Instrukcja obsługi Technical Pro H1502URBT

Technical Pro odbiornik H1502URBT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Technical Pro H1502URBT (13 stron) w kategorii odbiornik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
Professional Hybrid Amplifier
Technical Pro
User Manual for:
H1502UrBT & H2502UrBT & H3502UrBT
with USB & SD Card Inputs
Bluetooth Compatibility
®
Congratulations and thank you for your purchase of this Technical Pro professional hybrid
Series
amplifier. To get the most from your
hybrid,
it is recommended that you review all of the information provided in this instruction manual before operating this equipment.
If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &
sound, and the ultimate in reliability under harsh conditions. And now, Technical Pro offers the same technology in a series of hybrid amplifier
bringing more of what sets Technical Pro apart from all others.
1- Read these instructions thoroughly before using this item.
2- Keep these instructions for future reference.
3- Heed all warnings.
4- Follow all instructions.
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or operate this
product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other apparatuses
(including amplifiers) that produce heat.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than
the other. A grounding plug has two blades and a round grounding prong. The wide blade or third prong is provided for your safety.
If the provided plug does not fit your outlet, consult an electrician for the replacement of the obsolete outlet.
9- Protect the all wires connected to this unit from being walked on or pinched, particularly plugs and the point where they exit from
the unit. When removing the cord from the power outlet, remove it by holding the plug not by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level controls turned DOWN. Once
all the equipment is ON slowly raise the volume or level controls to their proper positions.
13- When grounding this unit, be sure to do so correctly, so as not to defeat the built-in grounding in this unit.
14- When you have finished using this unit, be sure that both tray doors are closed using the open / close button before powering
off the unit.
15- Before placing, installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets, transducers,brackets
and associated equipment for damage. Any missing, corroded, deformed, or non-load rated component could significantly reduce
the strength of the installation, placement or array. Any such condition severely reduces the safety of the installation and should be
immediately corrected. Use only hardware which is rated for the loading conditions of the installation and any possible short-term,
unexpected overloading. Never exceed the rating of the hardware or equipment.
16- Consult a licensed, Professional Engineer regarding physical equipment installation. Ensure that all local, state and national
regulations regarding the safety and operation of equipment are understood and adhered to.
17- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER OF THIS UNIT. THERE
ARE NOUSER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN.
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence
of "dangerous" voltage within the product's enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans. Users should exhibit extra safety when this symbol appears in this instruction manual and
follow all precautions as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in this manual.
Introduction
Hybrid Series
Hybrid Series Front Panel
1.Power:Press this button to power the unit on and off.
2.MP3(1/8”) Input: Connect your MP3 player or computer here.Make sure to press the input selector button (5)
until “MP3” appears on the display screen to play the signal from the MP3 player or computer.
3.
Play / Pause / Record Button:
When the input selected is USB/SD/Bluetooth, press this button to pause
the signal from the USB flash drive,SD card,bluetooth or iPod™(Classic and Nano) connected to the
USB input. Press this button again to play.The play/pause function will only work for the USB flash drive,
SD card, bluetooth or iPod™(Classic and Nano).
THERE IS NO RECORDING FUNCTION WHEN INPUT SELECTED IS USB/SD/BLUETOOTH.
When the input selected is TUNER/MP3/DVD/CD/VCD and there is an USB flash drive or SD card (with
blank space on it) inserted into their respective slot, pressing and holding this button will activate the
recording function.Press this button and hold for several seconds and the word “REC” will display on the
screen.The unit will create a new file in the connected USB flash drive or SD card and get ready to make
a recording. At this point there is no actual recording yet. Press the button again and the unit will start
recording onto the USB flash drive or SD Card and the elapsed time and “REC” will display on the screen.
Press the button a third time to pause the recording and the word “REC” and the elapsed time displayed
on the screen will start flashing. Press again to continue the recording. Press and hold this button for
several seconds to save the file and end the recording and exit. If both USB flash drive and SD card are
connected, the unit will begin recording onto the USB flash drive. If the USB flash drive is full, remove it
and then press the record button again to start another recording. The unit will also be able to record the
signal from microphone onto the USB flash drive or SD Card. When the recording funcion is activated
and there is a microphone connected and have it turned on, the unit will mix the signal from Tuner,MP3
or DVD with the microphone’s into one track.If two microphone are connected and turned on,both signals
from them will be recorded and mixed into one track with the signal from Tuner, MP3 or DVD.
THE RECORDING FILE FORMAT IS .WAV.
4.Repeat and Random Control: Press this button to repeat the current track, all tracks or play random
tracks on the USB flash drive,SD Card or
iPod™(Classic and Nano).The unit’s default setup is repeating
all tracks. Press this button once to repeat the current track, press again to play random tracks, press
three times to repeat all tracks.In tuner mode to save a specific frequency (station), go to the station and
then press the “RPT/RDM” button on the face of unit or the “RPT” key on the remote control and then
using the number keys on the remote enter a number for the saved station. The number entered should
be between1 and 30. After entering the numbers, press the “RPT/RDM” button or “RPT” key again to
save. And the unit will exit the scan and play the station stored.
Hybrid Series
1
2
16 17 18 19
21 22 23 24
20
11
456 7 8 9 10
3
12 13 14 15

Specyfikacje produktu

Marka: Technical Pro
Kategoria: odbiornik
Model: H1502URBT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Technical Pro H1502URBT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje odbiornik Technical Pro

Technical Pro

Technical Pro RX38UR Instrukcja

5 Października 2024
Technical Pro

Technical Pro H1502URBT Instrukcja

5 Października 2024

Instrukcje odbiornik

Najnowsze instrukcje dla odbiornik

Denon

Denon AVR-S900W Instrukcja

15 Października 2024
Pro-Ject

Pro-Ject Amp Box DS2 Instrukcja

15 Października 2024
AKG

AKG HP12U Instrukcja

15 Października 2024
Apart

Apart SBR160 Instrukcja

14 Października 2024
American Audio

American Audio VLP 600 Instrukcja

14 Października 2024
Chord

Chord Anni Instrukcja

14 Października 2024
Sennheiser

Sennheiser EM 9046 SU Instrukcja

14 Października 2024
Yamaha

Yamaha MusicCast RX-V481 Instrukcja

13 Października 2024
JL Audio

JL Audio VX600/6i Instrukcja

12 Października 2024
Pioneer

Pioneer SX-303RDS Instrukcja

10 Października 2024