Instrukcja obsługi Wells HW10

Wells czajnik HW10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Wells HW10 (20 stron) w kategorii czajnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/20
WELLS BLOOMFIELD, LLC
10 Sunnen Dr., St. Louis, MO 63143
telephone: 314-678-6314
fax: 314-781-2714
www.wells-mfg.com
IMPORTANT: DO NOT DISCARD THIS MANUAL
This manual is considered to be part of the appliance and is to be given to the OWNER or
MANAGER of the restaurant, or to the person responsible for TRAINING OPERATORS of
this appliance. Additional manuals are available from your WELLS DEALER.
THIS MANUAL MUST BE READ AND UNDERSTOOD BY ALL PERSONS USING OR
INSTALLING THIS APPLIANCE. Contact your WELLS DEALER if you have any
questions concerning installation, operation or maintenance of this equipment.
OWNERS MANUAL
WELLS
COUNTERTOP
HW-Series
COOK ’N HOLD
WARMERS
with
THERMOSTAT
CONTROL
MODELS
HW10
HW-SMP
Includes
INSTALLATION
USE & CARE
EXPLODED VIEW
PARTS LIST
WIRING DIAGRAM
005
p/n 2M-305146 Rev. E M005 111129
Model HW-SMP
Model HW10
005 p/n 2M-305146 Owners M Countertop Cook’N Hold Warmers
Unless otherwise specified, all commercial cooking
equipment manufactured by WELLS MANUFACTURING is
warranted against defects in materials and workmanship for
a period of one year from the date of original installation or
18 months from the date of shipment from our factory,
whichever comes first, and is for the benefit of the original
purchaser only.
THIS WARRANTY IS THE COMPLETE AND ONLY
WARRANTY, EXPRESSED OR IMPLIED IN LAW OR IN
FACT, INCLUDING BUT NOT LIMITED TO, WARRANTIES
OF MERCHANTABILITY OR FITNESS FOR ANY PARTIC-
ULAR PURPOSE, AND/OR FOR DIRECT, INDIRECT
OR CONSEQUENTIAL DAMAGES IN CONNECTION
WITH WELLS PRODUCTS. This warranty is void if it is
determined that, upon inspection by an authorized service
agency, the equipment has been modified, misused, misap-
plied, improperly installed, or damaged in transit or by fire,
flood or act of God. It also does not apply if the serial name-
plate has been removed, or if service is performed by unau-
thorized personnel. The prices charged by Wells Manufac-
turing for its products are based upon the limitations in this
warranty. Seller’s obligation under this warranty is limited to
the repair of defects without charge by a Wells Manufactur-
ing factory authorized service agency or one of its sub-
service agencies. This service will be provided on custom-
er’s premises for non-portable models. Portable models (a
device with a cord and plug) must be taken or shipped to
the closest authorized service agency, transportation charg-
es prepaid, for service. In addition to restrictions con-
tained in this warranty, specific limitations are shown in the
Service Policy and Procedure Guide. Wells Manufacturing
authorized service agencies are located in principal cities.
This warranty is valid in the United States and Canada and
void elsewhere. Please consult your classified telephone
directory, your foodservice equipment dealer or contact:
Wells Manufacturing
10 Sunnen Dr., St. Louis MO 63143 USA
phone (314) 678-6314 or fax (314) 781-2714
for information and other details concerning warranty.
LIMITED WARRANTY STATEMENT
SERVICE POLICY AND PROCEDURE GUIDE and ADDITIONAL WARRANTY EXCLUSIONS
NOTE: For your protection, please note that equipment in
this shipment was carefully inspected and packaged by
skilled personnel before leaving the factory. Upon
acceptance of this shipment, the transportation company
assumes full responsibility for its safe delivery.
IF SHIPMENT ARRIVES DAMAGED:
1. VISIBLE LOSS OR DAMAGE: Be certain that any
visible loss or damage is noted on the freight bill or
express receipt, and that the note of loss or damage is
signed by the delivery person.
2. FILE CLAIM FOR DAMAGE IMMEDIATELY:
Regardless of the extent of the damage.
3. CONCEALED LOSS OR DAMAGE: if damage is
unnoticed until the merchandise is unpacked, notify the
transportation company or carrier immediately, and file
“CONCEALED DAMAGE” claim with them. This
should be done within fifteen (15) days from the date
the delivery was made to you. Be sure to retain the
container for inspection.
Wells Manufacturing cannot assume liability for damage or
loss incurred in transit. We will, however, at your request,
supply you with the necessary documents to support your
