Instrukcja obsługi TP-Link Tapo C400S2

TP-Link kamera Tapo C400S2

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla TP-Link Tapo C400S2 (3 stron) w kategorii kamera. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/3
*Images may dier from your actual product.
©2022 TP-Link 7106509765 REV1.0.0
03 / Set Up Hub
and Camera
1. Get the Tapo app from the App Store or
Google Play.
1. Twist anti-clockwise and then pull to remove
the cover of the camera. Insert the battery.
Note:
1. Charge the battery before use. It will take about 5~6 hours.
2. If you want to use the camera while charging the battery, we
recommend purchasing another battery for your convenience.
2. Align the indicator line on the cover with the
arrow icon on the camera body.
Press and rotate clockwise to the lock position
to replace the cover.
2. Follow the instructions in the Tapo app to set
up your hub.
3. Follow the instructions in the Tapo app to set
up your camera.
OR
05 / Mount
to the Wall
04 / Installation
Options
Stick the mounting template
to the desired mounting
place. Drill 3 holes according
to the template.
1. Drill HolesOption 1. Set on a Table
Install
Option 2. Mount to the Wall
01 / Charge the
Battery
Method 2: Battery Inside Camera
*Check the battery status in the Tapo app after setup.
02 / Insert the
Battery
2. Install the Bracket
Insert three anchors into
the holes and use the
screws to ax the bracket
over the anchors.
3. Install the Camera
Install the camera on the
mounting bracket, and
adjust the camera angle.
Rotate to secure
the bracket
Rotate after installing
Rotate to secure
the bracket
Rotate after installing
Install
5V USB Charger
RES
SYNC
ET
/
Solid amber
Solid green
Method 1: Battery
5V USB Charger
Charging:
Fully charged:
Closed
Open
Smart Wire-Free Security
Camera System
Quick Start Guide
1
2
• Do not use damaged charger or USB cable to charge the device.
• Do not use any other chargers than those recommended.
• Do not use the device where wireless devices are not allowed.
• Adapter shall be easily accessible.
• Use only power supplies which are provided by manufacturer and in
the original packing of this product. If you have any questions, please
don't hesitate to contact us.
• Keep the device away from re or hot environments. DO NOT
immerse in water or any other liquid.
• Do not disassemble, repair or modify the product.
• Do not place near automatically controlled devices such as re
alarms. Radio waves emitted from this product may cause such
devices to malfunction resulting in an accident.
• Observe restrictions on using wireless products in fuel depots,
chemical plants or when blasting operations are in progress.
• Do not use liquid to clean the product. Only use a dry cloth.
• Never put metal objects inside the product. If a metal object enters
the product turn o the circuit breaker and contact an authorised
electrician.
• This product is not intended to be used when providing medical care.
Consult the manufacturer of any personal medical devices, such as
pacemakers or hearing aids to determine if they are adequality
shielded from external RF (radio frequency) energy.
• Do not use this product in health care facilities. Hospitals or health
care facilities may be using equipment that could be sensitive to
external RF energy.
• Do not place heavy objects on top of the product.
• When you leave the product unused for a long time unplug the
product from the power outlet.
• Product should be kept away from heat sources such as radiators,
cookers etc. - it should not be placed in places where the
temperature is less than -20 degrees or greater than 45 degrees.
• This product may interfere with other electronic products such as TV,
radios, personal computers, phones or other wireless devices.
• Always follow the local waste and recycle laws when you get rid of the
used battery.
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of directives
2014/53/EU, 2009/125/EC, 2011/65/EU and (EU)2015/863.
The original EU declaration of conformity may be found at
https://www.tapo.com/support/ce/
TP-Link hereby declares that the device is in compliance with the
essential requirements and other relevant provisions of the Radio
Equipment Regulations 2017.
The original UK declaration of conformity may be found at
https://www.tapo.com/support/ukca/
Camera Appearance Hub Appearance Light Indications
Hub Status LED
Solid amber
Blinking red quickly
Solid red
Solid green
Blinking green quickly
Starting up
Connected to the cloud
Connected to router
Hub resetting
Hub updating
Blinking red and green Ready for setup
Blinking green slowly Pairing
Camera Status LED
Blinking red and green
Solid Red
Blinking red once a minute
Blinking green quickly Camera updating
Blinking red quickly Camera resetting
Ready for pairing
Pairing
Blinking red slowly
Blinking green slowly
Solid green Connected to the cloud
Solid amber Connected to the hub
Starting up
Low battery
Oine
CAUTION!
Avoid replacement of a battery with an incorrect type that can
defeat a safeguard.
Avoid disposal of a battery into re or a hot oven, or
mechanically crushing or cutting of a battery, that can result in
an explosion.
Do not leave a battery in an extremely high temperature
surrounding environment that can result in an explosion or the
leakage of ammable liquid or gas; Do not leave a battery
subjected to extremely low air pressure that may result in an
explosion or the leakage of ammable liquid or gas.
CAUTION!
Risk of re or explosion
if the battery is replaced by an incorrect type
Safety Information
Camera Operating Temperature: -20 °C ~ 45°C (-4°F ~ 113°F)
Camera Operating Humidity: 10%~90%RH, Non-condensing
Hub Operating Temperature: 0 °C ~ 40°C (32°F ~ 104°F)
Hub Operating Humidity: 10%~90%RH, Non-condensing
Please read and follow the above safety information when
operating the device. We cannot guarantee that no accidents or
damage will occur due to improper use of the device. Please use
this product with care and operate at your own risk.
For technical support, user guides,
FAQs, warranty and more, please visit
www.tapo.com/support/
▲microSD card not included.
1SYNC Button
Press to pair with the camera, or silence the hub when it rings.
2RESET
Use a pin to press and hold for about 5 seconds until the hub
LED quickly blinks red to reset the hub.
3microSD Card Slot
Insert a microSD card to record camera videos locally.
Initialize the microSD card within the Tapo app rst.
4Status LED
Indicate the status of your hub.
Indicate the status of your camera. While the camera is powered on:
Front Back
Micro SD
1 2 3
4
1
3Motion Sensor
4Status LED
2Light Sensor
Lens
5Microphone
SYNC/RESET Button
7
Press for 1 second: Pair with the hub
Press and hold for about 5 seconds: Reset the camera
RES
SYNC
ET
/
7
42 5
1
3

