Instrukcja obsługi Totolink X6100UA

Totolink Karta sieciowa/adapter X6100UA

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Totolink X6100UA (2 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Quick Installation Guide

AX1800 Dual Band Wireless USB Card

Model: X6100UA

Information in this docutment is subject to change without prior notice.

Double-click the CD drive letter,

choose the corresponding model

with correct system type, then

click “Install”.

Remove disks from drives, and then click “Finish” to complete

setup. The computer will restart soon.

If you want to restart your computer later, select the second

item and click “Finish”.

Manufacturer: ZIONCOM ELECTRONICS (SHENZHEN) LTD.

Address: Room 702, Unit D, 4 Building Shenzhen Software Industry Base, Xuefu Road, Nanshan District, Shenzhen, Guangdong, China

Put into the CD.

Waiting for the installation.

802.11ax WLAN Adapter

Please insert the USB Card to your computer’s USB interface, then install

the driver.

1. Connect the USB Card to the computer

2. Install the Driver to Your Computer

Please turn off the firewall and anti-virus

software temporarily when installing the driver.

Method 1: Install the driver using a disk (If your computer does not

have drives, please use Method 2 to install the driver).

X6100UA

Method 2: Download the driver from the website

X6100UA_Windows 10_8_8.1_7 Driver

X6100UA

X6100UA_Datasheet

X6100UA_QIG

X6100UA_Driver

1.Open a computer browser and enter: in the address http://totolink.net

bar, enter the model: X6100UA in the search bar at the upper right corner,

and then click the search symbol to search.In the search results page, click

the USB card picture to enter the page of details.

2. Enter the download page as shown below, click the download symbol

corresponding to the driver file, and then download the USB card driver.

3. After unzipping the file, double-click to open the setup file: , wait for a moment, and click "Finish".Setup.exe

3. Connect to Wireless Router (For Windows 10)

Enter password of the

Wi-Fi.(P4)

Search for 2.4GHz or 5GHz

Wi-Fi SSID.(P2)

Wi-Fi connected

successfully.(P5)

Choose your Router’s

SSID, click Connect.

(P3)

(P5)(P2) (P3) (P4)

1Click the bottom on the

lower right of your PC.

FCC warning

FCC Statement

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency

energy and, if not installed and used in accordance with the instructions, may

cause harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If this

equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of the following

measures:

—Reorient or relocate the receiving antenna.

—Increase the separation between the equipment and receiver.

—Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

—Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to

the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Caution

Any changes or modifications not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an

uncontrolled environment.

This transmitter must not be co-located or operating in conjunction with any

other antenna or transmitter.

This equipment should be installed and operated with minimum distance

20cm between the radiator& your body.

4. FAQs

1. Why after installing USB card and driver, the lower right corner of

computer still prompt USB card does not exist?

It is possible that the computer did not recognize your USB card, please

change the USB interface and try it again. Another possibility is the USB

card was blocked by the anti-virus software during the process of installing

the driver. It is recommended to close the firewall and anti-virus software

temporarily when installing the driver, and open it after the driver is

installed.

2. After inserting the wireless network card to install the driver, the

icon is displayed, the network cannot be connected, and the

network is unavailable.

Right-click the open icon , select "Open and Network Sharing

Center", open "Change Adapter Settings" in the upper-left corner of

the page, and confirm that the wireless network card adapter is on.

If it is closed, select the corresponding network card and right-click

"Enable".

3. How to place the antenna to get the best wireless signal?

For the best Internet experience, keep the NIC antenna perpendicular

to the horizontal plane.

Specyfikacje produktu

Marka:	Totolink
Kategoria:	Karta sieciowa/adapter
Model:	X6100UA

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Totolink X6100UA, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Karta sieciowa/adapter Totolink

Totolink N150USM Instrukcja

16 Września 2024

Totolink U2500 Instrukcja

3 Września 2024

Totolink A600UB Instrukcja

2 Września 2024

Totolink A1900PE Instrukcja

30 Sierpnia 2024

Totolink X3000PE Instrukcja

29 Sierpnia 2024

Totolink A1000UA Instrukcja

24 Sierpnia 2024

Totolink N150UH Instrukcja

17 Sierpnia 2024

Totolink X6100UA Instrukcja

6 Sierpnia 2024

Totolink A2000UA Instrukcja

4 Lipca 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

ZyXEL WBE510D Instrukcja

14 Stycznia 2025

StarTech.com 107B-USB-HDMI Instrukcja

14 Stycznia 2025

StarTech.com ST1000SPEXD4T Instrukcja

8 Stycznia 2025

Edimax EU-4307 V2 Instrukcja

29 Grudnia 2024

StarTech.com O1210I-NETWORK-CARD Instrukcja

28 Grudnia 2024

Micro Connect MC-POEADAPTER-USB-C Instrukcja

27 Grudnia 2024

Lindy 43237 Instrukcja

27 Grudnia 2024

Lindy 43247 Instrukcja

27 Grudnia 2024

Akasa AK-PCCE25-01 Instrukcja

26 Grudnia 2024

OpenVox AE2410E40 Instrukcja

26 Grudnia 2024