Instrukcja obsługi Viking W-2000A-EWP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viking W-2000A-EWP (4 stron) w kategorii Interkom. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
PRODUCT MANUAL
Designed, Manufactured and Supported in the USA
C O M M U N I C AT I O N & S E C U R I T Y S O L U T I O N S
Answer Your Door or Gate from the Safety of
Any Phone in Your Home or Business
Features
The W-Series handsfree doorboxes are available in
three different chassis configurations. The W-1000
has an aluminum faceplate with black textured powder
paint and call progress LED. The W-2000A provides
a surface mount light grey UV stable plastic chassis.
The W-3000 provides an attractive vandal resistant
stainless steel faceplate and call progress LED. The
W-Series are designed to interface directly with an
unused analog telephone line input of phone system.
One or two doorboxes can also share an existing
phone line when used with a doorboxC-1000B
controller.
When the “ “ button is pressed, the doorboxCall
generates a standard or custom ring cadence of an
adjustable number of rings. For noisy environments,
the doorbox’s new louder speaker output and
“Push-to-Talk” feature can be used.
The EWP versions share all of the features of the
standard W-Series in addition to Enhanced Weather
Protection (EWP) for outdoor installations where the
unit is exposed to precipitation or condensation. EWP
products feature foam rubber gaskets and boots,
sealed connections, gel-filled butt connectors, as well
as urethane or thermal plastic potted circuit boards
with internally sealed, field-adjustable trim pots and
DIP switches for easy on-site programming. For more
information, see .DOD 859
• W-1000 Faceplate: Vandal resistant 12 gauge
louvered aluminum with weather resistant black
textured powder paint and UV stable white silk
screened graphics.
• W-2000A Chassis: Impact resistant, UV stable, light
grey Geloy plastic with black UV stable pad printed
graphics. Surface mount only.
• W-3000 Faceplate: Vandal resistant 14 gauge
louvered 316 marine grade stainless steel with #4
brushed finish and permanent laser etched graphics.
• Connect to a phone system’s unused trunk input, FXO
port or a Viking ControllerC-1000B
• Marine grade 316Weather Resistant Features:
stainless steel screws and push button switch
(W-1000/W-3000). Switch internally sealed per IP67.
Mylar speaker. Self-draining mic mount. Faceplate,
mic and speaker gaskets.
• Blue call progress / night light LED (W-1000/W-3000)
• High output speaker amplifier with volume adjustment
• Microphone volume adjustment POT
• 40 volt talk battery
• 20 Hz ring generator (6.0 REN ring load maximum)
• Selectable ring cadence (standard, double,
short/short/long, or short/long/short)
• Selectable number of rings (2, 3, 10 or 30)
• Selectable “Push-to-Talk” feature for noisy
environments
• Operating temperature range: -15°F to 130°F
• EWP versions are designed to meet IP66 Ingress
Protection Rating (see for more info)DOD 859
• Ideal for noisy locations in “Push-to-Talk” mode
• Commercial, industrial or residential door security
• Door or gate communication
• Truck stop/gas station fuel island communication
• Use with the controller for single lineC-1000B
residential systems or when the operation of door
strikes or gate openers is necessary (see )DOD 155
Power: 120V AC/13.8V AC 1.25A UL listed adapter provided
W-1000/W-3000 Dimensions: Overall - 5.0” x 5.0” x 2.25”
(127mm x 127mm x 57.2mm) Plastic Rough-In Box - 4.0” x
4.0” x 2.12” (102mm x 102mm x 54mm)
W-2000A Dimensions: 5.5” x 4.5” x 1.7” (140mm x 115mm x
43mm)
Shipping Weight: 4 lbs (1.81 Kg)
Operating Temperature: -15°F to 130°F (-26°C to 54°C)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
Ringer Output: 20 Hz, 6.0 REN load maximum
Maximum Line Loop Length with 24 AWG Twisted Pair:
6300 ft (1.9 Km)
Maximum Power Run Length with CAT5 Wire: 1 pair =
150ft, 2 pair = 300ft, 3 pair = 450ft Note: Power run length
may be increased, see sectionWiring
Connections: (4) gel filled butt connectors
W-Series
Vandal Resistant
Handsfree Doorboxes
January 4, 2019
Applications
Specifications
www.VikingElectronics.com
Information: 715-386-8861
VIKING
W-1000/
W-1000-EWP
Flush Mount
Black Powder
Painted Aluminum
W-2000A/
W-2000A-EWP
Surface Mount Light
Grey UV Stable
Plastic Chassis
W-3000/
W-3000-EWP
Flush Mount
Brushed 316
Stainless Steel
Installation
IMPORTANT: Electronic devices are susceptible to lightning and power station electrical surges from both the AC
outlet and the telephone line. It is recommended that a surge protector be installed to protect against such surges.
