Instrukcja obsługi Viewsonic PJD7583wi

Viewsonic projektor wideo PJD7583wi

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viewsonic PJD7583wi (95 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/95

IMPORTANT: Please read this User Guide to obtain important

information on installing and using your product in a safe

manner, as well as registering your product for future service.

Warranty information contained in this User Guide will describe

your limited coverage from ViewSonic Corporation, which is also

found on our web site at http://www.viewsonic.com in English,

or in specic languages using the Regional selection box in the

upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las

instrucciones en este manual”

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

- Podręcznik użytkownika

- Pyководство пользователя

- Kullanιcι kιlavuzu

- 使用手冊(繁中)

- 使用手冊 (簡中)

- 사용자 안내서

PJD7383/ PJD7383i

PJD7583w/PJD7583wi

DLP Projector

ViewSonic®

Model No. : VS13339

VS13340

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses, and can

radiate radio frequency energy, and if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no guarantee that interference

will not occur in a particular installation. If this equipment does cause harmful interference to radio

or television reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the party

responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive

2006/95/EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent or

discarded batteries or accumulators as unsorted municipal waste, but use the return and

collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of

more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

Industry Canada Notice

This wireless module device complies with Canadian RSS-210.To prevent radio interference to the

licensed service, this device is intended to be operated indoors and away from windows to provide

maximum shielding. Equipment (or its transmitting antenna) that is installed outdoors is subject to

licensing. The installer of this radio equipment must ensure that the antenna is located or pointed such

that it does not emit RF eld in excess of Health Canada limits for the general population; consult

Safety Code 6, obtainable from Health Canada’s web site www.hc-sc.gc.ca/rpb.

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this unit near water.

6. Clean with a soft, dry cloth.

7. Do not block any ventilation openings. Install the unit in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other

devices (including ampliers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized

plug has two blades with one wider than the other. A grounding type plug has two

blades and a third grounding prong. The wide blade and the third prong are provided

for your safety. If the provided plug does not t into your outlet, consult an electrician

for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs.

Convenience receptacles and the point where they exit from the unit. Be sure that the

power outlet is located near the unit so that it is easily accessible.

11. Only use attachments/accessories specied by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specied by the

manufacturer, or sold with the unit. When a cart is used, use caution when

moving the cart/unit combination to avoid injury from tipping over.

13. Unplug this unit when unused for long periods of time.

14. Refer all servicing to qualied service personnel. Servicing is required when the unit

has been damaged in any way, such as: if the power-supply cord or plug is damaged,

if liquid is spilled onto or objects fall into the unit, if the unit is exposed to rain or

moisture, or if the unit does not operate normally or has been dropped.

Specyfikacje produktu

Marka:	Viewsonic
Kategoria:	projektor wideo
Model:	PJD7583wi
Kolor produktu:	Czarny
Waga produktu:	3500 g
W zestawie pilot zdalnego sterowania:	Tak
Technologia łączności:	Przewodowa
Poziom hałasu:	32 dB
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	10 W
Certyfikaty:	CB, UL, cUL, FCC (including ICES-003), CE, UL-Argentina, NOM, TUV-GS, GOST-R, SASO, Ukraine, PSB, C-Tick, Korean-eK, CCC, Hygiene, WEEE, RoHS
Ilość portów Ethernet LAN (RJ-45):	1
Współczynnik kontrastu (typowy):	2000:1
Możliwość przybliżenia:	Nie
Wi-Fi:	Nie
Pobór mocy w trybie czuwania:	1 W
Wejscie Audio (L,P):	1
Liczba portów USB 2.0:	1
Przewodowa sieć LAN:	Tak
Kompatybilność 3D:	Tak
Pobór mocy:	296 W
Waga wraz z opakowaniem:	6000 g
Mikrofon:	Tak
Port RS-232:	1
Wymiary produktu (SxGxW):	290 x 254 x 126 mm
Pozycjonowanie na rynku:	Prezentacja
Liczba portów VGA (D-Sub):	3
Wejście audio:	Tak
Wymiary opakowania (SxGxW):	355 x 228 x 415 mm
Ilość wbudowanych glosników:	1
Długość ogniskowa:	- mm
Złożone wejście wideo:	1
Port DVI:	Nie
Pełny HD:	Tak
System formatu sygnału analogowego:	NTSC M, PAL, SECAM
Ostrość:	Ręczny
Format obrazu:	16:10
Wyjście audio:	Tak
Interfejs SCSI:	RS-232
Jasność projektora:	3000 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	XGA (1024x768)
Odległość projekcji:	0.32 - 3.16 m
Kompatybilność rozmiaru ekranu:	30 - 300 "
Rodzaj źródła światła:	Lampa
Moc lampy:	210 W
Żywotność źródła światła:	4000 h
Żywotność źródła światła (tryb ekonomiczny):	6000 h
Wejście S-Video:	1
Ilość kolorów:	16.78 millionów kolorów
HD-Ready:	Tak