Instrukcja obsługi Vaddio ProductionVIEW HD

Vaddio Kontroler ProductionVIEW HD

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Vaddio ProductionVIEW HD (24 stron) w kategorii Kontroler. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/24
©2009 Vaddio - All Rights Reserved. ProductionVIEW HD - Document Number 341-759 Rev. C
Installation and User Guide
VADDIO™ P RODUCTIONVIEW™ HD
Camera Control Console with HD/SD Video Switching, Video Transitions,
Up/Down Converting of Inputs and Outputs, Lower Screen Graphics and
Automated Control Functionality
Model Number 999-5600-000 (NTSC)
Model Number 999-5600-001 (PAL)
Camera and Electronic Products for Integrators
ProductionVIEW HD
ProductionVIEW HD Manual 341-759 Rev. C Page 2 of 24
ProductionVIEW HD Overview
The ProductionVIEW HD (Figure 1) incorporates
seamless video switching, camera preset control and
joystick camera control functionality into one of the
most fully featured video consoles on the market
today. In addition, ProductionVIEW HD delivers user
selectable HD or SD inputs, and will up convert or
down convert the output signals to a variety of screen
resolutions and screen formats in component high
definition (HD), standard definition (SD) or RGBHV, all
with only one frame of delay.
Video graphics insertion (i.e. “lower third”) is available through our unique Lower Screen Graphics (LSG)
system. LSG allows users to insert graphics from a variety of graphics programs, including Microsoft®
PowerPoint®, Apple® Keynote®, MediaShout® or virtually any presentation software application. LSG
provides graphics insertion without the added latency or complexity of luminance or chroma keying.
The ProductionVIEW HD control surface is laid out to allow even a novice to operate the system with
minimal training. ProductionVIEW HD is unmatched in today’s camera control, video mixing and video
switching market.
• Video Switcher -- The internal video switcher can be configured as a traditional video switcher, using
the Take button, or Dual Bus mode.
• Dual Bus Mode – Dual Bus allows users to switch two separate programs (i.e. IMAG for live
presentations on the Program output, and a secondary program for a recording of the live event on
the Preview output). The Program output can be a discrete resolution setting from the Preview
outputs. Either set of outputs can be configured for SD, HD or RGBHV video resolution.
• Graphic Insertion -- Graphics may be inserted as “lower-thirds” using the Lower Screen Graphics
(LSG) feature. LSG can be set up to cover the bottom ¼,⅓, ½ or full screen, with 10 adjustable steps
of transparency levels between the graphic and the video image behind it.
• Anything In / Anything Out – The inputs and outputs have discrete video resolution settings. See the
specifications on page 20 for additional information on all of the resolutions supported.
• PTZ Camera Joystick -- The ProductionVIEW HD includes a joystick controller to operate up to six (6)
PTZ cameras directly (without daisy chaining) and the six discrete camera control ports auto-sense
the PTZ camera attached. Vaddio, Sony® and Canon® PTZ cameras are compatible with
ProductionVIEW HD (see the list of specific models). Each input has a camera selector to allow 12
preset PTZ positions to be stored.
• Transitions -- On the control surface, buttons for the type of effect (dissolve, wipe or cut) as well as
wipe patterns are selectable. The transition time is adjustable through a knob on the console, from
zero (0) to four (4) seconds.
• Automatic Mode -- The console is equipped with an Automatic Camera Switching Mode (for
compatible PTZ cameras on inputs 1 & 2), and when combined with Vaddio’s StepVIEW Mats,
MicVIEW or other trigger devices, allows ProductionVIEW HD to be set up for use without an operator
present.
• Tally Outputs -- The ProductionVIEW HD also has six Tally outputs for controlling tally lights on
external sources, such as Vaddio’s WallVIEW CCUs and PreVIEW HD monitors.
• Graphic Templates -- A variety of graphic templates are included on a DVD supplied with
ProductionVIEW HD in both Keynote and PowerPoint, to help guide users to create professional
graphics quickly and easily.
• Additional Features – Other features include auto/manual focus, auto/manual iris, backlight
compensation and automatic white balance for compatible PTZ cameras.
Figure 1: ProductionVIEW HD Camera Control Console
ProductionVIEW HD
ProductionVIEW HD Manual 341-759 Rev. C Page 3 of 24
Key Technical Features:
• Camera Auto-Sensing - The ProductionVIEW HD is capable of auto-sensing each PTZ camera
attached. Control codes for the following cameras are built-in:
• Vaddio ClearVIEW HD-18 PTZ Camera
• Vaddio WallVIEW, CCU and PRO Series Cameras
• Vaddio CeilingVIEW 70 PTZ Series Cameras
• Vaddio HideAway Series Cameras
• Vaddio CeilingVIEW Document Cameras
• Vaddio Model Series and PTZCam Series Cameras
• Sony EVI-HD1, EVI-D30, EVI-D100 & EVI-D70 & Sony BRC-300, BRC-Z700 & BRC-H700
• Panasonic AW-HE100
• Vaddio Add-A-Cam and Pan/Tilt PRO
• Canon VC-C50i & VC-C50iR
• Video Transitions
Video transitions are seamless with exceptional video quality. Transition time is adjustable from zero
(0) to four (4) seconds and include:
• Cross Fades (one image fades into another)
• Wipes (9 different patterns)
• Straight Cuts
• Fade To Black (by pressing, and holding the MIX/FTB button)
Intended Use:
Before operating the Vaddio ProductionVIEW HD, please read the entire manual thoroughly. The system
was designed, built and tested for use indoors, and with the provided power supply and cabling. The use
of a power supply other than the one provided or outdoor operation has not been tested and could
damage the camera and/or create a potentially unsafe operating condition.
Save These Instructions:
The information contained in this manual will help you install and operate your Vaddio ProductionVIEW
HD. If these instructions are misplaced, Vaddio keeps copies of Specifications, Installation and User
Guides and most pertinent product drawings for the Vaddio product line on the Vaddio website. These
documents can be downloaded from www.vaddio.com free of charge.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or
damaged. In this case, a Vaddio technician must examine the product before operating. To reduce the
risk of electric shock, do not immerse in water or other liquids and avoid extremely humid conditions.
UNPACKING:
Carefully remove the device and all of the parts from the packaging.
Unpack and identify the following parts:
• One (1) ProductionVIEW HD Camera Control Console, Part Number 999-5600-000/-001
• One (1) Vaddio PowerRite 18 VDC, 2.78A Power Supply
• One (1) AC Cord Set (US or UK and Europe)
• DVD ROM with templates and sample graphics for Lower Screen Graphics*
• Documentation and Manuals
* User must supply their own compatible version of Keynote or PowerPoint to display and modify
templates on the DVD ROM.
Use only the power supply provided with the ProductionVIEW HD system.
Use of any unauthorized power supply will void any and all warranties.

