Instrukcja obsługi Viking K-1900-8-IP-EWP

Viking Interkom K-1900-8-IP-EWP

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viking K-1900-8-IP-EWP (25 stron) w kategorii Interkom. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/25

Features

Applications Specifications

www.VikingElectronics.com

Information: 715-386-8861

• Vandal Resistant Features: 12 gauge 316 stainless steel faceplate with permanent

laser etched graphics. Heavy duty metal keypad, hook switch, armored cable and T-10

security Torx drive mounting screws.

• Marine grade 316 stainless steel faceplate and Torx Weather Resistant Features:

security screws. Internally sealed keypad. Faceplate gaskets (on EWP models).

• Ring with adjustable volume and cadence

• Hearing aid compatible amplified handset with sealed push button volume control

• Two sets of SPDT 2 Amp relay contacts for door/gate or camera control

• Optional for Secure Remote Relay Control, see RC-4A DOD 582

• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)

• PoE powered (class 2, <6.5 Watts)

• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging

• Network downloadable firmware

• : 12” armored handset cableK-1900-812L-IP and K-1900812LIPEWP

• : 36” armored handset cable K-1900-8-IP

• : 54” armored handset cable K-1900-8-IP-EWP

The K-1900-8-IP Series panel phone can either auto-dial a phone number each time the handset is lifted, be used

as a multi-number auto-dialer, or be used as a standard manual dial phone. The K-1900-8-IP Series phones are

designed to provide quick and reliable communication for SIP VoIP phone systems with PoE. The unit can be

programmed from any PC on the same LAN or remotely using a Static IP Address. The K-1900-8-IP Series phone

can dial up to 250 programmable numbers and another 250 rollover numbers.

When a call initiated by the phone is answered by an apartment or business tenant, a built-inK-1900-8-IP Series

contact closure may be activated to control an electric gate or door strike. Up to 1,000 keyless entry codes may

be programmed, providing tenants with keyless entry. A 26 Bit Wiegand input is provided for adding an optional

proximity card reader with capacity to program up to 1,000 card numbers. Keyless entry codes and card numbers

can be programmed to only allow access at specific times and/or day of the week. A request for exit (REX) input

is included for easy exiting. The phone also has automatic event logging allowing you to reviewK-1900-8-IP Series

the time and date of the call, which door was open/closed, what keyless entry code or proximity card was used,

request for exit usage and whether it was an inbound or outbound call.

The K-1900-812L-IP and K-1900812LIPEWP have a 12” long armored cable with internal stainless steel lanyard

for additional cable strength.

The K-1900-8-IP-EWP K-1900-8-IP K-1900-812L-IPand K-1900812LIPEWP shares all of the features of the and

in addition to Enhanced Weather Protection (EWP) for outdoor installations where the unit is exposed to precipitation

or condensation. EWP products are designed to meet IP66 standards and may feature foam rubber gaskets,

sealed connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed, field-adjustable

trim pots and DIP switches for easy on-site programming. For more information on EWP, see .DOD 859

• Programmable to speed dial up to 250 numbers

• 26 Bit Wiegand input for optional proximity card readers, see and DOD 221 228

• 26 Bit Wiegand output connect to card reader input of an Access Control System

• Cycles to rollover phone number on busy or no-answer

• Program up to 1,000 keyless entry codes and/or proximity card numbers

• Keyless entry codes and proximity card numbers can be programmed to only allow

access at specific times and day of week

• Event logging with time and date stamp

• Optional Enhanced Weather Protection (EWP) available, EWP products are designed to

meet IP66 Ingress Protection Rating, see DOD 859

• Remotely programmable

• Extended temperature range (-40°F to 140°F)

• Flush mount with included steel rough-in box

• Surface mount using an optional surface mount box (not included, see ) VE-5x10 DOD 424

• Optional kit to illuminate the front panel at night, see VE-LIGHT DOD 428

• Diagnostics (for testing relays)

Vandal Resistant VoIP Phone with

Auto Dialer, Keypad, and Entry System

• Apartment Entry Phone

• Commercial Gate Entrance

• Courtesy Assistance Phone

• Customer Service Phone

• Hot-Line Phone

• Door Entry Phone

• Kiosk Phone with up to

250 number speed dialing

• Use with Viking (DOD 221) or (DOD 228) Proximity Card PRX-1 PRX-3

Readers

• Use with Viking LRT-4 Long Range Transmitter (DOD 226)

Installation requires a Network Administrator / IT Technician

For complete , see page 2.Specifications

K-1900-8-IP-EWP

with 54” armored

cable

K-1900-8-IP

with 36”

armored cable

K-1900-812L-IP/

K-1900812LIPEWP

with 12” armored

cable and lanyard

PRODUCT

MANUAL

Designed, Manufactured and Supported in the USA K-1900-8-IP Series

VoIP Phone with Auto Dialer

Keypad, and Entry System

August 18, 2022

SECURITY & COMMUNICATION

VIKING

VoIP SIP System Compatibility

For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP

SIP System Compatibility List, DOD 944. To open and download this PDF file:

1. Go to www.vikingelectronics.com

and enter in the search box 944

2. Click Application Note (DOD 944)

to open and download the PDF

Scan the QR code below to open

and download the Viking VoIP

SIP System Compatibility List - OR -

Important: Exclusion from this list means only that compatibility has not been verified, it does not mean

incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.

