Instrukcja obsługi UPM SE-11P
UPM
Przełączniki czasowe
SE-11P
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla UPM SE-11P (7 stron) w kategorii Przełączniki czasowe. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/7
CLOCK SETTING
1
*
*
4
2
5
6
7
8
Press the key to begin the clock setting. The symbol will appear.
Before proceeding with the clock setting and programming for the first time,
press the key.RESET ( )
Select the current day using the or key.
Press the key
Select the current hour using the or key
Press the key
Select the current minute using the or key
9
10
3
Press the key
Set the seconds to zero by pressing either the or key
Press the key to finish the clock setting
To set the clock, first check to see that the display is
in the clock mode ( ). If the display does not
show , press either the or key until
the clock mode ( ) is displayed.
For proper operation, ensure the clock is set to the correct time.
GETTING STARTED button placements
display
1
2
3
4
ON/OFF – manual on/off control
RESET ( ) – reset
5
CD – activates countdown timer
6
RANDOM – activates random function
– scrolls through selections
6
SET – activates set function
To toggle between 12 or 24 hour format, press the key during clock setting
SET
SET
RANDOM
SET
SET
SET
If you are using the 12 hour format and you are setting an afternoon or evening time,
ensure that the symbol appears on the left.PM
Programmable Digital Timer
SE-11P
OWNER’S
MANUAL
Please take the time to read
and understand this manual
so you can begin to enjoy
the convenience and energy
saving benefits this product
has to offer.
FEATURES
!
!
!
!
!
!
14 ON settings /
14 OFF settings
Programs can be set to
operate on a specific day,
Monday to Friday,
Monday to Saturday,
Saturday and Sunday, or
everyday of the week
Countdown timer
Random function
12/24 hour clock
15A, 1800W (resistive);
600W (tungsten)
R
R
SET
PAGE 1 PAGE 2 PAGE 3
ON/OFF
ON/OFF
ON/OFF
ON/OFFON/OFF RANDOM
RANDOM
RANDOM
RANDOMRANDOM
PROG
PROG
PROG
PROGPROG
CD
CD
CD
CDCD
SET
SET
SET
SETSET
R
R
R
RR
Set
Weekday indicator
Random
Time display
Clock Countdown Program ON/OFF indicator
Program disable
DST indicator
PM indicator
This timer allows you to disable any particular program, or if you have more than one
program set, you can disable all of them at once using the function.master disable
PROGRAM DISABLE
To disable a single program, select the program of choice by using the
or key.
When a program is disabled, the time settings are stored in memory so that when you
re-enable the programs, the timer will resume with the same programs as before.
SINGLE PROGRAM DISABLE
1
NOTE: You will need to disable both the ON and OFF setting of the
program to completely disable that particular program.
2Press the key
3Press the key to disable the program. An symbol will appear to
indicate that the particular setting has been disabled.
X
4Press the key 3 times to exit.
EXAMPLE:
You wish to disable PROGRAM 2 only.
The symbol will appear and the day(s) will be blinking.
PAGE 9
SET
ON/OFF
SET
If this was the ON setting that was disabled, now proceed to disable the OFF setting
of the same program to completely disable that particular program; or if you had
disabled the OFF setting first, now go to the ON setting.
PROGRAM DISABLE
Select the OFF setting of the same program by using the or key.
1
2Press the key
3Press the key to disable the program. An symbol will appear to
indicate that the particular setting has been disabled.
X
4Press the key 3 times to exit.
EXAMPLE:
You wish to disable PROGRAM 2 only.
The symbol will appear and the day(s) will be blinking.
You have now successfully disabled PROGRAM 2.
*To the particular program, repeat the above steps for the ON and
OFF settings. The symbol will indicating that the program has
been re-enabled (returned to normal).
re-enable
X disappear
PAGE 10
ON/OFF
SET
PROGRAM DISABLE
To perform the , go to the clock mode ( ) by using the
or key.
master disable
MASTER PROGRAM DISABLE
1
2Press the key
3Press the key to disable the program. An symbol will appear to
indicate that programs have been disabled.
