Instrukcja obsługi Tascam Porta-02MKII

Tascam Niesklasyfikowane Porta-02MKII

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Tascam Porta-02MKII (24 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

9101411800

OWNER’S MANUAL

Important Safety Instructions .............3

1. An introduction to the Porta02 .......4

1.1 Multitrack recording –

a brief introduction..................4

1.2 Some safety notes and

precautions..............................5

1.3 What you need to make

recordings................................8

1.4 Connecting the Porta02 ..........8

2. Parts of the Porta02 ........................9

3. Making your first recording...........13

3.1 Setting up ..............................13

3.2 Getting ready .........................13

3.3 Setting the level.....................14

3.4 Recording the first track .......15

3.5 Recording the next track ......16

3.6 Recording the stereo

backing ..................................17

3.7 Mixdown ................................18

4. Hints and advanced tips ...............20

4.1 Recording techniques ...........20

4.2 Mixdown ................................21

5. Troubleshooting.............................22

6. Specifications ................................23

Table of Contents

This appliance has a serial number

located on the rear panel. Please record

the model number and serial number

and retain them for your records.

Model number

Serial number

WARNING: TO PREVENT FIRE OR

SHOCK HAZARD, DO NOT

EXPOSE THIS APPLIANCE TO

RAIN OR MOISTURE.

The exclamation point within an equilateral triangle is intended to alert the user to the

presence of important operating and maintenance (servicing) instructions in the liter-

ature accompanying the appliance.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert

the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure

that may be of sufficient magnitude to constitute a risk of electric shock to persons.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT

REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS

INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

Important Safety Instructions

CAUTION:

•Read all of these Instructions.

•Save these Instructions for later use.

•Follow all Warnings and Instructions marked on the

audio equipment.

1) Read Instructions — All the safety and operating

instructions should be read before the product is operated.

2) Retain Instructions — The safety and operating instruc-

tions should be retained for future reference.

3) Heed Warnings — All warnings on the product and in the

operating instructions should be adhered to.

4) Follow Instructions — All operating and use instruc-

tions should be followed.

5) Cleaning — Unplug this product from the wall outlet

before cleaning. Do not use liquid cleaners or aerosol cleaners.

Use a damp cloth for cleaning.

6) Attachments — Do not use attachments not recommend-

ed by the product manufacturer as they may cause hazards.

7) Water and Moisture — Do not use this product near

water _for example, near a bath tub, wash bowl, kitchen sink,

or laundry tub; in a wet basement; or near a swimming pool;

and the like.

8) Accessories — Do not place this product on an unstable

cart, stand, tripod, bracket, or table. The product may fall, caus-

ing serious injury to a child or adult, and serious damage to the

product. Use only with a cart, stand, tripod, bracket, or table

recommended by the manufacturer, or sold with the product.

Any mounting of the product should follow the manufacturer’s

instructions, and should use a mounting accessory recommend-

ed by the manufacturer.

9) A product and cart combination should be moved with care.

Quick stops, excessive force, and uneven surfaces may cause

the product and cart combination to overturn.

15) Lightning — For added protection for this product during

a lightning storm, or when it is left unattended and unused for

long periods of time, unplug it from the wall outlet and discon-

nect the antenna or cable system. This will prevent damage to

the product due to lightning and power-line surges.

16) Power Lines — An outside antenna system should not be

located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines

or circuits. When installing an outside antenna system, extreme

care should be taken to keep from touching such power lines or

circuits as contact with them might be fatal.

17) Overloading — Do not overload wall outlets, extension

cords, or integral convenience receptacles as this can result in

risk of re or electric shock.

18) Object and Liquid Entry — Never push objects of any

kind into this product through openings as they may touch dan-

gerous voltage points or short-out parts that could result in a

re or electric shock. Never spill liquid of any kind on the prod-

uct.

19) Servicing — Do not attempt to service this product your-

self as opening or removing covers may expose you to danger-

ous voltage or other hazards. Refer all servicing to qualied

service personnel.

20) Damage Requiring Service — Unplug this product

from the wall outlet and refer servicing to qualied service per-

sonnel under the following conditions:

a) when the power-supply cord or plug is damaged.

b) if liquid has been spilled, or objects have fallen into the

product.

c) if the product has been exposed to rain or water.

d) if the product does not operate normally by following the

operating instructions. Adjust only those controls that are cov-

ered by the operating instructions as an improper adjustment of

other controls may result in damage and will often require

extensive work by a qualied technician to restore the product

to its normal operation.

e) if the product has been dropped or damaged in any way.

f ) when the product exhibits a distinct change in performance

_ this indicates a need for service.

