Instrukcja obsługi US Blaster USB 7327

US Blaster Muzyka na imprezę DJ-ską USB 7327

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla US Blaster USB 7327 (16 stron) w kategorii Muzyka na imprezę DJ-ską. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/16

DESCRIPTION OF THE FUNCTIONS

Top View:

1. EJECT BUTTON

Press to eject the disc.

Note: Disc can’t be ejected unless the stop or pause button has been pushed first.

2. L.C.D.

These liquid crystal displays (L.C.D.) indicate the track numbers, time (minutes, seconds, frames), pitch range, and relative playback information.

3. AUTO CUE SINGLE / CONTINUE Button

To press this button it can switch between auto cue single and continue. The selected mode is indicated on the display.

*AUTO CUE SINGLE - After each track, the unit pauses at the beginning of next track. The playback starts from audible point.

*CONTINUE -To play all tracks continually.

*OUTRO - The unit will play the last 30 seconds of each track. Press the button for 3 seconds to switch OUTRO function.

4. TIME / STOP BUTTON

This button switches the time display between total remaining time, remaining time of the current song, elapsed playing time. The unit will be in the

“stop” mode if you continue pressing the button for 3 seconds.

5. SEARCH BUTTON

Pressed the button to switch the function of Jog Dial between SEARCH and PITCH BEND.

 When the indicator LED is light, dial the jog for quick search forward and backward.

 When the indicator LED is off, dial the jog for pitch bend function.

 If the jog is unmoved for 8 seconds, the indicator light will go off.

6. TRACK BUTTON

These buttons select the track to be played.

7. PLAY/ PAUSE BUTTON

Each press of this button causes the operation to change between PLAY and PAUSE modes.

8. CUE BUTTON

The cue function allows the CD returning to the memorized point. In PAUSE mode, pressing the CUE button to set the cue point, and the CUE button

blinks; in PLAY mode, press this button to pause the unit at the memorized point.

9. BOP BUTTON

The playback will automatically play from the CUE point upon the button is pressed.

10. PITCH ON/OFF BUTTON

Press the button to be PITCH ON mode, press it again on the PITCH ON mode, and blinks with unit on the PITCH OFF mode.

11. PITCH % SELECT BUTTON

Select the pitch change range from ±8%, ±16%, ±32%, ±100%. The playback speed will change when you move the pitch control slider.

12. PITCH CONTROL SLIDER

To match the choices of playback speed (8%, 16%, 32%, 100%), you can choose what range you want between minimum (up side) and maximum

(bottom side) by moving the pitch control slider.

13. PITCH BEND + / - BUTTON

When each of the two CD players is playing, the pitch bend function allows the position of the bass beat to be matched after the pitch has been

adjusted. The pitch will automatically rise up to + 16% from the current setting while pressing the “ + “button. While pressing the “ – “ button, the

pitch will automatically drop to - 16 % from current setting. By the way of changing the pitch the position of the beats can be matched.

14. 3 HOT-CUE

This unit will allow you to play from 3 cue points instantly.

a.Set CUE memory: Press the MEMO button first, and then press the CUE button to complete the CUE setting, then this CUE button will light up.

b.Play” CUE” memory: Upon pressing specific CUE button, it will flash about 5 seconds.

Note: This function is not available during perform REVERSE sound effect.

15. +10 BUTTON/IDENTIFY

Pressed the button to forward 10 tracks. If you forward 10 tracks, and the tracks over total tracks, the unit will jump to track 1...

Identify function(MEMO):

CD setting information can be stored in the non-volatile memory. The stored information can be called out of the memory at the later time.

A. Disc identify function is workable with Pause Mode only.

B. Press the Disc identify button for 2 seconds in Pause mode. When the MEMO is saving into EEPROM, the LCD Display “AUTO CUE” will blinks at

2Hz frequency. The LCD Display “AUTO CUE” will blinks at 1Hz frequency after the saving procedure is completed.

2Hzf frequency blinking, MEMO is saving into the EEPROM

1Hzf frequency blinking, save completed.

C. When the CD includes tracks that CDJ840 has MEMO is inserted, the LCD Display “AUTO CUE” will ON.

D. When the CD includes tracks that CDJ840 has MEMO CUE Point is inserted, the LCD Display “AUTO CUE” blinks at 1Hz frequency.

E. Press the “+10/LOAD” button for 2 seconds, the recorded CUE TIME will load to the Micon Main Cue and the LCD Display “ AUTO CUE” blinks.

F. The Cue Point will shows on the LCD Display for 2.5 seconds after complete loading, and back to the previous display time before loading.

“Auto Cue” On: the CD includes MEMO tracks

1Hz frequency blinks: the song includes MEMO Cue Point

2Hz frequency blinks: Loading to the Micon Main Cue

16. JOG WHEEL

*Speed Control (SEARCH indicator off)

Rotating the wheel, in play mode, will change the playback speed accordingly. While rotating clockwise, the player speed increase; rotating

counterclockwise, the speed decrease.

*Search (SEARCH indicator lights)

Rotating the wheel, the player will forward or backward quickly. The searching speed changed according to the dialing speed. To perform frame search,

first pause the CD then rotate the jog wheel while search indictor is off..

17. Seamless Loop

There is A, B/LOOP/ EXIT, RELOOP buttons.

i. . A BUTTON---“start point” (A point. Also, Cue 1 could be A point) After setting up the A point, the red Led light up

ii. . B / LOOP EXIT BUTTON: ---“ End point”(B point). Press the B /LOOP button to set up the B point and start the loop playback automatically. Loop

lights on the display and the 3 LEDs flash. Press this button again to exit the LOOP playback.

iii. . Return to the loop playback by pressing the RELOOP while in performance.

iv. . Change “ START POINT” and” END POINT” by pressing the A& B/ LOOP EXIT button again

v. . The interval between A and B point must be more than 20 frames; otherwise, the B point will be canceled, then LOOP function disappear and LOOP

fades on the display

18. Direct Access Key(0~9)

To select the number of the track you would like to play.

19. RELAY

Press the “RELAY” button to activate. When one unit is in play mode, and the other unit is in “pause” mode; pause the playing unit, the other unit will

automatically start to play (the button will blink).

20. BPM BUTTON

You can get the BPM number automatically or manually. Pressing the BPM BUTTON for 3 seconds to switch between auto and manual control. The

BEAT will be shown on the display! Under the manual mode, tapping this button to get the beat value.

21. KEY ON/OFF SWITCH

Press the button to switch KEY mode on or off.

 KEY OFF: The display shows the “KEY” in blinking, and the key changed according to the pitch change. The key parameter adjustment is not in

effect

 KEY ON: The “KEY” lights on the display, turning the SCOPE knob to adjust the key. Slide the pitch slider will also change the key.

22. SLEEP:

Leave the unit unused for 30 minutes; the machine will shut off automatically.