instrukcja

15 Października 2024
Haier

Haier HPH60IMB2 Instrukcja

15 Października 2024
Haier

Haier HC60BMB2 Instrukcja

15 Października 2024
Haier

Haier HPH90IMB2 Instrukcja

15 Października 2024