Specyfikacje produktu

Marka: TP-Link
Kategoria: kamera
Model: Tapo C400S2

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z TP-Link Tapo C400S2, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera TP-Link

TP-Link

TP-Link Tapo C420 Instrukcja

26 Września 2024
TP-Link

TP-Link Tapo C400S2 Instrukcja

11 Września 2024
TP-Link

TP-Link Tapo C225 Instrukcja

11 Września 2024
TP-Link

TP-Link Tapo C310 Instrukcja

3 Lipca 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Trust

Trust Powerc@m 820 Instrukcja

15 Października 2024
AVerMedia

AVerMedia Live Streamer CAP 4K BU113 Instrukcja

15 Października 2024
Bushnell

Bushnell Trophy Cam 119456 Instrukcja

13 Października 2024
Konica Minolta

Konica Minolta Hi-Matic GF Instrukcja

11 Października 2024
Easypix

Easypix KiddyPix Blizz Instrukcja

10 Października 2024
Samsung

Samsung DV1506F Instrukcja

9 Października 2024
Kogan

Kogan KAUNCAMBLUA Instrukcja

9 Października 2024
Polaroid

Polaroid 600 Series Instrukcja

9 Października 2024
Kogan

Kogan KAKIDINCMRB Instrukcja

8 Października 2024
UniView

UniView IPC3615SB-ADF28(40)KM-I0 Instrukcja

8 Października 2024