Instrukcja obsługi Technaxx TX-125

Technaxx kamera TX-125

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Technaxx TX-125 (11 stron) w kategorii kamera. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/11
1
Technaxx® * User Manual
Nature Wild Cam 8MP TX- 125
The Declaration of Conformity for this device is under the Internet link:
www.technaxx.de/ (in bottom bar “Konformitätserklärung”). Before using the device
the first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German xed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
Keep this user manual for future reference or product sharing carefully. Do the same
with the original accessories for this product. In case of warranty, please contact the
dealer or the store where you bought this product. Warranty 2 years
Enjoy your product * Share your experien and opinion on one ce
of the well-known internet portals
Contents
Features ........................................................................................................ 1
Camera overview ........................................................................................... 2
Power supply ................................................................................................. 2
Inserting the memory card ............................................................................. 3
Basic Operations ........................................................................................... 3
Download Files to a computer (2 ways) ......................................................... 9
Technical specications ................................................................................. 9
Features
Security camera battery operated for indoor and outdoor use
Ideal for recording and observing the wildlife and for monitoring houses
FullHD video resolution 1080p
2.4” TFT LCD display (720x320)
1/3.2" CMOS sensor with 8MP
Select functions: video, photo, video & photo
PIR sensor (~18m) & IR range (~ m) for night recordings 18
iggering time 0.5 seconds Tr
t- micophone & speaker Buil in
MicroSD card** up to 32GB (**not included in delivery)
Camera protection class IP56 (dust proof & heavy splash water proof)
2
Camera overview
Inside view
Front view
1
Display screen
10
Down Button
2
Up button / Video button
11
MicroSD card s lot
3
Shot Button
12
AV Jack
4
Right Button
13
Mini USB connector
5
OK Button
14
OFF-TEST-ON Mode
6
Speaker
15
Infrared LEDs
7
Menu Button
16
Lens
8
Left Button
17
Front PIR sensor (motion sensor)
9
Playback Button
18
Side PIR sensor (motion sensor
Power supply
Before use, install pieces of AA batteries* 1.5V (*included) in the correct 8x
polarity. Open the camera case and remove the battery cover.
Extended Information for Power supply
The device does not work with a battery voltage lower than 4V.
The battery life with default video length of 15 seconds will be: 8 hours in
day mode or 1.5 hours in night mode & 2000 videos in day mode or 400
videos in night mode (8xAA batteries installed).
3
Inserting the memory card
The camera has no built- memory, therefore insert a formated (with FAT32) in
MicroSD card** up to 32GB (**not included) for saving les. We suggest to use
class 6 or above high speed card.
Attention: Do not insert the MicroSD card forcibly refer to the marking on the ;
camera. T MicroSD card should have same temperature like the ambient he
temperature. The camera will be short-circuiting inuenced by environment
temperature and humidity. Notice protection for the camera when using it
outdoor.
If the capacity of MicroSD card is full, the camera will stop recording
automatically. The LEDs will go out (when Endless Capture is OFF) .
Press the edge of the card gently to pop- the MicroSD card. out
Basic Operations
Turn On and O the camera
First time start in Test mode select the device language. Not possible in ON
mode!
Switch the MODE button to “Test” to turn on the camera for settings.
Switch the MODE button to “ON” to turn the camera in recording mode.
Switch the MODE button to “Off” to turn off the camera.
System Setup
Switch MODE button to “Test”, then you can set the system parameters.
Press Up/Down button to switch between Video and Photo mode for
manual use in Test mode.
 Press Menu button to open the setup menu.
 Press Up/Down button to scroll through all menus. Then press OK
button to enter the options interface.
 Press Up/Down button to scan all options. And press OK button to
conrm options.
 Press MENU button again to turn back to last menu or exit the
setup menu.
Setup menu and function as below:
Mode: [Photo] / [Video] / [Photo & Video] (default). Select and press OK
button to conrm.
Photo mode
Camera only takes pictures.
Video mode
Camera only records vid eo.
Photo & Video mode
(default)
Camera will take a photo rst,
and then start to record video.

Specyfikacje produktu

Marka: Technaxx
Kategoria: kamera
Model: TX-125

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Technaxx TX-125, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje kamera Technaxx

Technaxx

Technaxx TX-125 Instrukcja

3 Października 2024

Instrukcje kamera

Najnowsze instrukcje dla kamera

Trust

Trust Powerc@m 820 Instrukcja

15 Października 2024
AVerMedia

AVerMedia Live Streamer CAP 4K BU113 Instrukcja

15 Października 2024
Bushnell

Bushnell Trophy Cam 119456 Instrukcja

13 Października 2024
Konica Minolta

Konica Minolta Hi-Matic GF Instrukcja

11 Października 2024
Easypix

Easypix KiddyPix Blizz Instrukcja

10 Października 2024
Samsung

Samsung DV1506F Instrukcja

9 Października 2024
Kogan

Kogan KAUNCAMBLUA Instrukcja

9 Października 2024
Polaroid

Polaroid 600 Series Instrukcja

9 Października 2024
Kogan

Kogan KAKIDINCMRB Instrukcja

8 Października 2024
UniView

UniView IPC3615SB-ADF28(40)KM-I0 Instrukcja

8 Października 2024