Instrukcja obs艂ugi UPM EM130

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla UPM EM130 (18 stron) w kategorii Licznik koszt贸w energii. Ta instrukcja by艂a pomocna dla 7 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Strona 1/18
EM130 is an energy meter
that allows you to measure
the amount of electricity used
by an appliance. It enables
you to enter the electricity
price per Kilowatt Hour (Kwh)
for two different time periods
to calculate the total cost of
an appliance's power
consumption, and to monitor
the electricity usage. It also
detects energy overloads
and records the maximum
wattage, while recording the
time of the occurrence.
EM130
Dual rate energy meter
W RO NE 鈥橲
ALMANU
ATUFE RES
Energy monitor and
consumption tracking
Maximum current load
and wattage readings
Energy cost calculation
Energy usage time
Overload warning
Dual price
1
TABLE OF CONTENTS
Batteries......................................................................................................3
LCD Display and Buttons...........................................................................4
Energy or measurement mode ..................................................................5
ENERGY MODE.........................................................................................6
1) Voltage / Frequency...............................................................................6
2) Amperage / Power Factor ......................................................................6
3) Wattage ..................................................................................................7
4) Maximum Wattage .................................................................................7
5) Kilowatt ...................................................................................................8
6) Cost Total / On Time...............................................................................8
COST TOTAL / ON TIME ..........................................................................9
Clock Setting ..............................................................................................10
PRICE MODE ............................................................................................11
1) Enter Energy Price(s).............................................................................12
2) Maximum Load.......................................................................................14
Troubleshooting .........................................................................................16
Technical Specifications.............................................................................17
Warranty .....................................................................................................18
2
BATTERIES
Your new energy meter comes with two button cell batteries already installed.
To begin operation, you must first remove the ribbon from the battery
compartment located at the back of the unit.
1Carefully pull out the ribbon from
the battery compartment;
this will activate the batteries.
Ensure the two button cell batteries
are properly in place, then replace the
battery cover. (Be careful not to bend
any of the metal contacts
To replace batteries that are worn
out, remove the battery cover.
Replace batteries as required to ensure the proper operation of this unit.
The batteries serve as a memory backup for the readouts and settings.
If the energy meter is not in use for an extended period of time it is
recommended to remove the batteries from the unit.
3
1

Specyfikacje produktu

Marka: UPM
Kategoria: Licznik koszt贸w energii
Model: EM130

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z UPM EM130, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