Instrukcja obsługi WilTec AS196AW
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WilTec AS196AW (9 stron) w kategorii kompresor. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
Operation Manual
Airbrush Compressor AS196AW
34246
Illustration similar, may vary depending on model
Read and follow the operating instructions and safety information before using for the first time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps, and technical data can differ insignificantly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities, please contact us.
https://www.XPOtool.com Item 342 Page 2 46
The Tool Experts
04 2022-1
The information contained in this document may alter at any time without previous notice. It is prohibited
to copy or spread any parts of this document in any way without prior written allowance. All rights re-
served.
The WilTec Wildanger Technik GmbH cannot be held accountable for any possible mistakes in this
operating manual, nor in the diagrams and figures shown.
Even though, the WilTec Wildanger Technik GmbH has undergone biggest possible efforts to ensure
that the operating manual is complete, faultless, and up to date, mistakes cannot be entirely avoided.
If you should find a mistake or wish to make a suggestion for improvement, we look forward to hearing
from you.
Send an e-mail to:
service@wiltec.info
or use our contact form:
https://www.wiltec.de/contacts/
The most recent version of this manual in various languages can be found in our online shop via:
https://www.wiltec.de/docsearch
Our postal address is:
WilTec Wildanger Technik GmbH
Königsbenden 12
52249 Eschweiler
Germany
To return orders for exchange, repair, or other purposes, please use the following address. Attention!
To allow for a smooth execution of your complaint or return, it is important to contact our customer
service team before returning the goods.
Returns Department
WilTec Wildanger Technik GmbH
Königsbenden 28
52249 Eschweiler
E-mail: service@wiltec.info
Tel: +49 2403 55592–0
Fax: +49 2403 55592–15
https://www.XPOtool.com Item 342 Page 3 46
The Tool Experts
04 2022-1
Introduction
Thank you for purchasing this quality product. To minimise the risk of injury we urge that our clients
take some basic safety precautions when using this device. Please read the operation instruc-
tions carefully and make sure you have understood its content.
Keep these operation instructions safe.
Safety precautions
BEWARE:
The use of this device is allowed only with fault current protection switch with a triggering nominal current
up to (according to VDE 0100 Article 702 and 738).30 mA
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory, and mental abilities, or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or the follow the instructions, made by this person on how to use
the device correctly. Children should be supervised to make sure that they do not play with the device.
CAUTION:
•
•
•
•• The compressor head (with cooling fins) can get very hot.
•
•
•
•• Run a visual inspection of the device before every use. Do not use the device if the safety
appliances are damaged or worn out. Never override safety regulations.
•
•
•
•• Use the device exclusively according to the intended purpose stated in the manual.
•
•
•
•• You are responsible for the safety of the working environment.
•
•
•
•• If the cable or the plug is damaged due to external influences, the cable must not be repaired,
but must be replaced with a new one. This work can only be carried out by an electrician.
•
•
•
•• The 230 V alternating voltage indicated on the type plate of the device must correspond to the
existent mains voltage.
•
•
•
•• Never lift, carry, or fix the device by using the power cable.
•
•
•
•• Make sure that the electrical plug connection is protected from flood and moisture.
•
•
•
•• Disconnect the mains plug before starting the maintenance work at the compressor.
•
•
•
•• The user is responsible for complying with the location specific safety and mounting regulations.
Ask an electrician, if necessary.
•
•
•
•• In case of device failure, the repairs can only be carried out by an electrician.
NOTES:
•
•
•
•• The user should choose the right compressor with the appropriate air volume and air pressure
to correspond to the actual work requirements.
•
•
•
•• Never expose the device to dust, acid, steam, explosive or flammable gases, or atmospheric
influences (rain, sun, fog, snow).
•
•
•
•• The vacuum pump can be operated only in an appropriate environment (good ventilation, am-
bient temperature of +5–+40 ℃).
•
•
•
•• Never use the compressor barefoot or with wet hands or feet.
•
•
•
•• Never allow children to touch the switched-on compressor or to insert the plug. It may cause
burns or electric shocks.
•
•
•
•• Do not open or damage any compressor part. If necessary, please contact your seller.
•
•
•
•• Always release the water by opening the drain valve before not using the compressor for a long
time. Store the compressor in a well-ventilated place.
•
•
•
•• Always wear goggles. Under no circumstances direct the airflow towards your body or other
persons’ bodies or animals.
•
•
•
•• Never use the device in areas with steam or moisture or close to water.
•
•
•
•• Switch off the compressor if you do not use it. Disconnect it from mains before you repair, re-
condition, maintain, clean, or replace parts. Never use the power cable as handle. Keep the
Specyfikacje produktu
Marka: | WilTec |
Kategoria: | kompresor |
Model: | AS196AW |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z WilTec AS196AW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje kompresor WilTec
31 Maja 2024
31 Maja 2024
31 Maja 2024
31 Maja 2024
31 Maja 2024
31 Maja 2024
31 Maja 2024
31 Maja 2024
31 Maja 2024
Instrukcje kompresor
- kompresor Livoo
- kompresor Ultimate Speed
- kompresor Yato
- kompresor Parkside
- kompresor Global
- kompresor Toolcraft
- kompresor Festool
- kompresor Stanley
- kompresor Boss
- kompresor Scheppach
- kompresor DeWalt
- kompresor Einhell
- kompresor Hyundai
- kompresor Silverline
- kompresor Makita
- kompresor Carel
- kompresor Ozito
- kompresor Draper
- kompresor DEDRA
- kompresor Biltema
- kompresor CMI
- kompresor Osram
- kompresor Trotec
- kompresor Meec Tools
- kompresor Güde
- kompresor Bavaria
- kompresor Zipper
- kompresor PreSonus
- kompresor Airpress
- kompresor DURO PRO
- kompresor Unimac
- kompresor Westfalia
- kompresor Eventide
- kompresor Lindell Audio
- kompresor Aerotec
- kompresor Ferm
- kompresor Nilfisk
- kompresor Hitachi
- kompresor Herkules
- kompresor Craftsman
- kompresor Fieldmann
- kompresor PowerPlus
- kompresor Vonroc
- kompresor HiKOKI
- kompresor Workzone
- kompresor Proviel
- kompresor OKAY
- kompresor Porter-Cable
- kompresor Metabo
- kompresor SPL
- kompresor Cocraft
- kompresor Proline
- kompresor Pansam
- kompresor Auto Joe
- kompresor Sun Joe
- kompresor Tacklife
- kompresor Senco
- kompresor Steren
- kompresor Power Craft
- kompresor Laica
- kompresor Topcraft
- kompresor Outbac
- kompresor Duro
- kompresor Truper
- kompresor Abac
- kompresor Eufab
- kompresor Holzmann
- kompresor Avantco
- kompresor Arebos
- kompresor Sthor
- kompresor POWERNAIL
- kompresor Anova
- kompresor Narvon
- kompresor Freeman
- kompresor Airman
- kompresor Merlin
- kompresor Pretul
- kompresor Pro-Lift
- kompresor Aomni
- kompresor Numax
- kompresor Full Boar
- kompresor TOOLMATE
- kompresor California Air Tools
- kompresor Ilsco
- kompresor Hulk Power
- kompresor Cartrend
- kompresor MSW
- kompresor Creemers
- kompresor Hamron
- kompresor Robust
- kompresor Alphacool
- kompresor ExelAir
- kompresor TJM
- kompresor Prowork
- kompresor TAURUS Titanium
Najnowsze instrukcje dla kompresor
15 Października 2024
15 Października 2024
13 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024