Instrukcja obsługi Viewsonic PJ656


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Viewsonic PJ656 (59 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 38 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/59
PJ656
LCD Projector
ViewSonic®
iViewSonic PJ656
Compliance Information
For U.S.A.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) The device may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy, and if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio
or television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
Consult the dealer or an experienced radio/TV technician for help.
FCC Warning
To assure continued FCC compliance, the user must use grounded power supply cord and the cables
which are included with the equipment or specified. Also, any unauthorized changes or modifications
not expressly approved by the party responsible for compliance could void the users authority to
operate this device.
For Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
For European Countries
CE Conformity
The device complies with the requirements of the EEC directive 89/336/EEC as
amended by 92/31/EEC and 93/68/EEC Art.5 with regard to “Electromagnetic
compaty”, and 73/23/EEC as amended by 93/68/EEC Art.13 with regard to “Safety.”
User Information for all Countries
Notice: Use the cables which are included with the unit or specified.
iiViewSonic PJ656
Important Safety Instructions
1. Read these instructions completely before using the equipment.
2. Keep these instructions in a safe place.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this equipment near water.
6. Clean with a soft, dry cloth. If further cleaning is required, see “Cleaning the Display” in this
guide for further instructions.
7. Do not block any ventilation openings. Install the equipment in accordance with the
manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices
(including amplifiers) that produce heat.
9. Do not attempt to circumvent the safety provisions of the polarized or grounding-type plug.
A polarized plug has two blades with one wider than the other. A grounding type plug has two
blades and a third grounding prong. The wide blade and the third prong are provided for your
safety. If the plug does not fit into your outlet, consult an electrician for replacement of the
outlet.
10. Protect the power cord from being tread upon or pinched, particularly at the plug, and the
point where if emerges from the equipment. Be sure that the power outlet is located near the
equipment so that it is easily accessible.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or
sold with the equipment. When a cart is used, use caution when moving the cart/equipment
combination to avoid injury from tipping over.
13.
Unplug this equipment when it will be unused for long periods of time.
14. Refer all servicing to qualified service personnel. Service is required when the unit has been
damaged in any way, such as: if the power-supply cord or plug is damaged, if liquid is spilled
onto or objects fall into the unit, if the unit is exposed to rain or moisture, or if the unit does not
operate normally or has been dropped.


Specyfikacje produktu

Marka: Viewsonic
Kategoria: projektor wideo
Model: PJ656
Waga produktu: 2800 g
Poziom hałasu: 38 dB
Zakres temperatur (eksploatacja): 5 - 35 °C
Zakres wilgotności względnej: 10 - 85 %
Rozdzielczość: 1600 x 1200 px
Współczynnik kontrastu (typowy): 400:1
Pobór mocy: 290 W
Typ lamp: UHB
Wymiary produktu (SxGxW): 306 x 249 x 97 mm
Zasilanie: AC 100 - 120 / 200 - 240 V, 50 / 60Hz
Pozycjonowanie na rynku: Przenośny
Wejście audio: 3.5mm stereo mini jack
Ilość wbudowanych glosników: 1
Cyfrowe zbliżenie: 1.2 x
Zasięg skanowania w poziomie: 31 - 106 kHz
Zasięg skanowania (długość): 56 - 120 Hz
Inne połączenia: RGB-PC In(15-pin mini D-sub (x2)) / Out(15-pin mini D-sub), RCA jack (set), USB, 9-pin D-sub RS-232
Ostrość: Ręczny
Format obrazu: 4:3
Wyjście audio: 3.5mm stereo mini jack
System soczewki: F1.7 - 1.9, f=18.9 - 22.6
Jasność projektora: 2100 ANSI lumenów
Technologia projekcji: LCD
Naturalna rozdzielczość projektora: XGA (1024x768)
Rodzaj źródła światła: Lampa
Moc lampy: 180 W
Stosunek padania: 1.5 - 1.8:1
Interfejs do nagrywania wideo: RCA jack
Technologia korekcji zniekształcenia trapezowego: ± 15°

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Viewsonic PJ656, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje projektor wideo Viewsonic

Instrukcje projektor wideo

Najnowsze instrukcje dla projektor wideo