Caution: When warm air comes in contact with cold surfaces, such as outside walls, it causes condensation. To
help prevent condensation from accumulating inside the , bring conduit into the bottom of the unit.W-1000/3000
If this is not possible, drill a 1/4” diameter hole in the bottom of the plastic rough-in box.
A. Mounting the W-1000 and W-3000
Front View of Optional
VE-5x5 Surface Mount
Box (not included)
2.25”
Condensation
Drain Hole
5.14”
5.22” 3.25”
Call
4.0"
Rear View of VE-5x5
(not included)
5.0” Typical W-3000-EWP
shown with
optional
Viking Model
VE-5X5
Surface
Mount Box
and
VE-GNP
Gooseneck
Pedestal
(4) 0.38” diameter (for gooseneck mounting)
(4) 0.2 x 0.43 slots for double gang box
(2) 0.2 x 0.43 slots for single gang box
(1) 0.74"
diameter
3.0” 3.3”
3.0”
2.1”
Wall Stud
*Included Plastic
Rough-In Box
(part # 259576)
Wire
knock-out
Push to Call Button
Blue Call Progress/Nightlight LED
(4) 6-32 X 3/4” Marine grade 316 stainless
steel, flat head, T-10 Torx head security
screws and drive bit (included)
Condensation Drain Hole
* Note: www.vikingelectronics.comThe plastic rough-in box (part # 259576) may be purchased separately in advance. Go to
and click on “spare parts”. Note that (1) plastic rough-in box comes with the unit.
The optional Surface Mount Box is VE-5x5
designed to be surface mounted to a single
gang box, double gang box or VE-GNP
gooseneck pedestal (right). For more
information on the and see VE-5x5 VE-GNP
DOD# 424.
1/8" thick foam gasket (included): Peel off paper
liner and adhere gasket to the back of the faceplate,
centering it over the four corner mounting holes.
Marine grade 316 stainless
steel faceplate (W-3000 only)
Marine grade 316 stainless
steel push button switch
(sealed per IP67)
|
OR
|
Important: The
W-1000 W-3000 or
will mount to NOT
a standard double
gang box.
(2) Standard flat head
dry wall (sheet rock)
screws (not included)
Optional VE-5x5 Surface
Mount Box (not included)
UP
3.40”
3.30”2.35”3.40”
1.55”
Mount the back panel to a
wall, a single gang box or
a 4” x 4” junction box with
the arrow pointing up.
Attach the cover to the
base with the two included
screws as shown.
Internal View of the back panel
W-2000A / W-2000A-EWP
Side View of the
W-2000A / W-2000A-EWP
Rear View of the
W-2000A / W-2000A-EWP
Mounting Specifications
B. Mounting the W-2000A
The and W-2000A W-2000A-EWP are designed to be surface mounted to a single gang box (not included), a
standard 4” x 4” electrical junction box (not included), or directly to a wall or flat sided post.
Note: For outdoor applications apply a bead of caulk between back panel and wall.
2
Programming
Switch 1 Switch 2 Ring Cadence
OFF OFF Standard: 1 sec on, 3 secs off (default)
ON OFF Double: 1 sec on, 0.5 sec off, 1 sec on, 3.5 sec off
OFF ON Short/Short/Long: 0.5 sec on, 0.5 sec off, 0.5 sec on, 0.5 off, 1 sec on, 3 secs off
ON ON Short/Long/Short: 0.5 sec on, 0.5 sec off, 1 sec on, 0.5 sec off, 0.5 sec on, 3 secs off
ON
1 2 3
ON
1 2
S1 DIP Switches
S2 DIP Switches
ON
OFF
ON
OFF
O N
1 2 3
O N
1 2
EART H
GND O UT TO
PH O N E KEYLESS
C.C . INP UT DO O R
BO X 1 D O O RB O X
13VAC P WR DO O R
BO X 2 N .O. CO M N. C.
DO OR S TR IKE 1
SI G GND
VID EO 1 IN S IG GND
VID EO 2 IN S IG GND
VID EO OU T
N.O . CO M N. C.
DO OR S TR IKE 2
T ALK BAT TER Y
OFF ON
C
LED1
C
LED2
C
LED3
ON
1 2 3
CO M N. O. N.C . - - - - AUX.
CO N T ACT
OU T P U T
VIKING ©
VIKING
ELE CT RONIC S
HUDSO N, WI 54016
DOOR ENTRY / CCTV VIDEO
CONTROLLER
POW ER 13.8V AC
MODEL C-1000B
PHO NE LINE
INPUT
EARTH
GN D
21 3 4 5 14 15 16
LINE O UTT O PHO NES
6 7
KEYLESS CO NTAC T
CLO SURE INPUT
DO ORBOX 1
DO ORBOX 2
8 9 10 11
DO ORBO X
PWR O UT PUT
12 13
DO ORST RIKE 1
N.O .
CO M
N.C .