Specifications

Power: PoE class 2 (<6.5 Watts)

Dimensions for K-1900-8-IP and K-1900-812L-IP Models

Phone only: 5.0” x 10.0” x 4.68” (127mm x 254mm x 119mm)

5.0” x 10.0” x 5.53” (127mm x 254mm x 141mm) Including rough-in box:

Dimensions for K-1900-8-IP-EWP and K-1900812LIPEWP Models

Phone only: 5.0” x 10.0” x 4.75” (127mm x 254mm x 121mm)

5.0” x 10.0” x 5.61” (127mm x 254mm x 143mm) Including rough-in box:

Shipping Weight for K-1900-8-IP and K-1900-8-IP-EWP: 5.3 lbs (2.4 kg)

Shipping Weight for K-1900-812L-IP and K-190012L8IPEWP: 5.3 lbs (2.4 kg)

Operating Temperature: -40°F to 140°F (-40° C to 60° C)

Humidity - Standard Models: 5% to 95% non-condensing

Humidity - EWP Models: Up to 100%

Handset Cable Length on K-1900-812L-IP and K-1900812LIPEWP Models: 12” to 12.7” (31 cm to 33 cm)

Handset Cable Length on K-1900-8-IP Model: 34” to 37” (86 cm to 94 cm)

Handset Cable Length on K-1900-8-IP-EWP Model: 52” to 57” (132 cm to 145 cm)

Audio Codecs: G711u, G711a, G722

Network Compliance: IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over

Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A

Connections: (1) RJ45 10/100 Base-T, (14) gel-filled butt connectors

Definitions

Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.

DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and

assigns an IP address to allow the client to communicate with other devices on the network.

DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.

Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires toLAN

achieve transmission speeds up to 1Gbps.

Host: A computer or device connected to a network.

Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various

forms of network communication.

Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses

to hosts or vice versa.

Internet: A worldwide system of computer networks running on protocol which can be accessed by individual computers or networks.IP

IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the

Internet.

IP Address: This is the address that uniquely identifies a host on a network.

LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.

Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of

time, the lease can expire and the address can be assigned to another host.

MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique

address assigned to a device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct

IP address. You can find the MAC address of your K-1900-8-IP phone printed on a white label on the top surface of the PoE LAN port.

Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at IP

Address, and Subnet Mask. MAC Address

RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission

of multimedia data over either unicast or multicast network services.

Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the

client.

Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions

such as voice and video calls over Internet Protocol ( ) networks. The protocol defines the messages that are sent between endpoints,IP

which govern establishment, termination and other essential elements of a call.

Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the

Lease limitations of a Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1

Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices

whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the

same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet

mask.

TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet.

TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the

Internet, making it the de facto standard for transmitting data over networks.

TISP: Telephone Internet Service Provider

WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the

Internet.

Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The

AP usually connects to a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.

Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to

create a second network. When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance

is too long for a direct connection to be established, a wireless repeater is used to bridge the gap.

Specyfikacje produktu

Marka:	Viking
Kategoria:	Interkom
Model:	K-1900-8-IP-EWP

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Viking K-1900-8-IP-EWP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Interkom Viking

Viking K-1900-712L-EWP Instrukcja

9 Października 2024

Viking K-1700-3 Instrukcja

9 Października 2024

Viking E-50-SS Instrukcja

9 Października 2024

Viking E-50-WH Instrukcja

9 Października 2024

Viking K-1700-IP-EWP Instrukcja

9 Października 2024

Viking E-60-BN Instrukcja

9 Października 2024

Viking E-1600-53-IP Instrukcja

9 Października 2024

Viking E-60-WH Instrukcja

9 Października 2024

Viking K-1900-8-IP-EWP Instrukcja

9 Października 2024

Viking W-2000A Instrukcja

9 Października 2024

Instrukcje Interkom

Najnowsze instrukcje dla Interkom

FlyingVoice i86V-01 Instrukcja

9 Października 2024

Valcom V-1072B Instrukcja

8 Października 2024

Valcom V-1074 Instrukcja

8 Października 2024

Valcom V-2972 Instrukcja

8 Października 2024

Valcom V-9953 Instrukcja

8 Października 2024

Valcom V-TR96 Instrukcja

8 Października 2024

Valcom V-5324004 Instrukcja

8 Października 2024

Valcom V-9908 Instrukcja

8 Października 2024

Valcom V-9923B Instrukcja

8 Października 2024

Valcom V-1096 Instrukcja

8 Października 2024