Instrukcja obsługi Texas Instruments SN74HC241N


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Texas Instruments SN74HC241N (27 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 26 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/27
SNx4HC241 Octal Buffers and Line Drivers With 3-State Outputs
1 Features
Wide operating voltage range of 2 V to 6 V
High-current outputs drive up to 15 LSTTL loads
Low power consumption, 80-μA max ICC
Typical tpd =11 ns
±6-mA output drive at 5 V
Low input current of 1 μA max
3-state outputs drive bus lines or buffer memory
address registers
2 Description
These octal buffers and line drivers are designed
specifically to improve both the performance and
density of 3-state memory address drivers, clock
drivers, and bus-oriented receivers and transmitters.
The HC241 devices are organized as two 4-bit
buffers/drivers with separate output-enable (1OE and
2OE) inputs. When 1OE is low or 2OE is high, the
device passes noninverted data from the A inputs to
the Y outputs. When 1OE is high or 2OE is low, the
outputs for the respective buffers/drivers are in the
high-impedance state.
Device Information
PART NUMBER PACKAGE(1) BODY SIZE (NOM)
SN74HC241DW SOIC (20) 12.80 mm × 7.50 mm
SN74HC241N PDIP (20) 25.40 mm × 6.35 mm
SN74HC241NSR SO (20) 15.00 mm × 5.30 mm
SN74HC241PW TSSOP (20) 6.50 mm × 4.40 mm
SN54HC241J CDIP (20) 26.92 mm × 6.92 mm
SNJ54HC241FK LCCC (20) 8.89 mm × 8.45 mm
(1) For all available packages, see the orderable addendum at
the end of the data sheet.
Functional Block Diagram
SN54HC241, SN74HC241
SCLS300D – JANUARY 1996 – REVISED JANUARY 2022
An IMPORTANT NOTICE at the end of this data sheet addresses availability, warranty, changes, use in safety-critical applications,
intellectual property matters and other important disclaimers. PRODUCTION DATA.
Table of Contents
1 Features............................................................................1
2 Description.......................................................................1
3 Revision History.............................................................. 2
4 Pin Configuration and Functions...................................3
5 Specifications.................................................................. 4
5.1 Absolute Maximum Ratings........................................ 4
5.2 Recommended Operating Conditions(1) .................... 4
5.3 Thermal Information....................................................4
5.4 Electrical Characteristics.............................................5
5.5 Switching Characteristics ...........................................5
5.6 Switching Characteristics............................................6
5.7 Operating Characteristics........................................... 6
6 Parameter Measurement Information............................ 7
7 Detailed Description........................................................8
7.1 Overview..................................................................... 8
7.2 Functional Block Diagram........................................... 8
7.3 Device Functional Modes............................................8
8 Power Supply Recommendations..................................9
9 Layout...............................................................................9
9.1 Layout Guidelines....................................................... 9
10 Device and Documentation Support..........................10
10.1 Receiving Notification of Documentation Updates..10
10.2 Support Resources................................................. 10
10.3 Trademarks.............................................................10
10.4 Electrostatic Discharge Caution..............................10
10.5 Glossary..................................................................10
11 Mechanical, Packaging, and Orderable
Information.................................................................... 10
3 Revision History
NOTE: Page numbers for previous revisions may differ from page numbers in the current version.
Changes from Revision C (August 2003) to Revision D (January 2022) Page
Updated the numbering, formatting, tables, figures, and cross-references throughout the document to reflect
modern data sheet standards............................................................................................................................. 1
SN54HC241, SN74HC241
SCLS300D – JANUARY 1996 – REVISED JANUARY 2022 www.ti.com
2Submit Document Feedback Copyright © 2022 Texas Instruments Incorporated
Product Folder Links:
SN54HC241 SN74HC241
4 Pin Configuration and Functions
J, DW, N, NS, or PW package
20-Pin CDIP, SOIC, PDIP, SO, or TSSOP
Top View
FK Package
20-Pin LCCC
Top View
www.ti.com
SN54HC241, SN74HC241
SCLS300D – JANUARY 1996 – REVISED JANUARY 2022
Copyright © 2022 Texas Instruments Incorporated Submit Document Feedback 3
Product Folder Links:
SN54HC241 SN74HC241


Specyfikacje produktu

Marka: Texas Instruments
Kategoria: nieskategoryzowany
Model: SN74HC241N
Wysokość produktu: 4.57 mm
Szerokość produktu: 26.92 mm
Głębokość produktu: 6.6 mm
Szerokość opakowania: 13.97 mm
Wysokość opakowania: 11.23 mm
Głębokość opakowania: 506 mm
Ilość na paczkę: 20 szt.
Zakres temperatur (eksploatacja): -40 - 85 °C
Liczba styków: 20
Zakres temperatur (przechowywanie): -65 - 150 °C
Model: Logiczny układ scalony
Rodzaj opakowania: PDIP
Szerokość (z bolcami): 26.92 mm
Głębokość (z bolcami): 10.92 mm
Wysokość (z bolcami): 8.26 mm

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Texas Instruments SN74HC241N, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje nieskategoryzowany Texas Instruments

Instrukcje nieskategoryzowany

Najnowsze instrukcje dla nieskategoryzowany

Meec Tools

Meec Tools 010-084 Instrukcja

6 Października 2024
Outwell

Outwell Scenic Road 250 Instrukcja

5 Października 2024
Impact

Impact QuikBalance Instrukcja

4 Października 2024
Impact

Impact CA-112 Instrukcja

4 Października 2024
Impact

Impact LS-BHA Instrukcja

4 Października 2024
Impact

Impact LKB-5C Instrukcja

4 Października 2024
Impact

Impact RST-001 Instrukcja

4 Października 2024