Instrukcja obsługi Unimac LXG3000 MKII
Unimac
zestaw do pielęgnacji paznokci
LXG3000 MKII
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Unimac LXG3000 MKII (29 stron) w kategorii zestaw do pielęgnacji paznokci. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/29
User Manual
[Revision 2 M .0 ay 2022]
READ THIS MANUAL CAREFULLY BEFORE USE – FAILURE TO DO SO MAY RESULT IN INJURY, PROPERTY DAMAGE
AND MAY VOID WARRANTY. • KEEP THIS MANUAL FOR FUTURE REFERENCE. • Products covered by this manual may
vary in appearance, assembly, inclusions, specifications, description, and packaging.
Framing Nailer LXG3000 MkII-
E&OE © 2 2022 Unimac
Safety
Safety messages are designed to alert you to possible dangers or hazards that could cause death, injury or
equipment or property damage if not understood or followed. Safety messages have the following symbols:
You WILL be KILLED or
SERIOUSLY INJURED if you do
not follow instructions.
You CAN be KILLED or
SERIOUSLY INJURED if you do
not follow instructions.
You CAN be INJURED if you do
not follow instructions or equipment
damage may occur.
It is vital that you read and understand this
user manual before using the product,
including safety warnings, and any assembly
and operating instructions. Keep the manual
for future reference.
Safety precautions and recommendations
detailed here must be fully understood and
followed to reduce the risk of injury, fire,
explosion, electrical hazard, and/or property
damage.
Safety information presented here is generic
in nature some advice may not be –
applicable to every product. The term
"equipment" refers to the product, be it
electrical mains powered, battery powered or
combustion engine powered.
• - Before Use If you are not familiar with the
safe operation/handling of the equipment or
are in any way unsure of any aspect of
suitability or correct use for your
application, you should complete training
conducted by a person or organization
qualified in safe use and operation of this
equipment, including fuel/electrical handling
and safety.
• Do NOT operate the equipment in
flammable or explosive environments, such
as in the presence of flammable liquids,
gases or dust. The equipment may create
sparks or heat that may ignite flammable
substances.
• Keep clear of moving parts.
• Equipment may be a potential source of
electric shock or injury if misused.
• Do NOT operate the equipment if it is
damaged, malfunctioning or is in an
excessively worn state.
• Do NOT allow others to use the equipment
unless they have read this manual and are
adequately trained.
• - risk Keep packaging away from children
of suffocation! Operators must use the
equipment correctly. When using the
equipment, consider conditions and pay
due care to persons and property.
General Work Area Safety
• Work areas should be clean and well it.
• Do not operate the equipment if
bystanders, animals etc are within
operating range of the equipment or the
general work area.
• If devices are provided for connecting dust
extraction / collection facilities, ensure
these are connected and used properly.
Dust related collection can reduce dust-
hazards.
General Personal Safety
• Wear appropriate protective equipment
when operating, servicing, or when in the
operating area of the equipment to help
protect from eye and ear injury, poisoning,
burns, cutting and crush injuries. Protective
equipment such as safety goggles,
respirators, non slip safety footwear, hard -
hat, hearing protection etc should be used
for appropriate equipment / conditions.
Other people nearby should also wear
appropriate personal protective equipment.
Do not wear loose clothing or jewellery,
which can be caught in moving parts. Keep
hair and clothing away from the equipment.
• Stay alert and use common sense when
operating the equipment. Do not over-
reach. Always maintain secure footing and
balance.
• Do not use the equipment if tired or under
the influence of drugs, alcohol or
medication.
• This equipment is not intended for use by
persons with reduced physical, sensory or
mental capabilities.
General Fuel Safety
• Petrol/fuel/gasoline is extremely flammable
– keep clear of naked flames or other
ignition sources.
• Do not spill fuel. If you spill fuel, wipe it off
the equipment immediately if fuel gets on –
your clothing, change clothing.
• Do NOT smoke near fuel or when
refuelling.
• Always shut off the engine before
refuelling.
• Do NOT refuel a hot engine.
• Open the fuel cap carefully to allow any
pressure build up in the tank to release -
slowly.
• Always refuel in well ventilated areas.
• Always check for fuel leakage. If fuel
leakage is found, do not start or run the
engine until all leaks are fixed.
General Carbon Monoxide Safety-
• Using a combustion engine indoors CAN
KILL IN MINUTES. Engine exhaust
contains carbon a poison you -monoxide –
cannot smell or see.
• Use combustion engines OUTSIDE only,
and far away from windows, doors and
vents.
General Equipment Use and Care
• The equipment is designed for domestic
use only.
• Handle the equipment safely and carefully.
• Before use, inspect the equipment for
misalignment or binding of moving parts,
loose components, damage or any other
condition that may affect its operation. If
damaged, have the equipment repaired by
an authorised service centre or technician
before use.