X
all
4Press the key 4 times to exit.
The symbol will appear and the day will be blinking.
If you have more than one program set, and you wish to disable of them at once,
you can do so by using the function.
all
master disable
*To the programs, repeat the above steps. The symbol will
indicating that all the programs have been re-enabled (returned to
normal).
re-enable X
disappear
You have now successfully disabled ALL programs.
PAGE 11
SET
SET
ON/OFF
6
LED – lights up when the power is ON
7
6
3
ON/OFF
ON/OFF
ON/OFF
ON/OFFON/OFF RANDOM
RANDOM
RANDOM
RANDOMRANDOM
PROG
PROG
PROG
PROGPROG
CD
CD
CD
CDCD
SET
SET
SET
SETSET
R
R
R
RR
245
1
7
hp://waterheatermer.org/UPM-mers-and-manuals.html
SCROLLING THROUGH THE MODESDAYLIGHT SAVING TIME (DST)
SET
To activate the Daylight Saving Time (DST) function, press and hold both the
and keys together for 3 seconds in the clock mode ( ). When the
DST function is activated, a solid sun symbol ( ) will appear on the LCD screen
and the time will have advanced by one hour.
To de-activate the DST function, press and hold both the and keys again
for 3 seconds in the clock mode ( ). The sun symbol ( ) will disappear
and the time will go back by one hour.
The modes are arranged in a circular pattern. Use the or key to scroll
through the different modes and programs.
EXAMPLE:
MEMORY BACKUP
This timer is equipped with replaceable button cell batteries. The batteries serve to
protect the time and program settings in the case of a power failure.
PROGRAM SETTING
This timer is a programmable switch that will automatically turn your lights (or small
appliance) ON and OFF based on your specified times. You can program up to 14
programs ( 14 ON settings and 14 OFF settings).
From the clock mode ( ), press the key
once to go to the setting of PROGRAM 1.ON
Press the key to begin the program setting.
The symbol will appear and the days (MO TU WE TH FR SA SU) will be
blinking. Select the desired day or days of operation by pressing the
or key.
There are 3 primary modes with this timer.
NOTE: The PROGRAM MODE consists of 14 programs.
pair ON OFFEach program has of a of settings: an setting and an setting.
In total, there are 14 ON settings and 14 OFF settings.
!
!
!
CLOCK MODE
PROGRAM MODE
COUNTDOWN MODE
!
!
!
!
!
a specific day (MO, TU, WE, TH, FR, SA SU);
Monday through Friday (MO TU WE TH FR);
Monday through Saturday (MO TU WE TH FR SA);
Saturday and Sunday (SA SU); or
everyday from Monday through Sunday (MO TU WE TH FR SA SU)
or
Programs can be set to operate on:
NOTE: Your choice of days are - a specific day, Monday through Friday,
Monday through Saturday, Saturday and Sunday, or everyday of the week
How to set a program
Example: Turn ON at 5:15 pm and OFF at 10:45 pm everyday, seven days a week.
IMPORTANT: In order for a program to work, the ON and the OFF settings
must be set.
both
1
2
3
CLOCK (default)
COUNTDOWN
PROGRAM 1 ON
PROGRAM 2 ON
PROGRAM 1 OFF
PROGRAM 2 OFF
SCROLLING THROUGH
THE MODES
PROGRAM 14 OFF
PROGRAM 14 ON
PROGRAM 13 OFF
PROGRAM 13 ON
QUICK-RETURN TO THE CLOCK MODE
At any particular mode, if you wish to return to the clock mode immediately, you
may do so by pressing both the and keys together and release. This
brings the display directly back to the clock mode. Or, if no key is pressed within
one minute, the display will also automatically default itself back to the clock mode.
COUNTDOWN TIMER
5Select the hour (duration) using the or key
SET
Press the key.
6
7Select the minute (duration) using the or key
SET
Press the key.
8
9Select the second (duration) using the or key
SET
Press the key to complete the countdown setup.
10
CD
To the countdown timer, press the key. Once activated, in the
countdown mode ( ), the duration time will begin counting down.
