Instrukcja obsługi TRENDnet TPL-422E2K


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TRENDnet TPL-422E2K (3 stron) w kategorii adapter sieciowy. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Powerline 1300 AV2 Adapter Kit
TPL-422E2K (v1.0R)
TRENDnet’s Powerline 1300 AV2 Adapter Kit, model TPL-422E2K, comes with two Powerline adapters to create a high-speed Powerline 1300 network
using your home’s existing electrical system. Two adapters are needed to start a network. TRENDnet adapters are protected with 128-bit AES Encryption.
Plug in the first adapter and network it to your existing router. Plug in other adapters on the same electrical system and they auto-connect to the first adapter
for instant internet access.
Includes two TPL-422E adapters
Powerline 1300 networking over existing electrical lines
Enhanced Powerline performance and coverage from MIMO with Beamforming technology
Encrypted TRENDnet adapters auto-connect out of the box
Gigabit port for high-speed connectivity
Powerline range up to 300m (984 ft.)
Two Powerline adapters are required to start a network
Cross compatible with Powerline 1200, 600, 500, and 200 adapters
TPL-422E2K
Simple Plug-in Installation
No configuration needed – simply plug in
TRENDnet Powerline adapters and they
will auto-connect out of the box.
High-Speed Powerline 1300
Powerline 1300 technology and a gigabit
port deliver fast and stable networking to
seamlessly connect devices and stream
4K video.
MIMO Technology
Multiple Input Multiple Output (MIMO)
Powerline with Beamforming technology
uses live, neutral, and ground wires to
increase performance between adapters.
Networking Solution
Sync Button
Press the Sync button to change existing
Powerline encryption keys
Poweline 1300
Powerline 1300 technology delivers fast
and stable networking to seamlessly
connect devices and stream 4K video.
Gigabit Port
Gigabit port for computers, smart TVs, or
other network enabled devices
Cross Compatibility
Cross compatible with Powerline 1200,
600, 500, and 200 adapters
MIMO with Beamforming Technology
Multiple Input Multiple Output (MIMO)
Powerline with Beamforming technology
uses live, neutral, and ground wires to
increase performance between adapters.
Expandable
Use up to 8 adapters on a single
Powerline network
Easy Installation
TRENDnet adapters auto-connect out of
the box
128-bit AES Encryption
Powerline communication is protected
with 128-bit AES encryption
TPL-422E2K
Encryption 128-Bit AES (Advanced Encryption Standard)
Powerline Nodes Up to 8 (max.)
Overlapping
Powerline
Networks
Up to 4 (per electrical system)
* Maximum of 8 adapters (nodes) recommended for streaming video across your network.
** 1.3 Gbps is the maximum theoretical Powerline data rate when connected to another Powerline 1300 device. Data throughput may vary by circuit wire conditions. If an electrical system does not have
a grounded connection, the theoretical networking speed is reduced to 650 Mbps.
*** Powerline communication works on a single electrical system. (Usually controlled by a single distribution panel). Power strip, GFCI outlets, and AFCI circuit breakers may degrade Powerline network
signals.
20675 Manhattan Place • Torrance • CA 90501 • USA • T: 1-888-326-6061 • F: 1-310-961-5511 • sales@trendnet.com • www.TRENDnet.com
TRENDnet is a registered trademark. Other Brands and product names are trademarks of their respective holders. Information provided in this document pertain to TRENDnet products and is subject
to change at any time, without notice. For the most recent product information please visit http://www.trendnet.com. Copyright © TRENDnet. All Rights Reserved.
Updated: 2/21/2018
TPL-422E2K
Standards IEEE 802.3
IEEE 802.3u
IEEE 802.3x
IEEE 802.3ab
IEEE 1901
IEEE 1905.1
Device Interface 1 x Gigabit LAN port
Sync button
Reset button
LED indicators
Power plug North America Type B (NEMA 5–15)
Frequency Band 2 – 67.5MHz
Modulation/
Protocol
OFDM, 4096/1024/256/64/16/8-QAM, QPSK, BPSK, ROBO,
HS-ROBO, Mini-ROBO
• CSMA/CA
Data PHY Rate Up to 1300Mbps
Networking
Distance
Powerline: Up to 300m (980ft.) linear distance over electrical
power lines***
Specifications
Operating
Humidity
Max. 90 % non-condensing
PACKAGE CONTENTS
2 x TPL-422E
Quick Installation Guide
CD-ROM (Utility & User’s Guide)
2 x Network cable (1.5 m/5 ft.)
Special Features Auto-connects to other TRENDnet Powerline adapters
IPv6 support
IGMP / MLDv2 Streams
Optional Utility: OS
Compatibility
• Windows®10, 8.1, 8, 7, Vista, XP
Power Input: 100 - 240V AC, 50-60Hz
Consumption: Active mode: 4W (max.); Standby mode: 0.5W
(max.)
Operating
Temperature
0 – 50°C (32 – 122°F)
Certifications •FCC
• IC
• ETL
Dimensions •58 x 77 x 65 mm (2.3 x 3.0 x 2.6 in.)
Weight •108g (3.8 oz.)
Warranty •3 year


Specyfikacje produktu

Marka: TRENDnet
Kategoria: adapter sieciowy
Model: TPL-422E2K
Kolor produktu: Biały
Częstotliwość wejściowa AC: 50 - 60 Hz
Napięcie wejściowe AC: 100 - 240 V
Wysokość produktu: 77 mm
Szerokość produktu: 58 mm
Głębokość produktu: 65 mm
Waga produktu: 108 g
Ilość na paczkę: - szt.
Certyfikaty: FCC\nIC\nETL
Standardy komunikacyjne: IEEE 1901, IEEE 1911.1, IEEE 802.3, IEEE 802.3ab, IEEE 802.3u, IEEE 802.3x
Maksymalna szybkość przesyłania danych: 1300 Mbit/s
Modulacja: 8-DPSK, 16PSK, 64-QAM, 256-QAM, 1024-QAM, 4096-QAM, BPSK, QPSK, ROBO
Przewodowa sieć LAN: Tak
Wbudowane gniazdko elektryczne: Nie
Standard PowerLine: HomePlug AV2
Szyfrowanie / bezpieczeństwo: 128-bit AES
Maksymalny zasięg działania: 300 m
Typ interfejsu Ethernet LAN: Gigabit Ethernet
Instrukcja szybkiej instalacji: Tak
Wtyczka: Typu B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TRENDnet TPL-422E2K, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje adapter sieciowy TRENDnet

Instrukcje adapter sieciowy

Najnowsze instrukcje dla adapter sieciowy