Instrukcja obsługi WyreStorm EX-1UTP-IR-50

WyreStorm przedłużacz AV EX-1UTP-IR-50

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WyreStorm EX-1UTP-IR-50 (16 stron) w kategorii przedłużacz AV. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 1

Instruction Manual

Thank you for choosing this WyreStorm product.

Please read these instructions carefully before installing to avoid complications later.

EX-1UTP-IR-50-POH

50M/164FT HDMI Extension Over HDBaseT incl.

Remote Power, full 3D & Bidirectional IR

EX-1UTP-IR-50

50m/164ft HDMI Extension over HDBaseT incl.

full 3D & Bidirectional IR

Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343

Contents

CONTENTS, INTRODUCTION, FEATURES, AND FEATURES

• HDBaseT extenders capable of 1080p HD @60Hz and

HD multichannel audio transmissions up to 50m/164ft

under perfect conditions*

• Discrete two-way IR control signal together with HDMI

signal over a single Cat5e/6/7 cable

• Power-over-HDBaseT (PoH) - 12v Mains connected

Transmitters pass unidirectional power along the Cat5e/6

to remotely power display receivers - no additional power

required at display locations. (EX-1UTP-IR-50-POH only)

• Fully supports 3D applications - frame packing/

sequential (Blu-ray) and Interlaced Stereoscopic (satellite/

cable) broadcasts

• Supports 36bit Deep Colour

• HDMI V1.4

• Cable termination follows IEEE-568B standards

• HDCP compliant

• Automatically adjusts feedback, equalisation and

amplication of signal for easy installation.

• LED indication for visual power and HDMI / HDBaseT

video signal status.

* Perfect transmission conditions denote straight cable

runs with no electrical interference, bends, kinks, patch

panels or wall outlets.

1. Introduction

The WyreStorm EX-1UTP-IR-50 and EX-1UTP-IR-

50-POH extender models feature Class B HDBaseT

technology for an even more aordable HDBaseT

extender solution over shorter distances up to

50m/164ft.

Designed for smaller projects that may not require the

feature set of full HDBaseT yet still benet from the

signal stability and functions oered by this powerful

technology, including distribution of full 1080p HD

video, HD audio and bidirectional IR, with the PoH

model including remote power passed through a single

Cat5e/6 cable from the transmitter to power the display

receiver.

The EX-1UTP-IR-50 and POH Extender models

comprise of a transmitter and receiver to distribute

full, uncompressed HD 1080p video @60Hz, HD

multichannel audio with bidirectional discrete IR control

of source and display from either location over distances

of up to 50m/164ft using a single shielded or unshielded

Cat5e/6 cable.

The EX-1UTP-IR-50-POH features Power-over-HDBaseT

technology, that enables the transmitter to draw 12v

power from a mains supply and pass the current along

the length of a single Cat5e/6 cable along with the video,

audio and control signals to power the receiver - no

power access is necessary at the display location for

ease of installation and connection; meaning no additional

power adaptors required and improved energy eciency.

Transmitters of both models include EDID management

to manually handle device communication via DIP

switch setting, with Receivers containing cable distance

setting mode to encourage successful transmission if

the distance of the cable run is an issue. Transmitters

and receivers of both models also feature protection

against ESD (electrostatic discharge) to further stabilise

transmission with LED indication on the unit housing

providing clear conrmation of power and signal link

status.

Both models are fully cascadable with distribution

increased by connecting multiple extenders for greater

exibility, whatever the application.

2. Features

Introduction

Features

Safety Precautions

Packaging Contents

Specication

Typical Application

Troubleshooting

FAQ’s

EDID & Distance Setting

Maintenance

Product Service

Panel Description

i. EX-1UTP-IR-50 Transmitter & Receiver

ii. EX-1UTP-IR-50 - POH Transmitter & Receiver

Connection & Operation

Mail In Service

Warranty

Warranty Limits and Exclusions

Installation Notes

Technical Support: support@wyrestorm.com US: +1 866 677 0053 EU: +44 (0) 1793 230 343 3

SAFETY PRECAUTIONS, PACKAGE CONTENTS AND SPECIFICATION

3. Safety Precautions

• 1 x WyreStorm EX-1UTP-IR-50 / EX-1UTP-IR-50-

POH Transmitter

• 1 x WyreStorm EX-1UTP-IR-50 / EX-1UTP-IR-50-

POH Receiver

• 1 x Printed product manual and quick start guide (also

downloadable from this product main page)

• 2 x pairs of mounting brackets for transmitter/receiver

• 2 x 5VDC power supply (EX-1UTP-IR-50) / 1 x 12VDC

power supply (EX-1UTP-IR-50-POH)

• 1 x IR TX for IR control of to Source device from

display zone

• x IR RX to receive IR control signals in Display zone

to Source. (IR frequency range: 940nm IR Frequency:

38KHZ)

5. Unplug apparatus from power supply during

lightening storms or when unused for long periods

of time.