START
*
If you move onto any other mode, such as the clock mode ( ) or
program mode ( ), you will notice that the CD symbol will be blinking.
NOTE: The CD symbol will disappear once the countdown timer has stopped.
EXAMPLE:
This shows the countdown duration set for 1 hour
45 minutes 30 seconds, starting from the OFF
position.
The countdown timer will automatically once the time reaches zero.
NOTE: The duration time will automatically be set back to its preset value.
STOP
*
To the countdown timer before the duration time ends, press either the
or key. The duration time will automatically be set back to its
preset value.
STOP
*ON/OFFCD
NOTE: If the LCD screen becomes dim or faded when the timer is unplugged from the
outlet, you should replace the button cell batteries on the back of the timer.
Battery Installation:
1. Unplug timer from the outlet. Remove the battery cover from the back of the timer.
2. Remove old batteries, and insert two fresh button cell batteries, observing proper polarity.
3. Replace the battery cover.
PAGE 4 PAGE 5 PAGE 6
PAGE 13
Normal DST Activated
COUNTDOWN TIMER
The countdown timer works like an hour-glass. You can set a specific duration and
once the countdown is activated, the time will begin to count gradually down to zero.
The countdown can start either in the ON or OFF position.
EXAMPLES OF USE:
!
!
For instance, set the lights to stay ON for 25 minutes (or any other duration as
desired), and automatically turn OFF after that.
Or, set it so that the lights stays OFF for 40 minutes, for example, and
automatically turn ON after that.
NOTE:
!
!
When the countdown timer is activated, all other programs and random functions
are disabled.
The duration can be set from one second up to 23 hours 59 minutes 59 seconds.
From the clock mode ( ), press the
key once to go to the countdown mode ( ).
Press the key to begin setting.
The symbol will appear and or indicator will be blinking. Select
the desired position by using the or key.
ON OFF
1
2
3
Press the key.
4
PAGE 12
SET
SET
RANDOM FUNCTION
The random function serves as a security feature that allows you to have your
lights turn ON and OFF randomly. The random lighting effectively provides a
lived-in (at-home) look, acting as a deterrent.
There are 3 types of random functions that you can choose with this timer:
-!
!
!
SHORT RANDOM this mode will cycle your lights ON and OFF for 1 to 2 hour cycles.
LONG RANDOM
PROGRAM RANDOM
-
-
this mode will cycle your lights ON and OFF for 2 to 3 hour cycles.
this mode allows you to set the specific day(s) and time of day
(i.e. in the evenings only between 6 pm and 11 pm, Monday to Friday) for the random
function to operate. The programmable random will run on 1 to 2 hour cycles.
How to activate or de-activate the SHORT random?
In the clock mode ( ), press the key
to activate the SHORT random. Once activated, the
RND symbol will be blinking.
The random function can be de-activated by pressing the key again
or the key. The RND symbol will disappear once the random function
is de-activated.
How to activate or de-activate the LONG random?
In the countdown mode ( ), press the
key to activate the LONG random. Once
activated, the L-RND symbol will be blinking.
The random function can be de-activated by pressing the key again
or the key. The L-RND symbol will disappear once the random
function is de-activated.
PAGE 14
NOTE: When the random function is activated, all other programs and countdown timer are disabled.
RANDOM
RANDOM
ON/OFF
RANDOM
RANDOM
ON/OFF
TROUBLESHOOTING
problem solution
TECHNICAL SPECIFICATIONS
Programs: 14 programs (with 14 ON settings and 14 OFF settings)
Ratings: 120V AC, 15A
Maximum Load: 1800W (resistive); 600W (tungsten)
Minimum switching time: 1 minute
Technical Support: 1-888-468-6876
MANUAL ON/OFF
*
R
To manually turn the power ON or OFF, press the key. You can use this
at any time to temporarily override the current programming schedule. The ON
or OFF symbol will be blinking. The timer will resume with its normal programs
at the next scheduled program time.
PAGE 7
PAGE 16
LCD screen seems “frozen”. Function keys will
not respond.
Press the RESET ( ) key to reset the timer.
