Instrukcja obsługi Velleman CU2200

Velleman System kontroli dostępu CU2200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Velleman CU2200 (63 stron) w kategorii System kontroli dostępu. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/63
CU2200
WIRELESS SMS ALARM MESSENGER
DRAADLOZE SMS-ALARMMELDER
SYSTÈME DE MESSAGERIE D'ALARME SMS SANS FIL
SISTEMA DE ALARMA INALÁMBRICO POR MENSAJES SMS
DRAHTLOSER SMS-ALARM
USER MANUAL
GEBRUIKERSHANDLEIDING
NOTICE D’EMPLOI
MANUAL DEL USUARIO
BEDIENUNGSANLEITUNG
CU2200_v5 VELLEMAN 2
CU2200 – WIRELESS SMS ALARM MESSENGER
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle could harm
the environment. Do not dispose of the unit (or batteries) as unsorted municipal waste; it should be taken to a
specialized company for recycling. This device should be returned to your distributor or to a local recycling
service. Respect the local environmental rules.
If in doubt, contact your local waste disposal authorities.
Thank you for buying a VELLEMAN product! The CU2200 is equipped with a very reliable Siemens 16 bit MCU and can
be used for numerous applications (except for medical and aerospace applications) such as industrial equipment or
area monitoring, data capturing, home or car security… Please read the manual thoroughly before bringing this device
into service. If the device was damaged in transit, don't install or use it and contact your dealer.
2. Description
POW: 7~12VDC power input
GND: ground
AD1/AD2: N/A
IN1, IN3, IN4, IN5, IN6, IN7, IN8, GND: 12VDC alarm input, 7~15mA, common ground opto-coupled
IN2+, IN2-: 7~12VDC input
OUT1: relay output, max. 1A, 24VDC, 1A, 120VAC, NC/NO (selected by jumper on board)
3. Connection
Relay output jumper
1 2 3
▪ ▪ ▪
1-2 short NC
2-3 short NO (default)
CU2200_v5 VELLEMAN 3
Sound Monitoring
The CU2200 automatically picks up any phone call after eight rings. By connecting a microphone to the CU2200, you
will be able to hear all actions in the room.
4. Quick Setup
• Press the yellow button so as to eject the card caddy. Insert
the SIM card with the contacts facing down. Press the card
back into the CU2200.
• Connect the 12VDC power supply and wait until the red LED
turns on.
• Send following SMS message to the CU2200:
PWD:1234,STATUS%.
• Your mobile phone will receive an SMS reply within 30
seconds reporting the health status.
NOTE: The SIM card in the CU2200 must be activated by a
provider like a regular SIM card in a mobile phone. Make
sure to activate the caller ID service.
5. Alarm Response Time
The messenger will start the initialization after connection to the power supply. This procedure will take about 30
seconds.
In case of an alarm, the unit will send an SMS message to the control centre and to 4 pre-programmed phone
numbers. The control centre can be disabled in order for the phone numbers to receive the alarm message sooner.
6. GSM Network Connectivity
• If the GSM network is suddenly inaccessible or disconnected during the SMS sending, the message will be lost.
• When the CU2200 has failed to send the message due to an inaccessible network, the unit will search for the
network and keep sending the SMS when the network has been re-established.
• When failing to send SMS messages, the CU2200 will memorize up to 10 messages and send them as soon as
the network is re-established.
LED 1 – green status LED
Rapid flashing on/off
GSM module normal operation
Flashing on/off
GSM network connection problem
Reason:
Antenna not connected
No SIM card
Defective SIM card
Defective GSM module
LED 2 – red network LED
On
Normal operation
Flashing on/off
Searching GSM network
Connecting to network
Receiving SMS messages
Sending SMS messages
Phone dialling

Specyfikacje produktu

Marka: Velleman
Kategoria: System kontroli dostępu
Model: CU2200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Velleman CU2200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje System kontroli dostępu Velleman

Velleman

Velleman CU2200 Instrukcja

16 Sierpnia 2024
Velleman

Velleman MK179 Instrukcja

15 Sierpnia 2024
Velleman

Velleman HAMGSMGPS Instrukcja

13 Sierpnia 2024

Instrukcje System kontroli dostępu

Najnowsze instrukcje dla System kontroli dostępu

Hikvision

Hikvision DS-PK-L Instrukcja

13 Stycznia 2025
Abus

Abus BRIDGE One Instrukcja

5 Stycznia 2025
EQ-3

EQ-3 HM-LC-BL1-SM Instrukcja

29 Grudnia 2024
Abus

Abus FG500 HZ Instrukcja

22 Grudnia 2024
Vimar

Vimar 14470 Instrukcja

14 Grudnia 2024
Vimar

Vimar 14470.SL Instrukcja

14 Grudnia 2024
Vimar

Vimar ELVOX 80CN Instrukcja

14 Grudnia 2024
Vimar

Vimar ELVOX 80C3 Instrukcja

14 Grudnia 2024
Abus

Abus CodeLoxx Instrukcja

9 Grudnia 2024
Abus

Abus AE255F Instrukcja

9 Grudnia 2024