21) Replacement Parts — When replacement parts are

required, be sure the service technician has used replacement

parts specied by the manufacturer or have the same character-

istics as the original part. Unauthorized substitutions may result

in re, electric shock, or other hazards.

22) Safety Check — Upon completion of any service or

repairs to this product, ask the service technician to perform

safety checks to determine that the product is in proper operat-

ing condition.

23) Wall or Ceiling Mounting — The product should be

mounted to a wall or ceiling only as recommended by the man-

ufacturer.

24) Heat — The product should be situated away from heat

sources such as radiators, heat registers, stoves, or other prod-

ucts (including ampliers) that produce heat.

"Note to CATV system installer:

This reminder is provided to call the CATV system installer’s

attention to Section 820-40 of the NEC which provides guide-

lines for proper grounding and, in particular, species that the

cable ground shall be connected to the grounding system of the

building, as close to the point of cable entry as practical.

10) Ventilation — Slots and openings in the cabinet are pro-

vided for ventilation and to ensure reliable operation of the

product and to protect it from overheating, and these openings

must not be blocked or covered. The openings should never be

blocked by placing the product on a bed, sofa, rug, or other sim-

ilar surface. This product should not be placed in a built-in

installation such as a bookcase or rack unless proper ventilation

is provided or the manufacturer’s instructions have been

adhered to.

11) Power Sources — This product should be operated only

from the type of power source indicated on the marking label.

If you are not sure of the type of power supply to your home,

consult your product dealer or local power company. For prod-

ucts intended to operate from battery power, or other sources,

refer to the operating instructions.

12) Grounding or Polarization — This product may be

equipped with a polarized alternating-current line plug (a plug

having one blade wider than the other). This plug will t into

the power outlet only one way. This is a safety feature. If you

are unable to insert the plug fully into the outlet, try reversing

the plug. If the plug should still fail to t, contact your electri-

cian to replace your obsolete outlet. Do not defeat the safety

purpose of the polarized plug.

13) Power-Cord Protection — Power-supply cords should

be routed so that they are not likely to be walked on or pinched

by items placed upon or against them, paying particular atten-

tion to cords at plugs, convenience receptacles, and the point

where they exit from the product.

14) Outdoor Antenna Grounding — If an outside antenna

or cable system is connected to the product, be sure the anten-

na or cable system is grounded so as to provide some protection

against voltage surges and built-up static charges. Article 810 of

the National Electrical Code, ANSI/NFPA 70, provides infor-

mation with regard to proper grounding of the mast and sup-

porting structure, grounding of the lead-in wire to an antenna

discharge unit, size of grounding conductors, location of anten-

na-discharge unit, connection to grounding electrodes, and

requirements for the grounding electrode.

ANTENNA

LEAD IN

WIRE

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250. PART H)

NEC - NATIONAL ELECTRICAL CODE

ELECTRIC

SERVICE

EQUIPMENT

Example of Antenna Grounding as per

National Electrical Code, ANSI/NFPA 70

GROUND

CLAMP

Specyfikacje produktu

Marka:	Tascam
Kategoria:	Niesklasyfikowane
Model:	Porta-02MKII

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Tascam Porta-02MKII, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Niesklasyfikowane Tascam

Tascam US-1X2 Instrukcja

4 Października 2024

Tascam DR-10L Pro Instrukcja

24 Września 2024

Tascam Porta-02MKII Instrukcja

19 Września 2024

Tascam TC-8 Instrukcja

14 Września 2024

Tascam US-800 Instrukcja

14 Września 2024

Tascam VL-A4 Instrukcja

5 Września 2024

Tascam VSR-264 Instrukcja

22 Sierpnia 2024

Tascam TA-1VP Instrukcja

22 Sierpnia 2024

Tascam IF-AV/DM Instrukcja

21 Sierpnia 2024

Tascam DCP Connect Instrukcja

20 Sierpnia 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024

Stihl HT 70 Instrukcja

15 Października 2024

Ernesto H14270 Instrukcja

15 Października 2024

Uniden BT MIC KIT Instrukcja

15 Października 2024

Vaude Omnis Bike 26 Instrukcja

15 Października 2024

ART ProChannel II Instrukcja

15 Października 2024

Aukey DR02J Instrukcja

15 Października 2024

Master Lock 653EURD Instrukcja

15 Października 2024

Roland FR-18 Diatonic Instrukcja

15 Października 2024