Instrukcja obsługi Viper XpressKit 528T Relay Module
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viper XpressKit 528T Relay Module (1 stron) w kategorii pilot. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
© 2005 Directed Electronics, Inc.N528T 01-05
This special accessory is an adjustable timer with a built-in 15A relay. The ‘pulse’ timer can be triggered by a +
or - pulse, or a change of state (from + to -, or visa-versa) on the stripe wire.
Not
Not
Not
NotNote:
e:
e:
e:e: Do not exceed 15 amp draw with the 528T or damage will occur. If more current is needed,
use the timer with an external 30 amp SPDT relay.
This product has many popular uses by installers of mobile electronics. Some examples include: creating a wait-
to-start trigger for remote starting diesel vehicles that do not have wait to start triggers.
If you need to disconnect a circuit for a certain amount of time so that the alarm does not activate, you can
use the pulse timer’s normally closed circuit. Pulse the strip wire to disconnect the circuit for up to 60-seconds.
528T
ORANGE 87A NORMALLY CLOSED
BROWN 87 NOT USED
YELLOW 30 COMMON
BLUE LOOP
UNCUT = TRIGGER UPON RECEIVING NEGATIVE
CUT = (NOT USED)
BLACK W/STRIPE - NOT USED
BLACK - GROUND
RED - +12 VDC GROUND
ALARM
DOORSWITCH INPUT
DOORSWITCH
528T
ORANGE 87A NOT USED
WAIT TO START NEGAITVE INPUT WIRE (DIESELS)
BROWN 87 NORMALLY OPEN
YELLOW 30 COMMON
BLUE LOOP
UNCUT = TRIGGER UPON RECEIVING NEGATIVE
CUT = (NOT USED)
BLACK W/STRIPE - TRIGGER INPUT
BLACK - GROUND
RED - +12 VDC GROUND
REMOTE START
MODULE
CONNECT YELLOW 30 COMMON TO GROUND
528T
ORANGE 87A NORMALLY CLOSED
BROWN 87 NORMALLY OPEN
YELLOW 30 COMMON
BLUE LOOP
UNCUT = TRIGGER UPON RECEIVING NEGATIVE
CUT = TRIGGER UPON NEGATIVE GOING AWAY
BLACK W/STRIPE - TRIGGER INPUT
BLACK - GROUND
RED - +12 VDC GROUND
528T Pulse Timer
Specyfikacje produktu
| Marka: | Viper |
| Kategoria: | pilot |
| Model: | XpressKit 528T Relay Module |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Viper XpressKit 528T Relay Module, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje pilot Viper
22 Maja 2024
14 Maja 2024
Instrukcje pilot
- pilot Sony
- pilot PeakTech
- pilot Motorola
- pilot Technics
- pilot Geemarc
- pilot Panasonic
- pilot Theben
- pilot Canon
- pilot Crestron
- pilot Nedis
- pilot Marquant
- pilot Garmin
- pilot Steinel
- pilot DJI
- pilot Alpine
- pilot Chamberlain
- pilot Lindy
- pilot JVC
- pilot Vimar
- pilot Perel
- pilot Ferguson
- pilot Fusion
- pilot Homematic IP
- pilot DataVideo
- pilot One For All
- pilot Danfoss
- pilot Delta Dore
- pilot Iogear
- pilot Harman Kardon
- pilot Maginon
- pilot Abus
- pilot Hama
- pilot Marmitek
- pilot Reely
- pilot Schwaiger
- pilot Insignia
- pilot Hager
- pilot Infinity
- pilot Vivanco
- pilot EQ-3
- pilot JUNG
- pilot Monacor
- pilot Cotech
- pilot Dot Line
- pilot Clas Ohlson
- pilot RADEMACHER
- pilot Arctic Cooling
- pilot REVO
- pilot Artsound
- pilot Ruwido
- pilot RGBlink
- pilot AMX
- pilot Rotel
- pilot Compustar
- pilot C2G
- pilot Energy Sistem
- pilot Sonos
- pilot Vello
- pilot Satechi
- pilot Sonoff
- pilot Manfrotto
- pilot Multibrackets
- pilot MIOPS
Najnowsze instrukcje dla pilot
11 Października 2024
27 Września 2024
27 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
25 Września 2024
21 Września 2024
16 Września 2024
15 Września 2024