Instrukcja obsługi Watts EFHT BASIC

Watts termostat EFHT BASIC

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Watts EFHT BASIC (3 stron) w kategorii termostat. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Power < 1500W
Max Power 3600W
±0,1°C
0°C 40°C
+5°C to 35°C
10°C to 40°C
Proportional band 10min for 2°K
or Static differential 0.5°K
Class II - IP21
Polar White RAL 9010
Two poles 16A
Relay 16A 250Vac resistive load (AC1)
230VAC ± 10%
NTC 10k Ω 25°C
(only supplied with Wattstemp 740)
Red blinking:
- 0.5 second cycle
=> Internal & external sensor failures
- 1 second cycle
=> Internal sensor failure
- 2 seconds cycle
=> External sensor failure
USER GUIDE GB
Wattstemp serie: Basic Flush mounted thermostat.
CONFIGURATION SWITCH
On
1 2 3 4 Off
MODES DESCRIPTION
External sensor 10K
Power load 1:
static differential
proportional
Regulation mode 2:
* The defaults setting are underlined.
- Regulation on internal sensor
- Regulation on external sensor
- Regulation internal room sensor
with lower limit floor on ext. probe
- Regulation on internal room sensor
with upper limit floor on ext. probe
Sensor mode 3&4 :
Electronic thermostat specially designed to control the Electrical floor heating.
External pilot wire for night reduction (-4°K)
Wattstemp 730: Regulation on room sensor.
Wattstemp 740: Possibility to regulate either the floor or room temperature, or
combined (in this case, the floor sensor is used as
temperature limiter)
LED INDICATOR
Red: - Heating indication
Green: - reduction mode by clock (pilot wire)
Orange: - Heating during reduction mode by clock (pilot wire)
ON /OFF switch.
16A Relay .
The product is supplied with two fronts and frames (Square and round) for
system ELKO RS/B&J JUSSI and ELJO TREND following the version.
Main
Switch.
TECHNICAL CHARACTERISTICS
LED
Indicator.
Floor limit
setting.
Configuration
switch.
Room
setting.
PPLIMW01565Cb
2
4 5
PPL IMP 1
560
A
1
Min 20cm
~1,50 m
SE Installation
FIN Asennus
F Installation Installation Installation Installazione Instalación
GB
NL
D I E
instalação
P installatie Installasjon
N
1
2
L N
230 Vac
L N
60mm
60 mm
3
3
4
25,5mm 32,5mm 81,5 mm
81,5 mm
3
6
15 min
1
3
2
4
SE Kalibriering
FIN Säädön Rajoitus
F Calibration Calibration Kalibrierung Calibrazione Calibración
GB
NL
D I E
Calibração
P Calibratie Kalibriering
N
= 23°C


Specyfikacje produktu

Marka: Watts
Kategoria: termostat
Model: EFHT BASIC

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Watts EFHT BASIC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje termostat Watts

Instrukcje termostat

Najnowsze instrukcje dla termostat