Instrukcja obsługi Viewsonic PJD5122

Viewsonic projektor wideo PJD5122

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viewsonic PJD5122 (69 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/69

ViewSonic®

IMPORTANT: Please read this User Guide to obtain important information on install-

ing and using your product in a safe manner, as well as registering your product for

future service. Warranty information contained in this User Guide will describe your

limited coverage from ViewSonic Corporation, which is a lso found on our web site

at http://www.viewsonic.com in English, or in specic languages using the Regional

selection box in the upper right corner of our website.

“Antes de operar su equipo lea cuidadosamente las instrucciones en este manual”

Model No. : VS13304/VS13305

VS13306/VS13308

PJD5211/PJD5221/

PJD5231/PJD5122

DLP Projector

- User Guide

- Guide de l’utilisateur

- Bedienungsanleitung

- Guía del usuario

- Guida dell’utente

- Guia do usuário

- Användarhandbok

- Käyttöopas

- Руководство пользователя

- 使用手冊 (繁體)

- 使用手冊 (簡體)

- 사용자 안내서

- Podręcznik użytkownika

- Kullanιcι kιlavuzu

Compliance Information

FCC Statement

This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment generates, uses, and can radiate radio

frequency energy, and if not installed and used in accordance with the instructions, may cause harmful

interference to radio communications. However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: You are cautioned that changes or modications not expressly approved by the

party responsible for compliance could void your authority to operate the equipment.

For Canada

• This Class B digital apparatus complies with Canadian ICES-003.

• Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

CE Conformity for European Countries

The device complies with the EMC Directive 2004/108/EC and Low Voltage Directive

2006/95/EC.

Following information is only for EU-member states:

The mark is in compliance with the Waste Electrical and Electronic Equipment Directive

2002/96/EC (WEEE).

The mark indicates the requirement NOT to dispose the equipment including any spent or

discarded batteries or accumulators as unsorted municipal waste, but use the return and

collection systems available.

If the batteries, accumulators and button cells included with this equipment, display the

chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of

more than 0.0005% Mercury or more than, 0.002% Cadmium, or more than 0.004% Lead.

Declaration of RoHS Compliance

This product has been designed and manufactured in compliance with Directive 2002/95/EC of the

European Parliament and the Council on restriction of the use of certain hazardous substances in

electrical and electronic equipment (RoHS Directive) and is deemed to comply with the maximum

concentration values issued by the European Technical Adaptation Committee (TAC) as shown below:

Substance Proposed Maximum

Concentration Actual Concentration

Lead (Pb) 0.1% < 0.1%

Mercury (Hg) 0.1% < 0.1%

Cadmium (Cd) 0.01% < 0.01%

Hexavalent Chromium (Cr6+) 0.1% < 0.1%

Polybrominated biphenyls (PBB) 0.1% < 0.1%

Polybrominated diphenyl ethers (PBDE) 0.1% < 0.1%

Certain components of products as stated above are exempted under the Annex of the RoHS Directives

as noted below:

Examples of exempted components are:

1. Mercury in compact uorescent lamps not exceeding 5 mg per lamp and in other lamps not

specically mentioned in the Annex of RoHS Directive.

2. Lead in glass of cathode ray tubes, electronic components, uorescent tubes, and electronic ceramic

parts (e.g. piezoelectronic devices).

3. Lead in high temperature type solders (i.e. lead-based alloys containing 85% by weight or more lead).

4. Lead as an allotting element in steel containing up to 0.35% lead by weight, aluminium containing up

to 0.4% lead by weight and as a cooper alloy containing up to 4% lead by weight.

Specyfikacje produktu

Marka:	Viewsonic
Kategoria:	projektor wideo
Model:	PJD5122
Kolor produktu:	Czarny
Waga produktu:	2300 g
W zestawie pilot zdalnego sterowania:	Tak
Technologia łączności:	Przewodowa
Poziom hałasu:	32 dB
Wbudowane głośniki:	Tak
Moc wyjściowa (RMS):	5 W
Certyfikaty:	CB, RoHS, WEEE, UL/cUL, FCC-B, ICES-003, IRAM, NOM, PSB, C-tick, EK, CE, TUV/GS, GOST-R, SASO UKrSEPRO, CCC
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	10 - 90 %
Rozdzielczość:	1280 x 1024 px
Współczynnik kontrastu (typowy):	2000:1
Wi-Fi:	Nie
Przewody:	VGA
Pobór mocy w trybie czuwania:	1 W
Przewodowa sieć LAN:	Nie
Kompatybilność 3D:	Tak
Pobór mocy:	280 W
Port RS-232:	1
Wymiary produktu (SxGxW):	264 x 225 x 96.4 mm
Zasilanie:	100 - 240 V, 50/60 Hz
Pozycjonowanie na rynku:	Prezentacja
Liczba portów VGA (D-Sub):	3
Wejście audio:	1
Wyście mocy ac:	Tak
Wymiary opakowania (SxGxW):	350 x 285 x 205 mm
Ilość wbudowanych glosników:	1
Dopuszczalna wysokość podczas eksploatacji (n.p.m.):	1.8 - 3048 m
Długość ogniskowa:	- mm
Zasięg skanowania w poziomie:	31 - 100 kHz
Zasięg skanowania (długość):	48 - 120 Hz
Wejście komponentu wideo (ypbpr/ycbcr):	2
Złożone wejście wideo:	1
Port DVI:	Nie
Waga (imperialna):	5.1 funtów
Pełny HD:	Nie
System formatu sygnału analogowego:	SECAM
Ostrość:	Ręczny
Format obrazu:	4:3, 16:9
Wyjście audio:	1
Interfejs SCSI:	RS-232
Jasność projektora:	2700 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	SVGA (800x600)
Korekcja Keystone'a, poziom:	± 40 °
Jednorodność:	85 %
Odległość projekcji:	1.2 - 11.3 m
Kompatybilność rozmiaru ekranu:	30 - 300 "
Rodzaj źródła światła:	Lampa
Moc lampy:	220 W
Żywotność źródła światła:	4000 h
Żywotność źródła światła (tryb ekonomiczny):	6000 h
Wejście S-Video:	1
Poziom hałasu (tryp ekonomiczn):	26 dB
HD-Ready:	Tak