Specyfikacje produktu

Marka: Vaddio
Kategoria: Kontroler
Model: ProductionVIEW HD

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Vaddio ProductionVIEW HD, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Kontroler Vaddio

Vaddio

Vaddio ProductionVIEW HD Instrukcja

30 Sierpnia 2024
Vaddio

Vaddio ProductionVIEW HD MV Instrukcja

28 Sierpnia 2024
Vaddio

Vaddio PCC MatrixMIX Instrukcja

27 Sierpnia 2024
Vaddio

Vaddio ProductionView HD-SDI MV Instrukcja

14 Sierpnia 2024
Vaddio

Vaddio PCC Premier Instrukcja

6 Sierpnia 2024

Instrukcje Kontroler

Najnowsze instrukcje dla Kontroler

PowerA

PowerA Enhanced Wireless Controller Instrukcja

26 Lutego 2025
Nyko

Nyko Sound Pad Instrukcja

25 Lutego 2025
Nyko

Nyko Air Glow 87303 Instrukcja

25 Lutego 2025
Nyko

Nyko 87270 Instrukcja

25 Lutego 2025
IPEGA

IPEGA PG-9078 Instrukcja

20 Lutego 2025
Showtec

Showtec AirDrive 2.4 Pocket Instrukcja

20 Lutego 2025
Axis

Axis TA4201 Instrukcja

20 Lutego 2025
Speed-Link

Speed-Link Black Bolt SL-650300-BK Instrukcja

20 Lutego 2025
PowerA

PowerA Advantage Wired Controller Instrukcja

19 Lutego 2025
PowerA

PowerA Enhanced Wired Controller Instrukcja

19 Lutego 2025