Instrukcja obsługi Weldex WDC-4605XV

Weldex Kamera monitorująca WDC-4605XV

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Weldex WDC-4605XV (14 stron) w kategorii Kamera monitorująca. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
V.00
WDC-4605XV
1/3” High Resolution Face View Camera
1.0 Features
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK),
NO USER SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
1/3” Sony Super HAD CCD
User Friendly OSD Menu Control
High Resolution of 600 TV Line
Easy Camera Level Adjustment
Day& Night
Dual Power : DC 12V and AC 24V
DNR (Digital Noise Reduction)
Privacy Function
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions :
(1)This device may not cause harmful interference, and
(2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class A
These limits are designed to provide
digital device, pursuant to Part 15 of the FCC Rules.
reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
may cause harmful interference
installed and use in accordance with the instructions,
to radio communications.
Operation of this equipment in a residential area is likely to cause interference, in which
interference at his own expense.
case the user will be required to correct the
WARNING-
Changes or modications not ex essly pr approved by the man urufact er c ld void the users aut ity to ou hor operate the equipment.
CAUTION- To prevent electric shock and risk of re hazards:
Do NOT use power sources other than that specied. Do NOT expose this appliance to rain or moisture.
The lightning ash With an arrowhead symbol, within an equilateral triangle is intended to alert the user to
the presence of uninsulated dangerous voltage within the product's enclosure that may be of sucient
magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intendede to alert the user to the presence of important
operating and maintenance (servicing) instructions in the literature accompanying the appliance
Operation Manual 2.
1/3” High Resolution Face View Camera WDC-4605XV
1/3” High Resolution Face View Camera WDC-4605XV
Operation Manual 3.
2.0 Warnings
The camera needs periodic inspection.
Contact an authorized technician for inspection.
Stop using your camera when you nd a malfunction.
If you use your camera around smoke or unusual heat for a long time, re may be caused.
Do not Install the camera on a surface that can not support it.
Unless the surface is suitable, it could cause falling or other hazards.
Do not hold plug with wet hands.
It could cause an electric shock.
Do not disassemble the camera.
It may result in re, electric shock or other hazards.
Do not use the camera close to a gas or oil leak.
It may result in re or other hazards.
3.0 Precautions
Do not install the camera in e e xtrem
temperature c tondi ions.
Only use t he camera under condi iont s
where t t s a empera ure re be weet n -10
Deg. C and + 50 Deg. C. (14 Deg. F and
122 Deg. F) Be especially care ulf to
pr idov e v t t n en ila io when o t g pera in
under high temperatures.
Do not in stall or u the se camera in an
environment where the humidity is high.
It can cause t he image q ty uali to be
poor.
Do not in the stall camera under
uns e tabl ligh int g c t s.ondi ion
Sev ere ligh int g c e hang or f c li erck an
cau t se hecamera to work improperly.
Do not t ch the ou front lens of the
cam a.er
It is one of t he most impor ant t parts
of t c . Be he amera care ulf not to be
stained by ngerprint.
Do not drop the camera or s ubject
them to physical shocks.
It can cause mal uncf tions to occur.
Never k p the ee camera face t o
str l t ong igh directly.
It can damage t heCCD.
Do not ex sepo the camera to rain
or s l b ge pil evera on it.
If it gets wet, wipe it dry immedia elyt .
Liq s c c t uid an on ain minerals t t ha
co rodr e t he electronic components.
Do no t ex t he a to pos e came r
radioactivity.
If it is exposed to radioa ivict ty, F or
heated CCD, it will be out of order.
Note
If the camera is exposed to spotlight or object reecting strong light, smear or blooming may occur.
Please check that the power satises the normal specication before connecting the camera.

Specyfikacje produktu

Marka: Weldex
Kategoria: Kamera monitorująca
Model: WDC-4605XV

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Weldex WDC-4605XV, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kamera monitorująca Weldex

Weldex

Weldex WDAC-5700C Instrukcja

22 Września 2024
Weldex

Weldex WDAC-4277DT Instrukcja

20 Września 2024
Weldex

Weldex WDC-4605XV Instrukcja

20 Września 2024

Instrukcje Kamera monitorująca

Najnowsze instrukcje dla Kamera monitorująca

Trebs

Trebs CCD-401C Instrukcja

15 Października 2024
Hikvision

Hikvision DS-2CE56D5T-AIRZ Instrukcja

15 Października 2024
D-Link

D-Link DCS-7510 Instrukcja

15 Października 2024
Ubiquiti Networks

Ubiquiti Networks UniFi Video UVC-G3-AF Instrukcja

14 Października 2024
Hikvision

Hikvision DS-2TD2137-7/VP Instrukcja

13 Października 2024
Alecto

Alecto DVC-215IP Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2DE7A245IX-AE/S1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2TD2166-15/V1 Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2325FWD-I Instrukcja

13 Października 2024
Hikvision

Hikvision DS-2CD2323G2-IU Instrukcja

12 Października 2024