• Prevent unintentional starting of the
equipment - ensure equipment and power
switches are in the OFF position before
connecting or moving equipment. Do not
carry equipment with hands or fingers
touching any controls. Remove any tools or
other items that are not a part of the
equipment from it before starting or
switching on.
• Do not force the equipment. Use the
correct equipment for your application.
Equipment will perform better and be safer
when used within its design and usage
parameters.
• Use the equipment and accessories etc. in
accordance with these instructions,
considering working conditions and the
work to be performed. Using the equipment
for operations different from those intended
could result in hazardous situations.
• Always keep equipment components
(engines, hoses, handles, controls, frames,
housings, guards etc) and accessories
(cutting tools, nozzles, bits etc) properly
maintained. Keep the equipment clean and,
where applicable, properly lubricated.
• Store the equipment out of reach of
children or untrained persons. To avoid
burns or fire hazards, let the equipment
cool completely before transporting or
storing. Never place or store the equipment
near flammable materials, combustible
gases or liquids etc.
• -The equipment is not weather proof, and
should not be stored in direct sunlight, at
high ambient temperatures or locations that
are damp or humid.
• Do not clean equipment with solvents,
flammable liquids or harsh abrasives.
• For specific equipment safety use and care,
see Equipment Safety.
Framing Nailer LXG3000 MkII-
E&OE © 3 2022 Unimac
General Electrical Safety
• Inspect electrical equipment, extension
cords, power bars, and electrical fittings for
damage or wear before each use. Repair or
replace damaged equipment immediately.
• Ensure all power sources conform to
equipment voltage requirements and are
disconnected before connecting or
disconnecting equipment.
• When wiring electrically powered
equipment, follow all electrical and safety
codes.
• Wherever possible, use a residual current
device (RCD).
• High voltage / high current power lines may
be present. Use extreme caution to avoid
contact or interference with power lines.
Electrical shock can be fatal.
General Electrical Safety
• Electrically grounded equipment must have
an approved cord and plug and be
connected to a grounded electrical outlet.
• Do NOT bypass the ON/OFF switch and
operate equipment by connecting and
disconnecting the electrical cord.
• Do NOT use equipment that has exposed
wiring, damaged switches, covers or
guards.
• Do NOT use electrical equipment in wet
conditions or in damp locations.
• Do NOT use electrical cords to lift, move or
carry equipment.
• Do NOT coil or knot electrical cords, and
ensure electrical cords are not trip hazards.
General Service Information
• The equipment must be serviced or
repaired at authorised service centres by
qualified personnel only.
• Replacement parts must be original
equipment manufacturer (OEM) to ensure
equipment safety is maintained.
• Do NOT attempt any maintenance or repair
work not described in this manual.
• After use, the equipment and components
may still be hot allow the equipment to –
cool and disconnect spark plugs and/or
electrical power sources and/or batteries
from it before , changing adjusting
accessories, or performing repair or
maintenance.
• Do NOT adjust while the equipment is
running.
• service- Perform related activities in suitable
conditions, such as a workshop.
• Replace worn, damaged or missing
warning/safety labels immediately.
FRAMING NAILER SAFETY
• Read and understand tool labels and all of the operating instructions, safety precautions and warnings in this manual before operating
or maintaining this nailer. Failure to follow warnings could result in DEATH or SERIOUS INJURY.
• Most accidents that result from the operation and maintenance of nailers are caused by the failure to observe basic safety rules or precautions.
An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety
procedures.
• Basic safety precautions are outlined in the Safety section of this Manual and in the sections, which contain the operation and maintenance
instructions.
• Hazards that must be avoided to prevent bodily injury or machine damage are identified by DANGERS and WARNINGS on the Nailer and in this
Manual.
• Never use this Nailer for applications other than those specified in this Manual.
• This tool has a FULL SEQUENTIAL ACTUATION ELECTRON CONTROL. First, press the push lever against the workpiece; next, pull the trigger
to drive the nail. Follow the same sequence to continue driving nails.
• This Nailer is powered by internal combustion device. This nailer shall only be used with dispensers for combustible gas which are listed in this
instruction manual.
• OPERATORS AND OTHERS IN WORK AREA MUST WEAR SAFETY GLASSES WITH SIDE SHIELDS. Eye protection must meet the
requirements of ANSI Standard Z87.1 and should have side shields for increased protection. If using this nailer at work, the employer you are
must be responsible for enforcing the use of eye protection equipment by the tool operator and all personnel in the work area.
• NEVER USE IN PRESENCE OF FLAMMABLE LIQUIDS OR GASES. This nailer must not be used in a combustible environment or in presence
of flammable liquids or gases, e.g., lacquer, paint, benzine, thinner or gasoline. This Nailer produces hot exhaust gases that may ignite
flammable materials and produce sparks during operation.
• DO NOT TOUCH AROUND THE EXHAUST OUTLET. This nailer produces hot exhaust gases that may ignite flammable materials. The push
lever and nose will get heated up and become hot after prolonged or rapid use. Do not touch with bare hands.
