Instrukcja obsługi Viking K-1900-712L-IP
Viking
Intercomsysteem
K-1900-712L-IP
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viking K-1900-712L-IP (21 stron) w kategorii Intercomsysteem. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/21
Applications
The K-1900-7-IP Series VoIP Panel Phones will auto-dial a 1-20 digit programmable phone
number each time the handset is lifted. If the call is not answered, the phone will dial up to 3
additional phone numbers. The phones are designed to provide quick andK-1900-7-IP Series
reliable communication for SIP VoIP phone systems with PoE. The unit can be programmed
from any PC on the same LAN or remotely using a Static IP Address.
When a call initiated by the phone is answered by an apartment orK-1900-7-IP Series
business tenant, a built-in relay may be activated to control an electric gate or door strike. The
relay can also be programmed to activate whenever the phone is off hook, ideal for controlling
cameras, etc.
The K-1900-712L-IP and K-1900712LIPEWP features a 12” long armored cable with internal
stainless steel lanyard for additional cable strength.
The andK-1900-7-IP-EWP K-1900712LIPEWP share all the features of the standard
K- -7-1900 IP and K-1900-712L-IP in addition to Enhanced Weather Protection (EWP) for
outdoor installations where the unit is exposed to precipitation or condensation. EWP products
are designed to meet IP66 standards and may feature foam rubber gaskets, sealed
connections, gel-filled butt connectors, as well as potted circuit boards with internally sealed,
field-adjustable trim pots and DIP switches for easy on-site programming. For more information
on EWP, see .DOD 859
• Commercial or Residential
Door / Gate Entrance
• Kiosk Phone
• Apartment Entry Phone
• Door Entry Phone
• Courtesy Assistance Phone
• Customer Service Phone
• Automated Teller (ATM) Phone
• Security or Emergency Phone
• Hot-Line Phone
• Prison Phone
Vandal Resistant VoIP Panel Phones
with Auto Dialer and Relay Control
Features
Installation requires a Network Administrator / IT Technician
!
Specifications
www.VikingElectronics.com
Information: 715-386-8861
• Vandal Resistant Features: 12 gauge (0.105” thick) 316 stainless steel front
panel with permanent laser etched graphics. Heavy duty metal hook switch,
armored cable and T-10 Security Torx drive mounting screws.
• Marine grade 316 stainless steel faceplate Weather Resistant Features:
and Torx Security screws. Faceplate, ear piece, and mouth piece gaskets (on
EWP models).
• Ring with adjustable volume and cadence
• Hearing aid compatible amplified handset with sealed push button volume
control
• SPDT 2 Amp relay contacts for door/gate or camera control
• Optional for Secure Remote Relay Control, see RC-4A DOD 582
• SIP compliant (see page 2 for compatible SIP servers and IP phone systems)
• PoE powered (class 1, <4 Watts)
• Outbound Proxy, Authentication ID, Peer to Peer, VLAN Tagging
• Network downloadable firmware
• and : 12” armored handset cableK-1900-712L-IP K-1900712LIPEWP
• : 36” armored handset cable K-1900-7-IP
• : 54” armored handset cable K-1900-7-IP-EWP
• Cycles to up to three rollover phone numbers on busy or no-answer
• Optional Enhanced Weather Protection (EWP) available - EWP products are
designed to meet IP66 Ingress Protection Rating, see DOD 859
• Remotely programmable
• Extended temperature range (-40°F to 140°F)
• Selectable auto-answer feature for monitoring
• Flush mount using a standard double-gang box (not included)
• Surface mount using an optional surface mount box (not included, VE-5x10
see ) DOD 424
• Optional kit to illuminate the front panel at night, see VE-LIGHT DOD 428
• Diagnostics (for testing relay)
For complete , see page 2.Specifications
K-1900-7-IP-EWP
with 54” armored
cable
K-1900-7-IP
with 36”
armored cable
K-1900-712L-IP/
K-1900712LIPEWP
with 12” armored
cable and lanyard
PRODUCT
MANUAL
Designed, Manufactured and Supported in the USA K-1900-7-IP Series
VoIP Panel Phone with
Auto Dialer and Relay Control
September 28, 2021
SECURITY & COMMUNICATION
VIKING
2
VoIP SIP System Compatibility
For compatibility and vendor specific detailed configuration instructions, see the Viking VoIP
SIP System Compatibility List, DOD 944. To open and download this PDF file:
1. Go to www.vikingelectronics.com
and enter in the search box 944
2. Click Application Note (DOD 944)
to open and download the PDF
Scan the QR code below to open
and download the Viking VoIP
SIP System Compatibility List - OR -
Important: Exclusion from this list means only that compatibility has not been verified, it does not mean
incompatibility. If you have questions, please call Viking Electronics at 715-386-8861.
Power: PoE class 1 (<4 Watts)
Standard Dimensions: 5.0” x 10.0” x 4.97” (127mm x 254mm x 126mm)
EWP Dimensions: 5.0” x 10.0” x 5.1” (127mm x 254mm x 130mm)
Shipping Weight for K-1900-712L-IP/EWP: 3.7 lbs (1.7 kg)
Shipping Weight for K-1900-7-IP/EWP: 3.8 lbs (1.72 kg)
Operating Temperature: -40°F to 140°F (-40° C to 60° C)
Humidity - Standard Products: 5% to 95% non-condensing
Humidity - EWP Products: Up to 100%
Handset Cable Length on K-1900-712L-IP and K-1900712LIPEWP Models: 12” to 12.7” (31cm to 33 cm)
Handset Cable Length on K-1900-7-IP Model: 34” to 37” (86 cm to 94 cm)
Handset Cable Length on K-1900-7-IP-EWP Model: 52” to 57” (132 cm to 145 cm)
Audio Codecs: G711u, G711a, G722
Network Compliance:
IEEE 802.3 af PoE, SIP 2.0 RFC3261, 100BASE-TX with auto cross over
Regulatory Compliance: CE, FCC Part 15 and Canada ICES-003 Class A
Connections: (1) RJ45 10/100 Base-T, (3) gel-filled butt connectors
Specifications
3
Definitions
Client: A computer or device that makes use of a server. As an example, the client might request a particular file from the server.