17 18 19
DO OR
ST RIKE 2
N.O .
CO M
N.C .
.O . LI E
INP U T
ON
1 2 3
ON
1 2
OR
Unused
PABX/KSU
Trunk Input
3.63" Typical
3.63"
** Earth
Ground
(optional)
(Spade
connector
included)
Multi-Line
Phone
C.O.
Line
To 2nd
Doorbox
C-1000B Controller
Rear View of W-1000 / W-3000
Single Line
Phone
* Gel-Filled Butt
Connectors
*** 13.8VAC
(18VAC max)
** Earth
Ground
(optional)
(Spade
connector
included)
ON
1 2 3
ON
1 2
Rear View of W-2000A
120V AC
Wire as
shown below
Wire as
shown
below
Red/Black
Black/Red
Wires from
W-1000 / W-2000A / W-3000
Green (Tip)
Red (Ring)
C. Wiring CAUTION:
Do install aNOT
W-1000,W-2000A
or W-3000 on a
telephone line
without a C-1000B
Controller
(see ).DOD 155
* Note: The gel-filled (water-tight) butt connectors are
designed for insulation displacement on 19-26 guage wire
with a maximum insulation of 0.082 inches. Cut off
stripped wire ends prior to terminating.
** Note: To increase surge protection, loosen the PCB mounting screw labeled (as shown above) and fasten
a wire with spade terminal (included) from the mounting screw to Earth Ground (grounding rod, water pipe, etc.)
*** Warning: The power run wire length is limited to 150 ft of CAT5 wire. Longer power runs will require heavier
gauge wire (doubling or tripling pairs) and/or a higher voltage power adapter. Voltage at the doorbox power input
connections must not exceed 18VAC RMS.
A. DIP Switches
S2 DIP Switch Settings
Switch 1 Switch 2 Ring Output
OFF OFF 2 rings
ON OFF 3 rings
OFF ON 10 rings (default)
ON ON 30 rings
S1 DIP Switch Settings
Switch 3 Communication Mode
OFF Normal Handsfree Mode (default)
ON Push-To-Talk Mode
Note: All switches shown in factory default settings.
B. Handsfree Operation (S1 Dip Switch 3 - OFF)
When the “ ” button is pressed, the call progress LED (on Call W-1000/W-3000 W-Seriesonly) will turn off and the
Doorbox will begin generating a 20 Hz ring signal. The caller at the will hear an audio ring back signalDoorbox
while the LED flashes. When the inside party has answered, the LED will light until the inside party hangs up. At
that point, the LED will turn off for approximately one second and then light steady to illuminate the W-1000/W-
3000 after dark.
C. Push-To-Talk Operation (S1 Dip Switch 3 - ON)
In extremely noisy locations, the “Push-to-Talk” mode should be used. To switch to the “Push-to-Talk” mode, place
DIP switch 3 in the position (see ). To initiate a call, momentarily press the “ ”ON Dip Switch Programming Call
button to generate the ring signal. After the inside party has answered, press and hold the call button to talk.
Release the call button to listen. 3
Specyfikacje produktu
| Marka: | Viking |
| Kategoria: | Interkom |
| Model: | W-2000A-EWP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Viking W-2000A-EWP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Interkom Viking
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje Interkom
- Interkom Philips
- Interkom Hikvision
- Interkom Panasonic
- Interkom Alcatel
- Interkom ORNO
- Interkom Vimar
- Interkom Dahua Technology
- Interkom Emos
- Interkom Somfy
- Interkom DiO
- Interkom DataVideo
- Interkom EtiamPro
- Interkom Planet
- Interkom Axis
- Interkom Elro
- Interkom Marmitek
- Interkom Schwaiger
- Interkom ZKTeco
- Interkom Akuvox
- Interkom Busch-Jaeger
- Interkom Fibaro
- Interkom Hanwha
- Interkom Avidsen
- Interkom TOA
- Interkom Byron
- Interkom Monacor
- Interkom M-e
- Interkom Becken
- Interkom Smartwares
- Interkom Sygonix
- Interkom WHD
- Interkom Extel
- Interkom Steren
- Interkom Siedle
- Interkom Valcom
- Interkom Chacon
- Interkom Konig
- Interkom DoorBird
- Interkom Gira
- Interkom Russound
- Interkom Comelit
- Interkom Aiphone
- Interkom RTS
- Interkom Bitron
- Interkom Hollyland
- Interkom Leviton
- Interkom Ritto
- Interkom Syscom
- Interkom Pentatron
- Interkom CyberData Systems
- Interkom COMMAX
- Interkom Bintec-elmeg
- Interkom Eartec
- Interkom Gewiss
- Interkom Seco-Larm
- Interkom GEV
- Interkom Mobotix
- Interkom FlyingVoice
- Interkom Vibell
Najnowsze instrukcje dla Interkom
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024