6. Protect the power cable from being walked on,

pinched or restricted in any way, especially at plug

connections.

7. Only use attachments/accessories specied by the

manufacturer.

8. Units contain non-servicable parts - Refer all

servicing to qualied service personnel.

4. Package Contents

5. Specication

1. Do not expose this apparatus to rain, moisture,

sprays, drips or splashes and ensure that no

objects containing liquids are placed on the

apparatus, including cups, glasses and vases.

2. Do not place this unit in a conned space such as

enclosed shelving, cabinets or bookshelves.

Ensure the unit is adequately ventilated.

3. To prevent the risk of electric shock or re hazard

due to overheating, do not cover the unit or

obstruct ventilation openings with material,

newspaper, cardboard or anything that may restrict

airow into the unit.

4. Do not install near external heat sources such as

radiators, heat registers, boilers or any device that

produces heat such as ampliers or computers and

do not place near sources of naked ame.

Dimensions (WxHxD): 120mm/4.72” x 24mm/0.94” x 101mm/3.97”

Weight 0.36kg / 0.79lb (Each)

Operang Temperature Range: -5 to +35°C (-41 to +95 °F)

Operang Humidity Range: 5 to 90 % RH (no condensaon)

Video Amplier Bandwidth: 6.75Gbps

Input Video Signal: 0.5-1.0 volts p-p

Input DDC Signal: EX-1UTP-IR-50 5 volts p-p TTL (Transmier), 5 volts p-p TTL (Receiver)

EX-1UTP-IR-50-POH 12 volts p-p TTL (Transmier), 5 volts p-p TTL (Receiver)

Maximum Single Link Range: 1080p 36bit colour depth

HDMI Transmission distance: 1080p signal up to 15m/ 49 HDMI

Video Format Supported: VESA: 640x480, 800x600, 1024x768, 1280x1024, 1600x1200,

1920x1080, 1920x1200 DTV/HDTV: 480i/576i/480p/576p/720p/

1080i/1080p

Output Video: HDMI 1.4+HDCP (Sync mirrors source), including 3D - frame packing/

sequenal (Blu-Ray) and Stereoscopic (Satellite/Cable broadcasts)

Maximum Cat5e/6 transmission 1080p signal up to 50m / 164 (Under perfect transmission condions including

distance: straight cable runs with no electrical interference, bends, kinks, patch panels or wall outlets.)

Power Consumpon: EX-1UTP-IR-50 2.5 Was (Transmier) 5 Was (Receiver)

EX-1UTP-IR-50-POH 15 Was (Transmier) 5 Was (Receiver) -

power drawn from Transmier or mains

BTU Rang (Brish Thermal Unit): EX-1UTP-IR-50 EX-1UTP-IR-50-POH 25.59 51.02

WARNING

To reduce the risk of re, electric shock

or product damage:

onal

ngs if

extender sets.

Specyfikacje produktu

Marka:	WyreStorm
Kategoria:	przedłużacz AV
Model:	EX-1UTP-IR-50
Kolor produktu:	Szary
Waga produktu:	360 g
Gniazdko wyjścia DC:	Tak
Zakres temperatur (eksploatacja):	-5 - 35 °C
Zakres wilgotności względnej:	5 - 90 %
Skrócona instrukcja obsługi:	Tak
Kanały wyjścia audio:	7.1 kan.
Diody LED:	Tak
Model:	Nadajnik i odbiornik AV
Wymiary produktu (SxGxW):	120 x 101 x 24 mm
Maks. rozdzielczość:	1920 x 1200 px
Wersja HDMI:	1.4
HDCP:	Tak
Szerokość pasma:	6.75 Gbit/s
System dźwięku:	Wielokanałowy
Maksymalny dystans transferu:	50 m
Obsługiwane rozdzielczości grafiki:	640 x 480 (VGA), 800 x 600 (SVGA), 1024 x 768 (XGA), 1280 x 1024 (SXGA), 1600 x 1200 (UXGA), 1920 x 1080 (HD 1080)
HDMI in:	1
Zdalne wejście IR:	2
Obsługiwane tryby wideo:	480i, 480p, 576i, 576p, 720p, 1080i, 1080p
Uchwyty mocowania dołączone:	Tak
Zdanlne wyjścia IR:	2
Obsługiwane typy kabli:	Cat5, Cat5e, Cat6
Wejścia RJ-45:	1
Wyjścia RJ-45:	1
Zużycie prądu (nadajnik) (max):	2.5 W
Zużycie prądu (odbiornik) (max):	5 W
Nadajnik podczerwieni w zestawie:	Tak
Odbiornik podczerwieni w zestawie:	Tak