LCD screen becomes dim or faded when timer
is unplugged from the outlet.
Replace the button cell batteries on the back of the
timer.
Programs do not execute at the specified times. Ensure that the random function or countdown timer
is not activated. Check programs – ensure that you
have not accidentally programmed in unwanted
settings into the other program slots available. If
you do find unwanted settings, you may disable
them using the single program disable method. Or,
if it is easier, press the RESET ( ) key to reset the
timer, then set the clock and the correct programs
again.
R
Programs do not execute at all. Ensure that the programs are not disabled. Refer to
PROGRAM DISABLE.
ON/OFF
5
7
4
6
8
Select the hour using the or key
Select the minute using the or key
PROGRAM SETTING
After you finished with the ON setting, press the
key to go to the OFF setting of PROGRAM 1.
Press the key
Press the key
Press the key
Press the key to finish the setting of PROGRAM 1.ON
EXAMPLE:
For everyday, select (MO TU WE TH FR SA SU)
EXAMPLE:
5 pm
17 hours
Select (if clock is set on the 12 hour format); or
select (if clock is set on the 24 hour format).
EXAMPLE:
15 minutesSelect
You should now proceed to set the OFF setting of PROGRAM 1.
10
9
SET
SET
SET
SET
13
15
Select the hour using the or key
Select the minute using the or key
NOTE: The display will automatically revert back to the clock mode after one
minute, or you can use the or key to scroll to the clock mode or
any of the other modes immediately.
PROGRAM SETTING
Press the key
Press the key
Press the key to finish the setting of PROGRAM 1.OFF
The days of operation
will re-appear. Confirm, or change if necessary using
the or key.
as selected in the ON setting
EXAMPLE:
10 pm
22 hours
Select (if clock is set on the 12 hour format); or
select (if clock is set on the 24 hour format).
EXAMPLE:
45 minutesSelect
You have now completed the ON and OFF setting of PROGRAM 1.
To set more programs, repeat the above procedures using the available
program slots (PROGRAMS 2 to 20).
12
14
16
11
PAGE 8
SET
SET
SET
RANDOM FUNCTION
How to set the time period for the PROGRAMMABLE random?
From the clock mode ( ), press the key
three times to go to the ON setting of PROGRAM 14.
How to activate or de-activate the PROGRAM random?
In the PROGRAM 14 mode (either in the ON or OFF
setting), press the key to activate the
PROGRAM random. Once activated, the RND
symbol will appear and remain (not blinking) on
the LCD screen.
solid
The random function can be de-activated by pressing the key again
or the key. The RND symbol will disappear once the random function
is de-activated.
IMPORTANT: The PROGRAM RANDOM will only work
when set on PROGRAM 14.
Set up the ON-time as you would with a regular
program ON setting. Refer to PROGRAM SETTING.
Press the key to proceed with setting up the OFF-time.
Set up the OFF-time as you would with a regular
program OFF setting. Refer to PROGRAM SETTING.
EXAMPLE: This shows the ON-time is set for 6 pm
from Monday to Friday.
EXAMPLE: This shows the OFF-time is set for 11 pm
from Monday to Friday.
1
2
33
34
PAGE 15
RANDOM
RANDOM
ON/OFF
Specyfikacje produktu
| Marka: | UPM |
| Kategoria: | Przełączniki czasowe |
| Model: | SE-11P |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z UPM SE-11P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Przełączniki czasowe UPM
11 Października 2024
Instrukcje Przełączniki czasowe
- Przełączniki czasowe Elro
- Przełączniki czasowe Goobay
- Przełączniki czasowe Alecto
- Przełączniki czasowe Cotech
- Przełączniki czasowe ABB
- Przełączniki czasowe Profile
- Przełączniki czasowe Qazqa
- Przełączniki czasowe GARO
- Przełączniki czasowe Malmbergs
- Przełączniki czasowe Gamma
Najnowsze instrukcje dla Przełączniki czasowe
9 Sierpnia 2024
8 Sierpnia 2024
5 Lipca 2024
5 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
3 Lipca 2024
3 Lipca 2024