Instrukcja obsługi Velleman CS50


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Velleman CS50 (19 stron) w kategorii detektor. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
CS50
LOW-COST METAL DETECTOR
LOW-COST METAALDETECTOR
DÉTECTEUR DE MÉTAUX - MODÈLE ÉCONOMIQUE
DETECTOR DE METALES - MODELO ECONÓMICO
PREISWERTER METALLDETEKTOR
NISKA- WYKRYWACZ METALI
DETECTOR DE METAIS LOW-COST
USER MANUAL 3
GEBRUIKERSHANDLEIDING 5
MODE D’EMPLOI 7
MANUAL DEL USUARIO 9
BEDIENUNGSANLEITUNG 11
INSTRUKCJA OBSŁUGI 13
MANUAL DO UTILIZADOR 15
CS50
V. 02 16/03/2015 2 ©Velleman nv
CS50
V. 02 16/03/2015 3 ©Velleman nv
USER MANUAL
1. Introduction
To all residents of the European Union
Important environmental information about this product
This symbol on the device or the package indicates that disposal of the device after its lifecycle
could harm the environment. Do not dispose of the unit (or batteries) as unsorted municipal
waste; it should be taken to a specialized company for recycling. This device should be
returned to your distributor or to a local recycling service. Respect the local environmental
rules.
If in doubt, contact your local waste disposal authorities.
Thank you for choosing Velleman! Please read the manual thoroughly before bringing this device into
service. If the device was damaged in transit, do not install or use it and contact your dealer.
For educational purposes only - use only under the supervision of an adult instructor.
2. General Guidelines
Refer to the on the last pages of this manual. Velleman® Service and Quality Warranty
3. How to Set Up the Metal Detector
Only the length of the stem and the angle of the search coil have to be adjusted.
Adjusting the Length of the Stem
1. Turn the nut of the stem clockwise until it loosens.
2. Adjust the length of the stem until you can walk comfortably with the search coil at 0.5 to 2" above
the ground.
3. Tighten the nut by turning counterclockwise.
Adjusting the Position of the Search Coil
1. Loosen the knobs of the search coil and rotate the unit until it is parallel to the ground.
2. Tighten the knobs to keep the search coil from vibrating or rotating during use.
4. Battery Installation
Remove the cover of the battery compartment located on the handle and insert a new 9 V-battery.
Observe the polarity indications !
5. Operation
The Treasure Hunter enables you to hunt for coins, jewellery, gold and silver. The LED indicator on CS50
the handle will light when a metal object is detected and the buzzer will be activated.
Hold the in a comfortable position with the search coil parallel to a surface free of metal objects. CS50
Put the adjustable "ON/OFF" sensitivity switch (on the handle) in the position where the LED indicator
lights up slightly and the buzzer produces the faintest of beeping sounds. This is the "no-metal-detected"
threshold position in which the is at its most sensitive. Rotate the dial even further to enter the CS50
"metal-detected" state.
Use the "maximum sensitivity point" to perform a test on a metal object. The buzzer will beep at max.
volume and the LED will light at max. intensity. These elements indicate that a metal object has been
detected.
Place the sensitivity switch exactly between the "no metal detected"-state and the "metal detected"-
state. Familiarize yourself with the sensitivity of the device by repeating the test with objects of different
sizes made of various metals, such as copper, iron and aluminium.
Note: The max. sensitivity position will be influenced by environmental factors.
6. Tips for Treasure Hunters
Always install the max. sensitivity position when using the device.
Sweep the metal detector from side to side while maintaining a constant distance between the search
coil and the ground. Do not swing the detector like a pendulum.
Take your time. You may miss a target if you walk too fast.


Specyfikacje produktu

Marka: Velleman
Kategoria: detektor
Model: CS50

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Velleman CS50, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje detektor Velleman

Velleman

Velleman CS200 Instrukcja

9 Września 2024
Velleman

Velleman CS300 Instrukcja

5 Września 2024
Velleman

Velleman CS250 Instrukcja

3 Września 2024
Velleman

Velleman ZLUV220 Instrukcja

3 Września 2024
Velleman

Velleman CS102 Instrukcja

2 Września 2024
Velleman

Velleman CS10MD2 Instrukcja

30 Sierpnia 2024
Velleman

Velleman CS100N Instrukcja

29 Sierpnia 2024
Velleman

Velleman CS50 Instrukcja

28 Sierpnia 2024

Instrukcje detektor

Najnowsze instrukcje dla detektor