DHCP: Dynamic Host Configuration Protocol. In this procedure the network server or router takes note of a client’s MAC address and
assigns an IP address to allow the client to communicate with other devices on the network.
DNS Server: A DNS (Domain Name System) server translates domain names (ie: www.vikingelectronics.com) into an IP address.
Ethernet: Ethernet is the most commonly used technology. An Ethernet Local Area Network typically uses twisted pair wires toLAN
achieve transmission speeds up to 1Gbps.
Host: A computer or device connected to a network.
Host Name: A host name is a label assigned to a device connected to a computer network that is used to identify the device in various
forms of network communication.
Hosts File: A file stored in a computer that lists host names and their corresponding IP addresses with the purpose of mapping addresses
to hosts or vice versa.
Internet: A worldwide system of computer networks running on protocol which can be accessed by individual computers or networks.IP
IP: Internet Protocol is the set of communications conventions that govern the way computers communicate on networks and on the
Internet.
IP Address: This is the address that uniquely identifies a host on a network.
LAN: Local Area Network. A LAN is a network connecting computers and other devices within an office or building.
Lease: The amount of time a DHCP server reserves an address it has assigned. If the address isn’t used by the host for a period of
time, the lease can expire and the address can be assigned to another host.
MAC Address: MAC stands for Media Access Control. A MAC address, also called a hardware address or physical address, is a unique
address assigned to a device at the factory. It resides in the device’s memory and is used by routers to send network traffic to the correct
IP address. You can find the MAC address of your K-1900-7-IP Series phone printed on a white label on the top surface of the PoE LAN
port.
Router: A device that forwards data from one network to another. In order to send information to the right location, routers look at IP
Address, and Subnet Mask. MAC Address
RTP: Real-Time Transport Protocol is an Internet protocol standard that specifies a way for programs to manage the real-time transmission
of multimedia data over either unicast or multicast network services.
Server: A computer or device that fulfills requests from a client. This could involve the server sending a particular file requested by the
client.
Session Initiation Protocol (SIP): Is a signaling communications protocol, widely used for controlling multimedia communication sessions
such as voice and video calls over Internet Protocol ( ) networks. The protocol defines the messages that are sent between endpoints,IP
which govern establishment, termination and other essential elements of a call.
Static IP Address: A static IP Address has been assigned manually and is permanent until it is manually removed. It is not subject to the
Lease limitations of a Dynamic IP Address assigned by the DHCP Server. The default static IP Address is: 192.168.154.1
Subnet: A portion of a network that shares a common address component. On TCP/IP networks, subnets are defined as all devices
whose IP addresses have the same prefix. For example, all devices with IP addresses that start with 100.100.100. would be part of the
same subnet. Dividing a network into subnets is useful for both security and performance reasons. IP networks are divided using a subnet
mask.
TCP/IP: Transmission Control Protocol/Internet Protocol is the suite of communications protocols used to connect hosts on the Internet.
TCP/IP uses several protocols, the two main ones being TCP and IP. TCP/IP is built into the UNIX operating system and is used by the
Internet, making it the de facto standard for transmitting data over networks.
TISP: Telephone Internet Service Provider
WAN: Wide Area Network. A WAN is a network comprising a large geographical area like a state or country. The largest WAN is the
Internet.
Wireless Access Point (AP): A device that allows wireless devices to connect to a wired network using Wi-Fi, or related standards. The
AP usually connects to a router (via a wired network) as a standalone device, but it can also be an integral component of the router itself.
Wireless Repeater (Wireless Range Extender): takes an existing signal from a wireless router or access point and rebroadcasts it to
create a second network. When two or more hosts have to be connected with one another over the IEEE 802.11 protocol and the distance
is too long for a direct connection to be established, a wireless repeater is used to bridge the gap.
Specyfikacje produktu
| Marka: | Viking |
| Kategoria: | Intercomsysteem |
| Model: | K-1900-712L-IP |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Viking K-1900-712L-IP, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Intercomsysteem Viking
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
Instrukcje Intercomsysteem
- Intercomsysteem Hikvision
- Intercomsysteem Panasonic
- Intercomsysteem Alcatel
- Intercomsysteem Vimar
- Intercomsysteem Dahua Technology
- Intercomsysteem Emos
- Intercomsysteem DiO
- Intercomsysteem DataVideo
- Intercomsysteem EtiamPro
- Intercomsysteem Planet
- Intercomsysteem Elro
- Intercomsysteem ZKTeco
- Intercomsysteem Akuvox
- Intercomsysteem Busch-Jaeger
- Intercomsysteem Fibaro
- Intercomsysteem Avidsen
- Intercomsysteem TOA
- Intercomsysteem Byron
- Intercomsysteem M-e
- Intercomsysteem Smartwares
- Intercomsysteem WHD
- Intercomsysteem Siedle
- Intercomsysteem Valcom
- Intercomsysteem Chacon
- Intercomsysteem Konig
- Intercomsysteem DoorBird
- Intercomsysteem Gira
- Intercomsysteem Russound
- Intercomsysteem Comelit
- Intercomsysteem Aiphone
- Intercomsysteem RTS
- Intercomsysteem CyberData Systems
- Intercomsysteem GEV
- Intercomsysteem FlyingVoice
- Intercomsysteem Vibell
Najnowsze instrukcje dla Intercomsysteem
9 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024