Instrukcja obsługi Vemer Energy-230 LC
Vemer
Meetapparatuur
Energy-230 LC
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vemer Energy-230 LC (1 stron) w kategorii Meetapparatuur. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
User Manual
SINGLE-PHASE ACTIVE ENERGY METER
Read all the instructions carefully
V3IS00417-010-082010
Mod. Energy-230 LC
The Energy-230 LC static energy meter is an appliance to read active energy in single-phase
230V systems. It is designed to operate in environments with measurement category III and
pollution level 2 according to EN 61010-1 standard.
SAFETY WARNINGS
To guarantee correct installation, proceed as follows:
1) The appliance should be installed by a qualified operator
2) The appliance should be installed in a panel in such a way as to guarantee that the
terminals are inaccessible after fitting
3) A protection device against over-currents should be installed in the electrical system,
upstream of the energy meter
4) Connect the instrument as shown in the alongside diagrams
5) Before touching the connector terminals make sure that the wires to be connected or
already connected to the instrument are not live
6) Do not power or connect the instrument if any part of it is damaged
8) The instrument must be installed and activated in compliance with current electric
systems standards.
Code Model Description
VN960100 Energy-230 LC Single-phase active energy meter
TECHNICAL SPECIFICATIONS
• Power supply: 230 V CA (-15%/+10%), 50/60 Hz
• Maximum power consumption: 4 VA
• Basic current: I = 15Ab
• Maximum current: I MAX = 22,5 A
• Starting current: ) 50 mA
• Current circuit consumption: < 2 VA
• Operating temperature: -10 ÷ +45 °C
• Storage temperature: -20 ÷ +60 °C
• Relative humidity: 10% ÷ 90% non-condensing
• Connection type: direct for current conductors
• Signaling leds: green = power on
red = flashing at 10Wh
• Accuracy: class 2 (EN 62053-21)
• Display: 6-digit mechanical counter
• Reading resolution: 0,1 kWh (full scale: 99999,9 kWh)
• Housing: 2 DIN, gray RAL 7035
• Protection degree: IP20/IP51 on the front
OPERATION
• In normal operation, the led is on and red led flashes in proportion to the green the
active power (flashing at 10Wh).
The meter counts the consumption of active power with a resolution of 0,1 kWh.
PHASE ERROR
• When the energy meter is turned on, a connection check-up is automatically carried out
to detect any connection errors: in case of improper connection, the and leds red green
flash alternate and the meter is locked.
Warning: to restore correct meter operation after an error reading has been
showed, switch the meter off, invert connections of voltage or current
and turn on again.
REFERENCE STANDARS
Conformity to EU directives:
2006/95/EC (Low Voltage)
2004/108/EC (EMC)
is declared with reference to the following harmonised standards:
EN 61010-1 EN 62053-21and
Dimensions
Connection
Description
(OHFWULFDOORDG
0D[$
9$&+]
7HUPLQDOEORFNIRUGLUHFW
FRQQHFWLRQRIPHWHULQJZLUHV
7RWDOHQHUJ\
*UHHQOHG
OLW SRZHURQ
5HGOHG
IODVK :K
Energy-230
kWh
15(22.5)A cl.2
230V~ 50/60Hz
ON 10Wh/imp
,
4
16000
Specyfikacje produktu
Marka: | Vemer |
Kategoria: | Meetapparatuur |
Model: | Energy-230 LC |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Vemer Energy-230 LC, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Meetapparatuur Vemer
26 Sierpnia 2024
18 Sierpnia 2024
13 Sierpnia 2024
6 Lipca 2024
5 Lipca 2024
5 Lipca 2024
3 Lipca 2024
Instrukcje Meetapparatuur
- Meetapparatuur Beurer
- Meetapparatuur Pioneer
- Meetapparatuur Voltcraft
- Meetapparatuur Black & Decker
- Meetapparatuur Silverline
- Meetapparatuur Testo
- Meetapparatuur TFA
- Meetapparatuur Chauvin Arnoux
- Meetapparatuur Uni-T
- Meetapparatuur Dahua Technology
- Meetapparatuur Techno Line
- Meetapparatuur Perel
- Meetapparatuur Trotec
- Meetapparatuur Velleman
- Meetapparatuur Güde
- Meetapparatuur Gossen Metrawatt
- Meetapparatuur Fluke
- Meetapparatuur Megger
- Meetapparatuur Greisinger
- Meetapparatuur Continental Edison
- Meetapparatuur TDE Instruments
- Meetapparatuur Bresser
- Meetapparatuur Omnitronic
- Meetapparatuur Eltako
- Meetapparatuur Hager
- Meetapparatuur Extech
- Meetapparatuur Testboy
- Meetapparatuur Kyoritsu
- Meetapparatuur Klein Tools
- Meetapparatuur Ridgid
- Meetapparatuur Lanaform
- Meetapparatuur Emko
- Meetapparatuur Powerfix
- Meetapparatuur ADE
- Meetapparatuur ProfiCare
- Meetapparatuur Amprobe
- Meetapparatuur Toolland
- Meetapparatuur Flir
- Meetapparatuur Finder
- Meetapparatuur Fantini Cosmi
- Meetapparatuur REV
- Meetapparatuur Peak
- Meetapparatuur X-Rite
- Meetapparatuur Tru Components
- Meetapparatuur Delta Ohm
- Meetapparatuur Hanna
- Meetapparatuur MGL Avionics
- Meetapparatuur UHoo
Najnowsze instrukcje dla Meetapparatuur
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024
17 Września 2024