Instrukcja obsługi WilTec AF189


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla WilTec AF189 (8 stron) w kategorii kompresor. Ta instrukcja była pomocna dla 19 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
© by WilTec Wildanger Technik GmbH Seite 12
http://www.WilTec.de
http://www.aoyue.eu Version 3.2016
http://www.teichtip.de
Operation Manual
Airbrush Compressor AF189
ARTICLE 34205
Read and follow the operating instructions and safety information before using for the rst time.
Technical changes reserved!
Due to further developments, illustrations, functioning steps and technical data can dier insignicant-
ly.
Updating the documentation
If you have suggestions for improvement or have found any irregularities please contact us.
© by WilTec Wildanger Technik GmbH Seite 13
http://www.WilTec.de
http://www.aoyue.eu Version 3.2016
http://www.teichtip.de
The information contained in this document is subject to change without prior notice. No part of this
document can be copied or duplicated in another form without the prior written consent of WilTec Wil-
danger Technik GmbH. The WilTec Wildanger Technik GmbH assumes no liability for any errors in
this user manual or the connection diagram.
Although WilTec Wildanger Technik GmbH has made every eort to make sure that this user manual
is complete, accurate and updated, errors cannot always be avoided. In the event of problems with
this user manual please complete and send this form back to us.
FAX-notication (+++49 2403 55592-15),
from: ________________________________________
Name: ________________
Firm:_____________________
Tel/Fax:__________________
I would like to report the following mistakes:
___________________________________________________________________
Customer Service WilTec Wildanger Technik GmbH
e-mail: service@WilTec.info
Tel:++ +49 2403 55592-0
Introduction
Thank you for purchasing this quality product. To minimize the risk of injury by means of re or
electric shock we urge that our clients take some basic safety precautions when using this
device. Please read the operation instructions carefully and make sure you have understood its
content.
Always use a grounded power connection with the appropriate mains voltage. You can find the corre-
sponding mains voltage on the type plate. If you have any doubts about the connection being ground-
ed, have it checked by a qualied professional. Never use a faulty electric cable.
Do not inspect the electrical part of the pressure pond lter in a wet or damp environment or when you
are wet yourself and protect it from direct sunlight. Install this device in a safe location so that nobody
can step on the cable, fall over or damage it. Disconnect the power plug before cleaning it and use
only a damp cloth for cleaning. Avoid using cleaning agents and make sure that no liquid enters the
electrical part of the pump.
The electric part of the device contains no parts that can be inspected or serviced by the user. Leave
the maintenance, adjustment and repair to qualied technical personnel. In case of unauthorised inter-
vention the 2-year warranty is no longer valid! Keep these operation instructions safe.
© by WilTec Wildanger Technik GmbH Seite 14
http://www.WilTec.de
http://www.aoyue.eu Version 3.2016
http://www.teichtip.de
Safety guideline
BEWARE:
The use of this device is allowed only with fault current protection switch with a triggering nominal
current up to 30mA (according to VDE 0100 Article 702 and 738).
The device is not intended for use by persons (including children) with impaired or limited physical,
sensory and mental abilities or lack of experience and/or real knowledge, unless they are supervised
by a person responsible for their safety or the follow the instructions, made by this person on how to
use the device correctly.
Children should be supervised to make sure that they do not play with the device.
ATTENTION:
The head of the compressor (with cooling ns) can get very hot.
Run a visual inspection of the device before every use. Do not use the device if the safety ap-
pliances are damaged or worn out. Never override safety regulations.
Use the device exclusively according to the intended purpose stated in the instructions for
use.
You are responsible for the safety of the working environment.
If the cable or the plug is damaged due to external inuences the cable must not be repaired!
It has to be replaced with a new one. This work can be carried out only by an electrician.
The voltage indicated on the type plate of the device of 230 Volt alternating voltage has to cor-
respond to the existent mains voltage.
Never lift, carry or xate the device by using the power cable.
Make sure that the electrical plug connection is placed in a ood-proof area and is protected
from moisture.
Disconnect the mains plug before starting the maintenance work at the compressor
.
The user is responsible for complying with the location specic safety and mounting regula-
tions (you can ask an electrician)
In case of device failure the repairs can be carried out only by an electrician or by the WilTec-
repair service.


Specyfikacje produktu

Marka: WilTec
Kategoria: kompresor
Model: AF189

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z WilTec AF189, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kompresor WilTec

Instrukcje kompresor

Najnowsze instrukcje dla kompresor

MSW

MSW -SPS-24 Instrukcja

15 Października 2024
MSW

MSW -UVRSRI Instrukcja

15 Października 2024
Ferm

Ferm CRM1027 FCO-1524 Instrukcja

13 Października 2024
Einhell

Einhell BT-AC 180/6 Kit Instrukcja

9 Października 2024
Ozito

Ozito ACP-2115K Instrukcja

9 Października 2024
Anova

Anova CA30S Instrukcja

8 Października 2024
Anova

Anova CA50S Instrukcja

8 Października 2024
DeWalt

DeWalt DCC2520 Instrukcja

8 Października 2024
SPL

SPL Kultube Instrukcja

8 Października 2024