• EXPLOSION AND FIRE HAZARD. The fuel cell is an aerosol dispenser with flammable contents. Pressured container and the propellant will
remain in the fuel cell. Failure to follow instructions may result in explosion or fire. Keep the nailer, fuel cells and battery away from sunshine and
from temperature exceeding 120°F(50°C). Fuel cell and/or battery may burst, releasing flammable gas. Do not pierce or burn the container, even
after use. Do not incinerate, refill, reclaim or recycle the fuel cell. Do not spray to a naked flame or any incandescent material. Keep away from
ignitable sources No smoking. Keep out of the reach of children.-
• NEVER POINT TOOL AT YOURSELF OR OTHERS IN WORK AREA. Always assume the nailer contains fasteners. Never point the nailer at
yourself or others, whether it contains fasteners or not. If fasteners are mistakenly driven, it can lead to severe injuries. Never engage in
horseplay with the nailer. Respect the nailer as a working implement.
• KEEP FINGERS AWAY FROM TRIGGER WHEN NOT DRIVING FASTENERS TO AVOID ACCIDENTAL FIRING. Never carry the Nailer with
finger on trigger since you could drive a fastener unintentionally and injure yourself or someone else. Always carry the Nailer by the handle only.
• ALWAYS WEAR EAR AND HEAD PROTECTION. Always wear ear protection to protect your ears from loud noise. Always wear head protection
to protect your head from flying objects.
• USE OUTSIDE OR WELL-VENTILATED AREAS. This nailer exhausts carbon monoxide which are a danger to health when inhaled. This nailer
shall not be used in enclosed or poorly ventilated areas. Do not inhale.
• OPERATE WITHIN PROPER TEMPERATURE RANGE. The operating environment for this device is between 32°F (0°C) and 104°F (40°C) so
ensure to use within this temperature range. The device may fail to operate below 32°F (0°C) or above 104°F (40°C).
• STORE NAILER PROPERLY WITH FUEL CELL AND BATTERY REMOVED. When not in use, the Nailer, fuel cell and battery should be store
in tool case and in a dry place. Store indoors at temperature below 120°F (50°C). Keep the Nailer, fuel cell and battery out of direct sunlight and
out of in a vehicle. Keep out of reach of children. Look at the storage area.
• KEEP WORK AREA CLEAN. Cluttered areas invite injuries. Clear all work areas of unnecessary tools, debris, furniture, etc.
Specyfikacje produktu
| Marka: | Unimac |
| Kategoria: | zestaw do pielęgnacji paznokci |
| Model: | LXG3000 MKII |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Unimac LXG3000 MKII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje zestaw do pielęgnacji paznokci Unimac
18 Sierpnia 2024
Instrukcje zestaw do pielęgnacji paznokci
- zestaw do pielęgnacji paznokci Beurer
- zestaw do pielęgnacji paznokci Sanitas
- zestaw do pielęgnacji paznokci Livoo
- zestaw do pielęgnacji paznokci SilverCrest
- zestaw do pielęgnacji paznokci Easy Home
- zestaw do pielęgnacji paznokci Black & Decker
- zestaw do pielęgnacji paznokci BaByliss
- zestaw do pielęgnacji paznokci Homedics
- zestaw do pielęgnacji paznokci Remington
- zestaw do pielęgnacji paznokci Ozito
- zestaw do pielęgnacji paznokci RYOBI
- zestaw do pielęgnacji paznokci Medisana
- zestaw do pielęgnacji paznokci Cecotec
- zestaw do pielęgnacji paznokci Scarlett
- zestaw do pielęgnacji paznokci Clatronic
- zestaw do pielęgnacji paznokci Inventum
- zestaw do pielęgnacji paznokci Medel
- zestaw do pielęgnacji paznokci GA.MA
- zestaw do pielęgnacji paznokci Craftsman
- zestaw do pielęgnacji paznokci Lanaform
- zestaw do pielęgnacji paznokci ProfiCare
- zestaw do pielęgnacji paznokci Sport-Elec
- zestaw do pielęgnacji paznokci Vitek
- zestaw do pielęgnacji paznokci TensCare
- zestaw do pielęgnacji paznokci Rio
- zestaw do pielęgnacji paznokci Jata
- zestaw do pielęgnacji paznokci GlobalTronics
- zestaw do pielęgnacji paznokci Laica
- zestaw do pielęgnacji paznokci Lümme
- zestaw do pielęgnacji paznokci Carmen
- zestaw do pielęgnacji paznokci Valera
- zestaw do pielęgnacji paznokci Style Me Up
- zestaw do pielęgnacji paznokci Bella Pure
- zestaw do pielęgnacji paznokci BoraPora
- zestaw do pielęgnacji paznokci Paslode
Najnowsze instrukcje dla zestaw do pielęgnacji paznokci
9 Października 2024
8 Października 2024
5 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
2 Października 2024
2 Października 2024
1 Października 2024