Instrukcja obsługi Ventus W382
Ventus
Stacje pogodowe
W382
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Ventus W382 (20 stron) w kategorii Stacje pogodowe. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/20
INSTRUCTION MANUAL OF K0382
Wireless Indoor and Outdoor Thermometer- Clock with Weather Station
QUICK START
1. Slide open the battery cover at the back of your wireless thermometer-clock.
2. Insert 2 x AAA batteries into the battery compartment by observing the correct + / -
polarity signs inside the battery compartment.
3. Replace the battery cover. In few seconds the LCD shows the default time, calendar
and the current indoor temperature and it starts to search for outdoor temperature
signal.
4. Then insert 2 x AAA batteries into the outdoor sensor. The outdoor temperature will
be displayed with “CH1” shown on the lower line of the LCD. Your Thermometer-
clock will be synchronized with outdoor sensor at Channel 1, the outdoor
temperature will be displayed.
Remarks:
Keep in mind that your outdoor sensor has a 100-feet open air transmission with no
1
obstructions. Actual transmission range will vary depending on what is in the path of the signal.
Each obstruction (roof, walls, floors, ceilings, thick trees, etc.) will effectively cut signal range in
half.
TO SET CALENDAR, 12/24 TIME AND TIME
1. Press and hold SET / ALM SET for 2 seconds, time digits change to year “2008 YR”
and flash. Press + / - to set year.
2. Then press SET / ALM SET once again, month digits flash. Press +/- button to set
month.
3. Then press SET / ALM SET once again, date digits flash. Press +/- button to set
date.
4. Press SET / ALM SET once again, time digits change “24 Hr”, press +/- to select “12
Hr” time format or “24 Hr” time format. When “12 Hr” is selected, AM / PM icon will
be displayed.
5. Then press SET / ALM SET once again, time digits “0:00” show up and the hour
digits flash. Press +/- to set the hours.
6. Then press SET / ALM SET once again, minute digits flash. Press +/- button to set
the minutes.
7. Press SET / ALM SET to return to normal mode, or it will return to normal mode in
around 8 seconds if no press of any other buttons.
TO SET ALARM TIME
Press SET / ALM SET once, time digits change to alarm time digits “AM 7:00 AL”. Then press
and hold SET / ALM SET for 2 seconds, the hour digits flash. Press +/- to set your desired
hours of alarm time.
Press SET / ALM SET again, alarm minute digits flash. Press +/- to set alarm minutes.
Press SET / ALM SET again, time digits change to “05” and flash. Press +/- to set the snooze
duration from 1 to 20 minutes.
Press SET / ALM SET to return to normal mode, or it will return to normal mode in around 30
seconds if no further press of any other buttons.
TO TURN ON OR OFF YOUR ALARM
Press SET / ALM SET once to display the alarm time. When alarm time is displayed, press + to
turn on / off the daily alarm. When the alarm function is turned on, the icon appears
between the hour and minute digits.
TO USE SNOOZE ALARM
When time reaches your set alarm time, your clock will give beep sound to wake you up. The
icon will flash.
1) Press SNOOZE once to stop the alarm temporarily, the icon keeps flashing. The
alarm will beep again in 5 minutes.
2
2) To stop the alarm, press + / CHANNEL (ALM On-Off) once, the alarm beep will stop
and the “Bell” icon become static, alarm will beep again same time next day.
Alarm Duration: 2 minutes
TO DISPLAY TEMPERATURE IN DEGREE C OR F
Simply press – (°C/°F) to display temperature in degree C or degree F.
To Read the Maximum-Minimum Temperature Records
Press MAX/MIN at the back once to view the indoor-outdoor maximum or minimum
temperatures.
When the maximum indoor-outdoor temperatures are displayed, press and hold the MAX will
clear the maximums and the unit will start to record and display fresh data again.
When the minimum indoor-outdoor temperature and humidity are displayed, press and hold the
MIN will clear the minimums and the unit will start to record and display fresh data again.
TO USE THE WEATHER STATION
There are four types of weather display in your weather station:
SUNNY
SUNNY AND CLOUDY
CLOUDY
RAINY
Remarks: for better use of your weather station, place it at a location with open air circulation
e.g. close by an open window. Placing it at air-conditioned environment will affect its accuracy.
After your weather station is powered up, it will take around 24 hours to get stable. The
weather icons on the display give a reference to the next 6-12 hours weather conditions. It may
not match with the current weather condition outside.
TO SYNCHRONIZE YOUR CLOCK WITH MULTIPLE OUTDOOR SENSORS
Your wireless thermometer-clock is equipped with one outdoor sensor. You could purchase
second or third outdoor sensor to work with this thermometer-clock at the same time.
3
Specyfikacje produktu
| Marka: | Ventus |
| Kategoria: | Stacje pogodowe |
| Model: | W382 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Ventus W382, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Stacje pogodowe Ventus
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
2 Lipca 2024
Instrukcje Stacje pogodowe
- Stacje pogodowe Livoo
- Stacje pogodowe Hyundai
- Stacje pogodowe Viking
- Stacje pogodowe TFA
- Stacje pogodowe Auriol
- Stacje pogodowe Techno Line
- Stacje pogodowe Emos
- Stacje pogodowe Hama
- Stacje pogodowe Denver
- Stacje pogodowe Trevi
- Stacje pogodowe Alecto
- Stacje pogodowe Cotech
- Stacje pogodowe Oregon
- Stacje pogodowe Cresta
- Stacje pogodowe AcuRite
- Stacje pogodowe Technoline
- Stacje pogodowe Irox
- Stacje pogodowe UPM
- Stacje pogodowe Kemot
- Stacje pogodowe La Crosse
- Stacje pogodowe Meade
- Stacje pogodowe Prologue
Najnowsze instrukcje dla Stacje pogodowe
15 Października 2024
15 Października 2024
14 Października 2024
13 Października 2024
13 Października 2024
13 Października 2024
13 Października 2024
12 Października 2024
11 Października 2024
10 Października 2024