Instrukcja obsługi Vonroc S_WC501AC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vonroc S_WC501AC (9 stron) w kategorii frezarka. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
WWW.VONROC.COM 2
A
B
3 6 7
2
1 0 11 1
4
5
98
12
312
765
13
WWW.VONROC.COM 3
C
D
16
15
17
18
19
14
20
21 5
76
10
EN
WWW.VONROC.COM
• Wait until the machine has reached full speed.
• Slowly move the machine along the pre-drawn
lines from top to bottom, firmly pressing the
guide roller (8) against the wall (fig.H).
• Do not apply too much pressure on the machi-
ne. Let the machine do the work.
• Switch off the machine and wait for the ma-
chine to come to a complete standstill before
putting the machine down.
5. MAINTENANCE
Always disconnect the machine from the
main power supply before carrying out any
maintenance work.
Clean the machine casings regularly with a soft
cloth, preferably after each use. Make sure that the
ventilation openings are free of dust and dirt.
Remove very persistent dirt using a soft cloth
moistened with soapsuds. Do not use any solvents
such as gasoline, alcohol, ammonia, etc. Chemicals
such as these will damage the synthetic components.
ENVIRONMENT
Faulty and/or discarded electrical or
electronic apparatus have to be collected at
the appropriate recycling locations.
Only for EC countries
Do not dispose of power tools into domestic waste.
According to the European Guideline 2012/19/
EC for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
friendly way.
WARRANTY
VONROC products are developed to the highest
quality standards and are guaranteed free of
defects in both materials and workmanship for the
period lawfully stipulated starting from the date of
original purchase. Should the product develop any
failure during this period due to defective material
and/or workmanship then contact VONROC directly.
The following circumstances are excluded from this
guarantee:
• Repairs and or alterations have been made
or attempted to the machine by unauthorized
service centers;
• Normal wear and tear;
• The tool has been abused, misused or
improperly maintained;
• Non-original spare parts have been used.
This constitutes the sole warranty made by compa-
ny either expressed or implied. There are no other
warranties expressed or implied which extend
beyond the face hereof, herein, including the im-
plied warranties of merchantability and fitness for
a particular purpose. In no event shall VONROC be
liable for any incidental or consequential damages.
The dealers remedies shall be limited to repair or
replacement of nonconforming units or parts.
The product and the user manual are subject to
change. Specifications can be changed without
further notice.
Specyfikacje produktu
| Marka: | Vonroc |
| Kategoria: | frezarka |
| Model: | S_WC501AC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Vonroc S_WC501AC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje frezarka Vonroc
8 Października 2024
8 Października 2024
8 Października 2024
30 Sierpnia 2024
24 Sierpnia 2024
6 Sierpnia 2024
Instrukcje frezarka
- frezarka Worx
- frezarka Bosch
- frezarka Yato
- frezarka Parkside
- frezarka Festool
- frezarka Stanley
- frezarka Black & Decker
- frezarka Scheppach
- frezarka RIKON
- frezarka Grizzly
- frezarka Gardena
- frezarka DeWalt
- frezarka Einhell
- frezarka Makita
- frezarka Ozito
- frezarka Fuxtec
- frezarka Flex
- frezarka Trotec
- frezarka Meec Tools
- frezarka AL-KO
- frezarka Güde
- frezarka Texas
- frezarka Mafell
- frezarka Westfalia
- frezarka Ferm
- frezarka Hitachi
- frezarka PowerPlus
- frezarka Skil
- frezarka Alpina
- frezarka Kinzo
- frezarka Trend
- frezarka Maktec
- frezarka Bort
- frezarka Power Craft
- frezarka Eibenstock
- frezarka Topcraft
- frezarka Gamma
- frezarka Carat
- frezarka Duro
- frezarka Truper
- frezarka Bruder Mannesmann
- frezarka Rupes
- frezarka Protool
- frezarka Holzmann
- frezarka Stomer
- frezarka Elu
- frezarka Triton
- frezarka Anova
- frezarka Felisatti
- frezarka Toledo
- frezarka CMT Orange Tools
Najnowsze instrukcje dla frezarka
27 Grudnia 2024
23 Grudnia 2024
15 Października 2024
14 Października 2024
4 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
2 Października 2024
2 Października 2024