claim.
SHIPPING DAMAGE CLAIM PROCEDURE
xi
1. Resetting of safety thermostats, circuit breakers, over
load protectors, and/or fuse replacements are not
covered by this warranty unless warranted conditions
are the cause.
2. All problems due to operation at voltages or phase
other than specified on equipment nameplates are
not covered by this warranty.
Conversion to correct voltage and/or phase must be
the customer’s responsibility.
3. All problems due to electrical connections not made
in accordance with electrical code requirements
and wiring diagrams supplied with the equipment are
not covered by this warranty.
4. Replacement of items subject to normal wear, to
include such items as knobs, light bulbs; and, normal
maintenance functions including adjustments of
thermostats, adjustment of micro switches and
replacement of fuses and indicating lights are not
covered by warranty.
5. Damage to electrical cords and/or plug due to exposure
to excessive heat are not covered by this warranty.
6. Full use, care, and maintenance instructions supplied
with each machine. Noted maintenance and
preventative maintenance items, such as servicing and
cleaning schedules, are customer responsibility. Those
miscellaneous adjustments noted are customer
responsibility. Proper attention to preventative
maintenance and scheduled maintenance procedures
will prolong the life of the appliance.
7. Travel mileage is limited to sixty (60) miles from an
Authorized Service Agency or one of its sub-service
agencies.
8. All labor shall be performed during regular working
hours. Overtime premium will be charged to the buyer.
9. All genuine Wells replacement parts are warranted for
ninety (90) days from date of purchase on non-
warranty equipment. This parts warranty is limited only
to replacement of the defective part(s). Any use of
non-genuine Wells parts completely voids any
warranty.
10. Installation, labor, and job check-outs are not
considered warranty and are thus not covered by this
warranty.
11. Charges incurred by delays, waiting time or operating
restrictions that hinder the service technician’s ability to
perform service are not covered by warranty. This
includes institutional and correctional facilities.
WARRANTY xi
SPECIFICATIONS 1
FEATURES & OPERATING CONTROLS 2
PRECAUTIONS & GENERAL INFORMATION 3
AGENCY LISTING INFORMATION 3
INSTALLATION 4
OPERATION 5
CLEANING INSTRUCTIONS 6
TROUBLESHOOTING SUGGESTIONS 8
MAINTENANCE INSTRUCTIONS 9
EXPLODED VIEW & PARTS LIST 10
WIRING DIAGRAM 12
PARTS & SERVICE 16
CUSTOMER SERVICE DATA 17
Thank You for purchasing this Wells Manufacturing appliance.
Proper installation, professional operation and consistent maintenance of this appliance will ensure that it
gives you the very best performance and a long, economical service life.
This manual contains the information needed to properly install this appliance, and to use and care for the
appliance in a manner which will ensure its optimum performance.
TABLE OF CONTENTS
SPECIFICATIONS
INTRODUCTION
1
005 p/n 2M-305146 Owners M Countertop Cook’N Hold Warmers
MODEL DESCRIPTION VOLTS WATTS AMPS PHASE POWER PLUG
HW-10 11 QT ROUND
120 1650 13.7
1
4’ NEMA 5-15P
208 1240 6.0 4’ NEMA 6-15P
230UK 1525 6.6 BS 1363A
240 1650 6.9 4’ NEMA 6-15P
HW/SMP 12” x 20” REC-
TANGULAR
120 1800 15.0 4’ NEMA 5-15P
208 1350 6.5 4’ NEMA 6-15P
240 1800 7.5 4’ NEMA 6-15P

Specyfikacje produktu

Marka: Wells
Kategoria: czajnik
Model: HW10

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Wells HW10, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje czajnik Wells

Wells

Wells HW10 Instrukcja

12 Września 2024

Instrukcje czajnik

Najnowsze instrukcje dla czajnik

Kenwood

Kenwood SKM100 Instrukcja

15 Października 2024
Sharp

Sharp SA-BK2002I Instrukcja

15 Października 2024
Russell Hobbs

Russell Hobbs Inspire 24364 Instrukcja

14 Października 2024
Exquisit

Exquisit WK 6103 swi Instrukcja

14 Października 2024
Severin

Severin WK 9555 Instrukcja

12 Października 2024
Sunbeam

Sunbeam Simply Shine KEP4007BK Instrukcja

10 Października 2024
Ninja

Ninja Perfect Temperature KT200UK Instrukcja

9 Października 2024
Imarflex

Imarflex IKW-715DS Instrukcja

9 Października 2024
Imarflex

Imarflex IK-716EF Instrukcja

9 Października 2024
Imarflex

Imarflex IKW-717S Instrukcja

9 Października 2024