Instrukcja obsługi Polaroid Now Generation 3

Polaroid kamera Now Generation 3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Polaroid Now Generation 3 (8 stron) w kategorii kamera. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
User Manual 1
Film Counter Display
Camera Functions
Flash
Shutter Button
Film Shield
Light Meter
Camera Lens
Mode Indicator
+ Button*
Single Press: Self Timer
Double Press: Double Exposure
Long Press: Custom shortcut
Film Door Button
Viewnder
Flash ON | OFF Button
Camera ON | OFF Button
Film Counter LED
Battery Level Indicator
Battery full
Battery half full
Battery low
USB-C Charging Port
Unlit Camera is off →
0 → No lm
1-8 → Photos remaining
- → Darkslide is inside
1 → Exposure 1 of Double Exposure
2 → Exposure 2 of Double Exposure
door → Film door open
L → Lens select failure
c → Object too close
F → Object too far
b → Battery Low (ashing 5x)
→ Brighter +½ EV
→ Neutral
→ Darker -½ EV*The + LED is on when the Polaroid App is connected
2
Getting Started
1. Open the Polaroid Now box and check that you have
everything you need:
• Polaroid Now Camera
• Quick Start Guide
• Camera Wrist Strap
• Safety & Compliance booklet
2. Charge your camera
For safe transportation, the Polaroid NOW+ won’t be fully
charged when you receive it. To charge it, use any standard
USB-C charger. (5V/1A). We don’t recommend charging
via a laptop. The battery level indicator LED will blink while
the camera is plugged in and charging. This LED will turn
off once the camera is fully charged. A full charge through
a wall socket takes about 2 hours. A fully charged Polaroid
NOW+ will have enough power to shoot 15 packs of lm,
depending on usage. Remember to turn off the camera
when you’re not using it to save battery life.
3. Attach your wrist strap
4. Find your instant lm
This camera uses Polaroid i-Type and 600 instant lm. You
can shop it here.
How To Take
Your First Photo
1. Turn on the Polaroid NOW+ camera.
Press the ON | OFF button until the lm counter display
lights up. This display will show how many photos are left. It
should be at ‘0’ because there is no lm in the camera.
2. Insert the lm pack.
Press the lm door button and pull the door open. Hold the
lm with the darkslide facing up. Slide the thin end of the
cassette in rst with the tab facing towards you. Push the
cassette all the way into the camera until it clicks. Leave the
pull tab on, as you will need that later to remove the empty
lm pack.
Close the lm door until it clicks.
The darkslide covered by the lm shield will eject. Do not
pull on the lm shield. Remove the darkslide and allow the
lm shield to roll back in. This retractable shield is designed
to protect photos from light as they develop, so don’t
remove it. If the darkslide has not ejected, remove the lm
and reinsert it.
To ensure the camera displays the correct number of
photos, always nish the lm before inserting a fresh pack.
If you decide to switch the lm pack anyway, be aware
that this will expose all the photos to light, and they will be
unusable.
You’re now ready to take your rst photo.
3. Aim the camera at your subject.
Make sure you are at least 45cm (1.47ft) away from your
subject.
The Polaroid NOW+ uses a viewnder located on the left
side of the lens barrel. To aim at your subject, align your eye
with the viewnder barrel and use the image you see to help
compose your shot. Be aware that your photo will not reect
exactly what you see through the viewnder. For subjects
closer than 1.2m (5.24ft), adjust your aim slightly up and to
the left.
It’s possible to focus on your subject, and then recompose
your frame. To do this, half-press the shutter button to lock
focus and exposure. Adjust your composition, and then fully
press the shutter button to take the photo. Be careful not to
cover the ash or the photo eject slot with your ngers.
4. Press the shutter button.
The photo will eject from the slot at the front of the camera.
You will see that the photo will be covered with a lm shield
to protect it from light. Please don’t pull on the lm shield.
5. Remove the photo.
Leave your photo under the lm shield for about 5 seconds.
Gently lift the lm shield so it rolls back into the camera.
Remove the photo and place it face down to continue
shielding it from light as it develops. And no matter what
that song says, don’t shake the photo! Check the back of
the lm packaging for the correct developing times.
6. Turn the camera off.
Press the ON | OFF button to turn off the Polaroid NOW+. 3

Specyfikacje produktu

Marka: Polaroid
Kategoria: kamera
Model: Now Generation 3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Polaroid Now Generation 3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera Polaroid

Polaroid

Polaroid Now Generation 3 Instrukcja

9 Kwietnia 2025
Polaroid

Polaroid Originals Lab Instrukcja

6 Grudnia 2024
Polaroid

Polaroid 600 Series Instrukcja

9 Października 2024
Polaroid

Polaroid I-2 Instrukcja

2 Października 2024
Polaroid

Polaroid Go 2 Instrukcja

29 Września 2024
Polaroid

Polaroid Impulse 600 series Instrukcja

29 Września 2024
Polaroid

Polaroid Instant I-2 Instrukcja

29 Września 2024
Polaroid

Polaroid SLR 690 Instrukcja

28 Września 2024
Polaroid

Polaroid NOW+ Generation 2 Instrukcja

25 Września 2024
Polaroid

Polaroid NOW Generation 2 Instrukcja

25 Września 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Reolink

Reolink NVC-D12M Instrukcja

9 Kwietnia 2025
Panasonic

Panasonic Lumix DC-TZ91 Instrukcja

3 Kwietnia 2025
Vemer

Vemer EasyEye.NOW Instrukcja

2 Kwietnia 2025
Maginon

Maginon WK-7 HD Instrukcja

1 Kwietnia 2025
Rollei

Rollei HD-30 Instrukcja

29 Marca 2025
Rollei

Rollei Security Cam 1080p Instrukcja

29 Marca 2025
Syrp

Syrp Magic Carpet PRO Instrukcja

27 Marca 2025
Aida

Aida HD-NDI-X20 Instrukcja

27 Marca 2025
Hasselblad

Hasselblad CFV II 50c Instrukcja

27 Marca 2025
Marshall Electronics

Marshall Electronics CV228 Instrukcja

12 Marca 2025