Instrukcja obsługi Truetone 1 Spot Pro CS12

Truetone nieskategoryzowany 1 Spot Pro CS12

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Truetone 1 Spot Pro CS12 (4 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
www.Truetone.com
IMPORTANT SAFETY INSTRUCTIONS
1. All the safety and operating instructions should be read before this
product is operated. Keep these instructions for future reference.
2. Pay attention to all warnings on the power supply and in the operating
instructions.
3. WARNING: Do not use this device near water or any other liquid.
4. Clean only with dry cloth.
5. Do not block any ventilation openings.
6. Do not use this device near any heat sources.
7. Do not remove the power plug grounding pin on the input cable.
8. Protect all input and output power cables from being walked on or
pinched.
9. Only use attachments/accessories specified by the manufacturer.
10. Use only with the brackets and screws provided with this power
supply.
11. Unplug this device during lightning storms or when unused for long
periods of time.
12. Refer all repairs to qualified personnel at Truetone or an authorized
Truetone distributor. Under no circumstances should the power
supply be opened by the user.
13. This lightning flash with arrowhead symbol within an equilateral
triangle is intended to alert the user to the presence of non-insulated
“dangerous voltage” within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of electric shock.
- WARNING: To reduce the risk of electric shock, do not remove cover
(or back) as there are no user-serviceable parts inside. Refer
servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to
alert the user to the presence of important operating and
maintenance instructions in the literature accompanying the
appliance.
14. The maximum ambient temperature should not exceed 35 degree C.
15. Date code: YYMM, YY means year, MM means month. For example:
1412 represents Year 2014, December.
Owners Manual
CS 12 - pure isolated power
Need some great pedals to go
with your 1 SPOT Pro?
Check out Truetone
*
pedals at
Truetone.com
* Truetone was formerly known as Visual Sound; the makers
of Jekyll & Hyde, Route 66, H2O, Visual Volume and
The 1 SPOT!
Mounting your 1 SPOT Pro under a Pedaltrain
®
pedalboard:
The 1 SPOT Pro comes with 2 metal brackets, 4 black machine screws and 4
silver thread-forming screws. The black machine screws are for attaching the
metal brackets to the sides of the 1 SPOT Pro, and the thread-forming screws
are for attaching the brackets to the Pedaltrain
®
, as shown below. There is no
need to pre-drill holes for the screws if you are using a powered screwdriver.
Make sure the 1 SPOT Pro is
slanted during mounting, so that
the IEC input socket is in between the
rails of the Pedaltrain. To help position it
correctly, you can put a 9V battery under the
1 SPOT Pro (center-back of the unit), which
will raise the back to the proper height the
battery is only acting as a temporary spacer.
After the 4 thread-forming screws are installed, push the 9V battery out.
Congratulations on your purchase of the 1 SPOT Pro CS12 Power Supply by
Truetone! The 1 SPOT Pro CS12 provides 12 outputs to power just about any
effect pedal. All 12 outputs are completely isolated, regulated, and filtered to
provide quiet and safe operation for your valuable effects pedals.
The 1 SPOT Pro CS12 contains the following:
1 SPOT Pro CS12 Power Supply
Power cables:
(2) DC26 (5.5x2.1mm barrel plugs; 26” (660mm) – Purple
(2) DC22 (5.5x2.1mm barrel plugs; 22” (559mm) – Blue
(4) DC18 (5.5x2.1mm barrel plugs; 18” (457mm) – White
(3) DC12 (5.5x2.1mm barrel plugs; 12” (305mm) – Yellow
(1) AC21 (5.5x2.5mm barrel plugs; 21” (533mm) – Red
Converter Plugs:
(1) CL6 – Green
(1) CYR – Red
(2) C35 – Black
(1) CBAT – Black battery clip
The proper powering of effects pedals is much misunderstood, but necessary
knowledge that every effect user must have. It is the difference between proper
functionality of your pedal, or potentially damage to it. To properly use the 1
SPOT Pro CS12 along with your effects devices, you must know both the power
requirements of your pedals, and the capabilities of the 1 SPOT Pro CS12
power supply. We will concentrate on the latter first.
Specifications of the 1 SPOT Pro CS12:
Input: 100-127V~/0.7A, 50/60Hz US; 200-240V~/0.35A, 50/60Hz Europe/UK
Outputs: 12 Outputs are as shown below: (Outputs 3-7 are switchable)
Note: These numbers do not appear on the actual unit.
The bottom panel of the 1 SPOT Pro CS12 contains 5-mini switches that change
the voltage output of outputs 3-7.
Switch 1 corresponds to Output-3 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 100mA
Switch 2 corresponds to Output-4 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 100mA
Switch 3 corresponds to Output-5 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 100mA
Switch 4 corresponds to Output-6 and allows it to be switched between
either 9Vdc (OFF) or 12Vdc (ON) at 100mA
Switch 5 corresponds to Output-7 and allows it to be switched between
either 9Vdc at 100mA (OFF) or 4-9Vdc (ON) via voltage mini knob
at 100mA
Input Voltage Selector Switch:
The back panel of the 1 SPOT Pro CS12 has a 2-position 115/230V~ switch that
allows the 1 SPOT Pro CS12 to be used in most countries. Using the Warning:
unit at the wrong setting will cause damage to both the 1 SPOT Pro CS12, and
any effect plugged into output 12. Make sure the switch setting matches the
voltage coming out of the wall outlet (+/- 10V~ is OK).
Which output and settings do I use for my pedals?
It is important for you to know the power requirements for your pedal. For every
pedal that you are going to power via the 1 SPOT Pro CS12, you need to know
the following:
1. What is the voltage required by the pedal?
2. Does the pedal require AC or DC voltage?
3. What is the polarity of the pedal? (Center pin positive or negative.)
Note: This symbol
indicates DC voltage.
These questions can usually be answered by:
1. Inspecting the pedal itself near the power jack.
2. Referring to the owner’s manual.
3. Checking online, or contacting the manufacturer.
4. If your pedal can be powered by a 9Vdc battery, it can
be powered by one of the 9Vdc outputs (exception being
the Boss ACA pedals, see below).
: Do not use this output except with pedals
that are specifically mentioned in this manual.
Truetone is not liable for misuse of this 9Vac output.
Note: The first 11 outputs feature jacks with a standard 5.5x2.1mm barrel connector,
while the 9Vac equipped output 12 has a 5.5x2.5mm barrel to help prevent plugging this
output into a normal 9Vdc pedal and potentially causing damage.

Specyfikacje produktu

Marka: Truetone
Kategoria: nieskategoryzowany
Model: 1 Spot Pro CS12

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Truetone 1 Spot Pro CS12, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje nieskategoryzowany Truetone

Truetone

Truetone mA meter Instrukcja

30 Maja 2024
Truetone

Truetone 1 Spot Pro CS12 Instrukcja

30 Maja 2024
Truetone

Truetone 1 Spot Voltage Doubler Instrukcja

30 Maja 2024
Truetone

Truetone 1 Spot Pro CS6 Instrukcja

30 Maja 2024

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Asko

Asko DBI644MIB.S.TW/1 Instrukcja

28 Października 2024
Asko

Asko DFS233IB.S.TW/1 Instrukcja

28 Października 2024
Emko

Emko EZM-9920 Instrukcja

27 Października 2024
Emko

Emko ESM-3712-H Instrukcja

27 Października 2024
Emko

Emko ATS-10 Instrukcja

27 Października 2024
Emko

Emko EAOM-11.2 Instrukcja

27 Października 2024
Emko

Emko EPM-3790 Instrukcja

27 Października 2024
Emko

Emko EPM-7790 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux IAN 108340 Instrukcja

27 Października 2024
Livarno Lux

Livarno Lux HG06009A-BS Instrukcja

27 Października 2024